| Modeling of Loads on the Contact Surface. A Pupăzescu, M Tănase Petroleum-Gas University of Ploiesti Bulletin, Technical Series 71 (2), 2019 | | 2019 |
| Comparative study concerning the methods of calculation of the critical axial buckling load for stiffened cylindrical shells M Zaharia, A Pupazescu, CM Petre Revista de Chimie 69 (8), 2000-2004, 2018 | 2 | 2018 |
| The Necessity to Correlate the Measured Values of Stresses with the Values Calculated with Numerical Methods. A Pupăzescu, M Zaharia, CM Petre Petroleum-Gas University of Ploiesti Bulletin, Technical Series 70 (3), 2018 | | 2018 |
| Simulation of the sucker rod column dynamics for different pumping regimes G Toma, A Pupazescu, D Badoiu Revista de Chimie 68 (11), 2593-2596, 2017 | 5 | 2017 |
| Analysis of Stresses in the Bail of a Drilling Swivel CH400. A Pupăzescu, I Lambrescu Petroleum-Gas University of Ploiesti Bulletin, Technical Series 69 (4), 2017 | | 2017 |
| Increasing the Strength of the Buried Pipelines in the Underground Crossing Area. A Pupăzescu, I Popa Petroleum-Gas University of Ploiesti Bulletin, Technical Series 69 (2), 2017 | 1 | 2017 |
| On the Calculation of Strength of a Pipeline Reinforced with Spacing Rings and Sleeve. I Popa, A Pupăzescu Petroleum-Gas University of Ploiesti Bulletin, Technical Series 69 (2), 2017 | | 2017 |
| Research Concerning the Functional Constructive Optimization of the Sucker Rod Pumping Units. G Toma, A Pupăzescu Petroleum-Gas University of Ploiesti Bulletin, Technical Series 68 (2), 2016 | 2 | 2016 |
| Fluid Flow Analysis of Hydraulic Coring System for Offshore Gas Hydrate Research. A Pupăzescu Petroleum-Gas University of Ploiesti Bulletin, Technical Series 68 (2), 2016 | | 2016 |
| Flow velocity as a factor of erosive wear of mud pump valves MB IANCU, V ULMANU, A PUPĂZESCU, A HADĂR UPB Sci. Bull. Ser. D Mech. Eng. 78, 119-30, 2016 | 2 | 2016 |
| Contact Analysis between the Rotor and the Stator of a Progressive Cavity Pump. M Nuşa, V Ulmanu, A Pupăzescu Petroleum-Gas University of Ploiesti Bulletin, Technical Series 68 (1), 2016 | 1 | 2016 |
| Mechanical Stresses in Aerial Crossing Piping Lines with Nonconformities. A Pupăzescu, I Popa Petroleum-Gas University of Ploiesti Bulletin, Technical Series 68 (1), 2016 | | 2016 |
| Buckling analysis of a thin-walled cylindrical shell strengthened by fiber-reinforced polymers G Lvov, A Pupazescu, D Beschetnikov, M Zaharia Materiale Plastice 52 (1), 28-31, 2015 | 7 | 2015 |
| On the calculus of the motor moment of a sucker rod pumping unit G Toma, A PUPAZESCU, D Badoiu Petroleum-Gas University of Ploiesti Bulletin, Technical Series 67 (4), 15-20, 2015 | 2 | 2015 |
| On the Kinematics of Some Sucker Rod Pumping Units. G Toma, A Pupăzescu, D Bădoiu Petroleum-Gas University of Ploiesti Bulletin, Technical Series 66 (3), 2014 | 7 | 2014 |
| About the Hangers Design. A Pupăzescu Petroleum-Gas University of Ploiesti Bulletin, Technical Series 66 (1), 2014 | | 2014 |
| Analysis of Stress Distribution in Casing-Grapple Contact Areas. V Ulmanu, A Pupăzescu Petroleum-Gas University of Ploiesti Bulletin, Technical Series 65 (4), 2013 | | 2013 |
| On a Synthesis Problem of the Mechanism of a Sucker Rod Pumping Unit. G Toma, A Pupăzescu, D Bădoiu Petroleum-Gas University of Ploiesti Bulletin, Technical Series 65 (4), 2013 | 7 | 2013 |
| Studies regarding soil induced stresses in buried steel gas pipes RG RIPEANU, V METEA, A PUPAZESCU ТРИБОЛОГИЧЕН ЖУРНАЛ БУЛТРИБ, 123, 2013 | 3 | 2013 |
| Silos Design by Global Numerical Analysis. A Pupăzescu Petroleum-Gas University of Ploiesti Bulletin, Technical Series 64 (4), 2012 | | 2012 |
