| Modeling and analyzing the effects of periodic inspection on the performance of safety-critical systems JV Bukowski IEEE Transactions on Reliability 50 (3), 321-329, 2001 | 120 | 2001 |
| Defining mean time-to-failure in a particular failure-state for multi-failure-state systems JV Bukowski, WM Goble IEEE transactions on reliability 50 (2), 221-228, 2001 | 57 | 2001 |
| Using Markov models for safety analysis of programmable electronic systems JV Bukowski, WM Goble ISA Transactions 34 (2), 193-198, 1995 | 57 | 1995 |
| Incorporating process demand into models for assessment of safety system performance JV Bukowski RAMS'06. Annual Reliability and Maintainability Symposium, 2006., 577-581, 2006 | 49 | 2006 |
| A comparison of techniques for computing PFD average JV Bukowski Annual Reliability and Maintainability Symposium, 2005. Proceedings., 590-595, 2005 | 43 | 2005 |
| Using Markov models to compute probability of failed dangerous when repair times are not exponentially distributed JV Bukowski RAMS'06. Annual Reliability and Maintainability Symposium, 2006., 273-277, 2006 | 32 | 2006 |
| Development of a mechanical component failure database WM Goble, JV Bukowski 2007 Annual Reliability and Maintainability Symposium, 451-455, 2007 | 28 | 2007 |
| Verifying common-cause reduction rules for fault tolerant systems via simulation using a stress–strength failure model JV Bukowski, WM Goble ISA transactions 40 (2), 183-190, 2001 | 28 | 2001 |
| Impact of proof test effectiveness on safety instrumented system performance JV Bukowski, I van Beurden 2009 Annual Reliability and Maintainability Symposium, 157-163, 2009 | 27 | 2009 |
| Using stress-strain simulations to characterize common cause WM Goble, AC Brombacher, JV Bukowski Mosleh A, Bari RA, Probabilistic SafetyAssessment andManagement (PSAM4 …, 1998 | 21 | 1998 |
| Analysis of pressure relief valve proof test data JV Bukowski, WM Goble Process Safety Progress 28 (1), 24-29, 2009 | 20 | 2009 |
| Validation of a mechanical component constant failure rate database JV Bukowski, WM Goble 2009 Annual Reliability and Maintainability Symposium, 338-343, 2009 | 16 | 2009 |
| How diagnostic coverage improves safety in programmable electronic systems WM Goble, JV Bukowski, AC Brombacher ISA transactions 36 (4), 345-350, 1997 | 16 | 1997 |
| Analysis of spring operated pressure relief valve proof test data: Findings and implications JV Bukowski, WM Goble, RE Gross, SP Harris Process Safety Progress 37 (4), 467-477, 2018 | 14 | 2018 |
| Results of root cause analyses of spring operated pressure relief valve failures JV Bukowski, RE Gross Proceedings of the AIChE 6th Global Congress on Process Safety, 12th Process …, 2010 | 13 | 2010 |
| Probability of initial failure for spring operated relief valves JV Bukowski, RE Gross, WM Goble Pressure Vessels and Piping Conference 44519, 585-595, 2011 | 12 | 2011 |
| Reliability analysis of controllers for safety shutdown systems JV Bukowski, WM Goble Proc. Ninth Int'l. Conf. ISQA, 242-247, 1992 | 12 | 1992 |
| On the determination of large-scale system reliability JV Bukowski IEEE Transactions on Systems, Man, and Cybernetics 12 (4), 538-548, 1982 | 12 | 1982 |
| The Adhesion Failure Mode in Stainless Steel Trim Spring-Operated Pressure Relief Valves JV Bukowski, RE Gross, WM Goble Journal of Pressure Vessel Technology 135 (6), 064502, 2013 | 11 | 2013 |
| The case for architecture-specific common cause failure rates and how they affect system performance JV Bukowski, A Lele Annual Reliability and Maintainability Symposium, 153-158, 1997 | 11 | 1997 |
