| Optimizing tube hydroforming using process simulation and experimental verification Y Aue-U-Lan, G Ngaile, T Altan Journal of Materials Processing Technology 146 (1), 137-143, 2004 | 216 | 2004 |
| On the characteristics of tubular materials for hydroforming—experimentation and analysis M Koç, T Altan International Journal of Machine Tools and Manufacture 41 (5), 761-772, 2001 | 141 | 2001 |
| Formability in AA5083 and AA6061 alloys for light weight applications J Liu, MJ Tan, S Castagne Materials & Design 31, S66-S70, 2010 | 53 | 2010 |
| Superplastic-like forming of non-superplastic AA5083 combined with mechanical pre-forming J Liu, MJ Tan, Y Aue-u-lan, AEW Jarfors, KS Fong, S Castagne The International Journal of Advanced Manufacturing Technology 52, 123-129, 2011 | 48 | 2011 |
| Superplastic-like forming of Ti-6Al-4V alloy J Liu, MJ Tan, Y Aue-u-lan, M Guo, S Castagne, BW Chua The International Journal of Advanced Manufacturing Technology 69, 1097-1104, 2013 | 33 | 2013 |
| The influence of die geometry and workpiece mechanical properties in T-Shape friction test M Taureza, S Castagne, SCV Lim Journal of Materials Processing Technology 212 (11), 2413-2423, 2012 | 21 | 2012 |
| Feasible pressure and axial feed path determination for fuel filler tube hydroforming by genetic algorithm T Intarakumthornchai, Y Aue-U-Lan, R Kesvarakul, S Jirathearanat Proceedings of the Institution of Mechanical Engineers, Part B: Journal of …, 2015 | 19 | 2015 |
| Improving the formability limts of lightweight metal alloy sheet using advanced processes-finite element modeling and experimental validation S Kaya The Ohio State University, 2008 | 14 | 2008 |
| Micromachining microchannels on cyclic olefin copolymer (COC) substrates with the taguchi method PC Chen, RH Zhang, Y Aue-u-Lan, GE Chang Micromachines 8 (9), 264, 2017 | 10 | 2017 |
| Yingyot Aue-u-lan and Taylan Altan. 2001.«On the characteristics of tubular materials for hydroforming-experimentation and analysis» M Koç International Journal of Machine Tools and Manufacture 41 (5), 761-772, 0 | 10 | |
| Investigation of the “surface dimple” defect occurring during the production of an electric upsetting process by viscoplastic finite element modeling P Nuasri, Y Aue-u-lan The International Journal of Advanced Manufacturing Technology 98, 1047-1057, 2018 | 9 | 2018 |
| Determination and analysis of critical damage criteria for predicting fracture in forming process by uniaxial tensile test S Niemsakul, N Sae-Eawa, Y Aue-U-Lan Materials Today: Proceedings 5 (3), 9642-9650, 2018 | 7 | 2018 |
| Mechanical property determination for combined sheet and bulk metal forming process by plane strain compression test N Sae-Eaw, Y Aue-U-Lan Materials Today: Proceedings 5 (3), 9376-9383, 2018 | 7 | 2018 |
| Influence of process parameters on electric upsetting process by using finite element modeling P Nuasri, Y Aue-u-Lan Key Engineering Materials 728, 42-47, 2017 | 7 | 2017 |
| Evaluation of forging die defect by considering plastic deformation and abrasive wear in a hot forged axle shaft C Tavichaiyuth, Y Aue-u-Lan, T Hart-Rawung Applied Science and Engineering Progress 14 (1), 60-71, 2021 | 6 | 2021 |
| Capability development of progressive extrusion forming of hollow miniature/micro pin form sheet D Atsushi, CC Wong, SCV Lim, Y Aue-u-lan, MQ Chew International Forum on Micro Manufacturing Gifu, Japan, 241-246, 2010 | 6 | 2010 |
| Hydroforming of tubular materials at various temperatures Y Aue-u-lan The Ohio State University, 2007 | 6 | 2007 |
| Investigation of process parameters in superplastic forming of mechanical pre-formed sheet by FEM J Liu, MJ Tan, S Castagne, Y Aue-U-Lan, KS Fong, AWE Jarfors Key Engineering Materials 447, 437-441, 2010 | 5 | 2010 |
| Warm forming magnesium, aluminum tubes—A high-temperature process for lightweight alloys Y AUE-U-LAN, JA ESNALOA, D GUZA, T ALTAN 2006-10-03]. http://www. thefabricator. com, 2009 | 5 | 2009 |
| State of the art visions & priorities in research & development on metal forming T Altan Proc. 8th ICTP, 2005, 2005 | 5 | 2005 |
