| Effect of fibre orientation on novel continuous 3d-printed fibre-reinforced composites I Papa, AT Silvestri, MR Ricciardi, V Lopresto, A Squillace Polymers 13 (15), 2524, 2021 | 40 | 2021 |
| Electron beam melting of Ti6Al4V: Role of the process parameters under the same energy density AT Silvestri, S Foglia, R Borrelli, S Franchitti, C Pirozzi, A Astarita Journal of Manufacturing Processes 60, 162-179, 2020 | 39 | 2020 |
| Assessment of the mechanical properties of AlSi10Mg parts produced through selective laser melting under different conditions AT Silvestri, A Astarita, A El Hassanin, A Manzo, U Iannuzzo, G Iannuzzo, ... Procedia Manufacturing 47, 1058-1064, 2020 | 29 | 2020 |
| Dissimilar friction stir lap welding of AA2198-AA6082: Process analysis and joint characterization F Tucci, P Carlone, AT Silvestri, H Parmar, A Astarita CIRP Journal of Manufacturing Science and Technology 35, 753-764, 2021 | 28 | 2021 |
| On the critical technological issues of CFF: enhancing the bearing strength AT Silvestri, I Papa, F Rubino, A Squillace Materials and Manufacturing Processes 37 (2), 123-135, 2022 | 22 | 2022 |
| Rotation-assisted abrasive fluidised bed machining of AlSi10Mg parts made through selective laser melting technology A El Hassanin, M Troiano, F Scherillo, AT Silvestri, V Contaldi, ... Procedia Manufacturing 47, 1043-1049, 2020 | 22 | 2020 |
| Dissimilar friction stir lap welding of AA2198 and AA7075 sheets: Forces, microstructure and mechanical properties A Astarita, F Tucci, AT Silvestri, M Perrella, L Boccarusso, P Carlone The International Journal of Advanced Manufacturing Technology 117, 1045-1059, 2021 | 20 | 2021 |
| Fluidised bed machining of metal additive manufactured parts AE Hassanin, M Troiano, AT Silvestri, V Contaldi, F Scherillo, R Solimene, ... AIP conference proceedings 2113 (1), 2019 | 17 | 2019 |
| Laser-powder bed fusion of pre-mixed Inconel718-Cu powders: An experimental study A El Hassanin, AT Silvestri, F Napolitano, F Scherillo, A Caraviello, ... Journal of Manufacturing Processes 71, 329-344, 2021 | 13 | 2021 |
| Influence of abrasive materials in fluidised bed machining of AlSi10Mg parts made through selective laser melting technology A El Hassanin, M Troiano, AT Silvestri, V Contaldi, F Scherillo, ... Key engineering materials 813, 129-134, 2019 | 13 | 2019 |
| Mechanical properties optimization of Cr3C2-NiCr coatings produced by compact plasma spray process F Rubino, D Merino, AT Silvestri, C Munez, P Poza Surface and Coatings Technology 465, 129570, 2023 | 9 | 2023 |
| Heat treatment of inconel selective laser melted parts: Microstructure evolution AE Hassanin, F Scherillo, AT Silvestri, A Caraviello, R Sansone, A Astarita, ... AIP Conference Proceedings 2113 (1), 2019 | 9 | 2019 |
| Innovative Fusion Strategy for MEMS Redundant-IMU Exploiting Custom 3D Components G de Alteriis, AT Silvestri, C Conte, V Bottino, E Caputo, A Squillace, ... Sensors 23 (5), 2508, 2023 | 8 | 2023 |
| Pin-bearing mechanical behaviour of continuous reinforced Kevlar fibre composite fabricated via fused filament fabrication L Giorleo, I Papa, AT Silvestri Progress in Additive Manufacturing 7 (4), 723-735, 2022 | 8 | 2022 |
| Direct Laser Deposition for Tailored Structure AT Silvestri, S Amirabdollahian, M Perini, P Bosetti, A Squillace Prof. Anne Marie Habraken, 2021 | 7 | 2021 |
| Influence of Fibre Fill Pattern and Stacking Sequence on Open-Hole Tensile Behaviour in Additive Manufactured Fibre-Reinforced Composites AT Silvestri, I Papa, A Squillace Materials 16 (6), 2411, 2023 | 6 | 2023 |
| Understanding the friction behavior of niobium sheets during forming processes AT Silvestri, A Astarita, L Boccarusso, AA Carvalho, M Durante, ... Journal of Materials Engineering and Performance 29, 3055-3066, 2020 | 6 | 2020 |
| Friction welding: An effective joining process for hybrid additive manufacturing M Dwivedi, AT Silvestri, S Franchitti, H Krishnaswamy, ... CIRP Journal of Manufacturing Science and Technology 35, 460-473, 2021 | 5 | 2021 |
| Investigation of the laser-related parameters in Laser-Powder Bed Fusion of Inconel 718-Cu blends at fixed Volumetric Energy Density A El Hassanin, AT Silvestri, F Napolitano, D Borrelli, A Caraviello, ... Journal of Manufacturing Processes 99, 456-468, 2023 | 4 | 2023 |
| Stationary shoulder friction stir processing: influence of tool wear on surface properties F Impero, F Scherillo, AT Silvestri, R Casarin, A Astarita, A Squillace Key Engineering Materials 813, 393-398, 2019 | 4 | 2019 |
