查看文章

The full energy peak efficiency (FEPE) determined by experimental or Monte Carlo (MC) simulation methods is a very important parameter in HPGe detectors. Since FEPE depends on the detector's geometric parameters, the parameters provided by the manufacturer are of great importance in modeling the detector with the MC method. The most important reason for the discrepancy between MC and experimental calculations is the lack of accurate information about the detector's geometric properties. The thickness of the copper contact pin in the middle of the detector hole is not given by the manufacturer. In this study, the effect of copper contact pin thickness on detector efficiency was investigated by using the PHITS 3.24 MC simulation program both at different copper contact pin radii and at different detector-source distances. The efficiency values were calculated for photons in the energy range of 59.5 keV-1408 …