| Efficiency improvement of solar photovoltaic/solar air collectors by using impingement jets: A review R Nadda, A Kumar, R Maithani Renewable and Sustainable Energy Reviews 93, 331-353, 2018 | 100 | 2018 |
| Developing heat transfer and friction loss in an impingement jets solar air heater with multiple arc protrusion obstacles R Nadda, A Kumar, R Maithani Solar Energy 158, 117-131, 2017 | 73 | 2017 |
| Experimental investigation and optimization of cobalt bonded tungsten carbide composite by hybrid AHP-TOPSIS approach R Nadda, R Kumar, T Singh, R Chauhan, A Patnaik, B Gangil Alexandria engineering journal 57 (4), 3419-3428, 2018 | 48 | 2018 |
| Optimization of single arc protrusion ribs parameters in solar air heater with impinging air jets based upon PSI approach R Nadda, R Kumar, A Kumar, R Maithani Thermal Science and Engineering Progress 7, 146-154, 2018 | 48 | 2018 |
| Performance investigation of a solar thermal collector provided with air jets impingement on multi V-shaped protrusion ribs absorber plate R Kumar, R Nadda, A Rana, R Chauhan, SS Chandel Heat and Mass Transfer 56, 913-930, 2020 | 46 | 2020 |
| Influence of artificial roughness parametric variation on thermal performance of solar thermal collector: An experimental study, response surface analysis and ANN modelling R Kumar, R Nadda, S Kumar, A Razak, M Sharifpur, HS Aybar, CA Saleel, ... Sustainable Energy Technologies and Assessments 52, 102047, 2022 | 45 | 2022 |
| Optimization of multiple arcs protrusion obstacle parameters using AHP-TOPSIS approach in an impingement jet solar air passage PK Mishra, R Nadda, R Kumar, A Rana, M Sethi, A Ekileski Heat and Mass Transfer 54, 3797-3808, 2018 | 43 | 2018 |
| Investigation of thermal and hydrodynamic performance of impingement jets solar air passage with protrusion with combination arc obstacle on the heated plate R Nadda, A Kumar, R Maithani, R Kumar Experimental Heat Transfer 31 (3), 232-250, 2018 | 43 | 2018 |
| Thermo-hydraulic efficiency and correlation development of an indoor designed jet impingement solar thermal collector roughened with discrete multi-arc ribs R Kumar, S Kumar, R Nadda, K Kumar, V Goel Renewable Energy 189, 1259-1277, 2022 | 42 | 2022 |
| Heat transfer and friction factor correlations for an impinging air jets solar thermal collector with arc ribs on an absorber plate R Kumar, R Nadda, S Kumar, K Kumar, A Afzal, RKA Razak, M Sharifpur Sustainable Energy Technologies and Assessments 47, 101523, 2021 | 37 | 2021 |
| Single-phase thermal and hydraulic performance analysis of a V-pattern dimpled obstacles air passage A Kumar, R Kumar, R Chauhan, M Sethi, A Kumari, N Verma, R Nadda Experimental Heat Transfer 30 (5), 393-426, 2017 | 34 | 2017 |
| An experimental study of heat transfer enhancement in an air channel with broken multi type V-baffles A Kumar, R Kumar, R Maithani, R Chauhan, S Kumar, R Nadda Heat and Mass Transfer 53, 3593-3612, 2017 | 31 | 2017 |
| Effect of multiple arc protrusion ribs on heat transfer and fluid flow of a circular-jet impingement solar air passage R Nadda, R Maithani, A Kumar Chemical Engineering and Processing-Process Intensification 120, 114-133, 2017 | 29 | 2017 |
| Convective heat transfer enhancement using impingement jets in channels and tubes: a comprehensive review R Kumar, R Nadda, S Kumar, S Saboor, CA Saleel, M Abbas, A Afzal, ... Alexandria Engineering Journal 70, 349-376, 2023 | 24 | 2023 |
| A review of different twisted tape configurations used in heat exchanger and their impact on thermal performance of the system R Khargotra, R Kumar, R Nadda, S Dhingra, T Alam, D Dobrota, ... Heliyon 9 (6), 2023 | 20 | 2023 |
| Thermal modeling of single discharge in prospect of tool wear compensation in μEDM R Nadda, CK Nirala The International Journal of Advanced Manufacturing Technology, 2020 | 18 | 2020 |
| A systematic review of real-time fine-needle aspiration biopsy methods for soft tissues R Nadda, AK Sahani, R Repaka IETE Technical Review 39 (5), 1011-1026, 2022 | 11 | 2022 |
| Modelling and simulation based surface characterization of reverse-µEDM fabricated micro pin-fins H Kishore, R Nadda, CK Nirala, A Agrawal Procedia CIRP 81, 1230-1235, 2019 | 10 | 2019 |
| Tool wear compensation in micro-EDM R Nadda, CK Nirala, P Saha Micro-electrical Discharge Machining Processes: Technologies and …, 2019 | 9 | 2019 |
| Finite element simulation of multilayer model to simulate fine needle insertion mechanism into iliac crest for bone marrow biopsy R Nadda, R Repaka, AK Sahani Computer Methods in Biomechanics and Biomedical Engineering, 1-16, 2022 | 8 | 2022 |
Dr. Raj KumarProfessor (Assistant), Gachon University, Global Campus, Republic of Korea在 gachon.ac.kr 的电子邮件经过验证
