Heat transfer—A review of 2004 literature RM RJ Goldstein, WE Ibele, SV Patankar, TW Simon, TH Kuehn, PJ Strykowski ... International Journal of Heat and Mass Transfer 53, 4343-4396, 2010 | 136* | 2010 |
Heat transfer—A review of 2005 literature RJ Goldstein, WE Ibele, SV Patankar, TW Simon, TH Kuehn, ... International journal of heat and mass transfer 53 (21-22), 4397-4447, 2010 | 136 | 2010 |
Gas injection apparatus and substrate process chamber incorporating same AS Tjandra, K Ghosh, CS Olsen, UM Kelkar US Patent 9,123,758, 2015 | 13 | 2015 |
System and method for substrate processing chambers K Ghosh, S Baluja, MG Kulkarni, S Srivastava, T Ulavi, YA Zhou, ... US Patent 10,600,624, 2020 | 12 | 2020 |
Strategy for TSV scaling with consideration on thermo-mechanical stress and acceptable delay K Ghosh, J Zhang, L Zhang, Y Dong, HY Li, CM Tan, G Xia, CS Tan 2012 7th International Microsystems, Packaging, Assembly and Circuits …, 2012 | 11 | 2012 |
Effect of wake-disturbed flow on heat (mass) transfer to a turbine blade SJ Olson, S Sanitjai, K Ghosh, RJ Goldstein Turbo Expo: Power for Land, Sea, and Air 48845, 899-908, 2009 | 10 | 2009 |
Gas mixing apparatus K Shah, K Ghosh, S Mcclelland US Patent 10,232,324, 2019 | 8 | 2019 |
Process kit including flow isolator ring DR DuBois, K Ghosh, KN Chuc, MG Kulkarni, S Baluja, Y Wang, S Kim US Patent 10,113,231, 2018 | 8 | 2018 |
Faceplate with embedded heater D Hwung, Y Zhang, K Ghosh, K Alayavalli, AK Bansal US Patent 10,889,894, 2021 | 7 | 2021 |
Application of bottom purge to increase clean efficiency K Ghosh, S Baluja, MG Kulkarni US Patent 10,312,076, 2019 | 7 | 2019 |
Process kit for a high throughput processing chamber K Ghosh, MG Kulkarni, S Baluja, KN Chuc, S Kim, Y Wang US Patent 10,017,855, 2018 | 7 | 2018 |
Loadlock Integrated Bevel Etcher System US Patent App. 15/013,547, 2017 | 7* | 2017 |
Pumping apparatus and method for substrate processing chambers K Ghosh, D Blahnik, AK Bansal, TA Nguyen US Patent 11,078,568, 2021 | 6 | 2021 |
Effect of inlet skew on heat/mass transfer from a simulated turbine blade K Ghosh, RJ Goldstein | 6 | 2012 |
Effect of inlet skew on heat/mass transfer from a simulated turbine blade K Ghosh, RJ Goldstein Turbo Expo: Power for Land, Sea, and Air 54655, 1677-1687, 2011 | 6 | 2011 |
Horizontal heat choke faceplate design Y Zhang, D Hwung, A Agarwal, K Alayavalli, K Ghosh US Patent 10,907,252, 2021 | 5 | 2021 |
Enhanced lift pin design to eliminate local thickness non-uniformity in teos oxide films K Ghosh, MG Kulkarni, S Baluja, K Nittala US Patent 10,490,436, 2019 | 5 | 2019 |
High temperature faceplate with thermal choke and cooling Y Zhang, S Baluja, K Alayavalli, K Ghosh, D Hwung US Patent App. 16/255,120, 2019 | 5 | 2019 |
CHAMBER LINER FOR HIGH TEMPERATURE PROCESSING S Baluja, R Duan, K Ghosh US Patent App. 15/434,853, 2017 | 5 | 2017 |
Effect of upstream wall shear on flow and mass (heat) transfer on a flat plate downstream of a shear inducing moving wall-a review K Ghosh, RJ Goldstein Journal of Enhanced Heat Transfer 21 (4-5), 2014 | 5 | 2014 |