| A rapid compression machine for chemical kinetics studies at elevated pressures and temperatures G Mittal, CJEN SUNG* Combustion Science and Technology 179 (3), 497-530, 2007 | 290 | 2007 |
| Aerodynamics inside a rapid compression machine G Mittal, CJ Sung Combustion and flame 145 (1-2), 160-180, 2006 | 255 | 2006 |
| Autoignition of ethanol in a rapid compression machine G Mittal, SM Burke, VA Davies, B Parajuli, WK Metcalfe, HJ Curran Combustion and Flame 161 (5), 1164-1171, 2014 | 212 | 2014 |
| An aerosol rapid compression machine for studying energetic-nanoparticle-enhanced combustion of liquid fuels C Allen, G Mittal, CJ Sung, E Toulson, T Lee Proceedings of the Combustion Institute 33 (2), 3367-3374, 2011 | 209 | 2011 |
| Dimethyl ether autoignition in a rapid compression machine: Experiments and chemical kinetic modeling G Mittal, M Chaos, CJ Sung, FL Dryer Fuel Processing Technology 89 (12), 1244-1254, 2008 | 209 | 2008 |
| Autoignition of H2/CO at elevated pressures in a rapid compression machine G Mittal, CJ Sung, RA Yetter International Journal of Chemical Kinetics 38 (8), 516-529, 2006 | 194 | 2006 |
| An experimental investigation of ethylene/O2/diluent mixtures: Laminar flame speeds with preheat and ignition delays at high pressures K Kumar, G Mittal, CJ Sung, CK Law Combustion and Flame 153 (3), 343-354, 2008 | 145 | 2008 |
| Autoignition of toluene and benzene at elevated pressures in a rapid compression machine G Mittal, CJ Sung Combustion and Flame 150 (4), 355-368, 2007 | 141 | 2007 |
| Autoignition of n-decane under elevated pressure and low-to-intermediate temperature conditions K Kumar, G Mittal, CJ Sung Combustion and Flame 156 (6), 1278-1288, 2009 | 112 | 2009 |
| Ignition delay study of moist hydrogen/oxidizer mixtures using a rapid compression machine AK Das, CJ Sung, Y Zhang, G Mittal International journal of hydrogen energy 37 (8), 6901-6911, 2012 | 94 | 2012 |
| Significance of the HO2+ CO reaction during the combustion of CO+ H2 mixtures at high pressures G Mittal, CJ Sung, M Fairweather, AS Tomlin, JF Griffiths, KJ Hughes Proceedings of the combustion Institute 31 (1), 419-427, 2007 | 92 | 2007 |
| CFD modeling of two-stage ignition in a rapid compression machine: Assessment of zero-dimensional approach G Mittal, MP Raju, CJ Sung Combustion and Flame 157 (7), 1316-1324, 2010 | 90 | 2010 |
| Autoignition of methylcyclohexane at elevated pressures G Mittal, CJ Sung Combustion and Flame 156 (9), 1852-1855, 2009 | 75 | 2009 |
| Computational fluid dynamics modeling of hydrogen ignition in a rapid compression machine G Mittal, MP Raju, CJ Sung Combustion and Flame 155 (3), 417-428, 2008 | 72 | 2008 |
| Vortex formation in a rapid compression machine: Influence of physical and operating parameters G Mittal, MP Raju, CJ Sung Fuel 94, 409-417, 2012 | 59 | 2012 |
| A rapid compression machine: design, characterization, and autoignition investigations G Mittal Case Western Reserve University, 2006 | 58 | 2006 |
| A computationally efficient, physics-based model for simulating heat loss during compression and the delay period in RCM experiments SS Goldsborough, C Banyon, G Mittal Combustion and Flame 159 (12), 3476-3492, 2012 | 54 | 2012 |
| A rapid compression machine with crevice containment G Mittal, A Bhari Combustion and flame 160 (12), 2975-2981, 2013 | 52 | 2013 |
| Methodology to account for multi-stage ignition phenomena during simulations of RCM experiments SS Goldsborough, G Mittal, C Banyon Proceedings of the Combustion Institute 34 (1), 685-693, 2013 | 47 | 2013 |
| Homogeneous charge compression ignition of binary fuel blends G Mittal, CJ Sung Combustion and flame 155 (3), 431-439, 2008 | 42 | 2008 |
Chih-Jen SungProfessor of Mechanical Engineering Department, University of Connecticut在 engr.uconn.edu 的电子邮件经过验证
