| Prediction of cutting forces by using machine parameters in end milling process AF Ibraheem, SK Shather, KA Khalaf Eng. &Tech 26 (11), 1-4, 2008 | 24 | 2008 |
| Studying the effect of tool nose radius on workpiece run out and surface finish SK Shather Eng. & Tech. Journal 27 (2), 256-261, 2009 | 12 | 2009 |
| Investigate WEDM process parameters on wire wear ratio, material removal rate and surface roughness of steel 1012 AISI MT Mohammed Engineering and Technology Journal 36 (3 Part A), 2018 | 8 | 2018 |
| The influence of design and technological parameters on the MAF process S kariem Shather, SM Mousa Al-Khwarizmi engineering journal 11 (4), 82-88, 2015 | 8 | 2015 |
| Parameters analysis in wire electrical discharge machine process of titanium alloys with dielectric alumina AB Sapit, SK Shather, FN Abed Materials Today: Proceedings 42, 1854-1859, 2021 | 7 | 2021 |
| Enhancement of the performance surface roughness of wire cutting process by additives Nano [AL2O3] SKSFNA Azwan Bin Sapit1 Periodicals of Engineering and Natural Sciences 8, 933- 94, 2020 | 7 | 2020 |
| Studying abrasive flow machining conditions by using Taguchi method AF Ibrahim, SK Shather, WK Hamdan Eng Technol J 32 (4), 2014 | 7 | 2014 |
| Influence of intervening variables on surface roughness and material removal rate during WEDM process SK Shather, DAK Noori Engineering & Technology Journal 32 (2), 1141-1148, 2014 | 7 | 2014 |
| Enhancement the thermal effects produce by EDM using hybrid machining SK Shather, SH Aghdeab, WS Khudhier IOP Conference Series: Materials Science and Engineering 518 (3), 032016, 2019 | 6 | 2019 |
| Prediction of surface roughness in end-milling with multiple regression model SK Shather, AF Ibrheem Engineering and Technology 26, 2008 | 6 | 2008 |
| Improve the Micro-hardness of Single Point incremental forming product using magnetic abrasive finishing BA Ahmed, SK Shather, WK Hamdan Engineering and Technology Journal 38 (8A), 1137-1142, 2020 | 5 | 2020 |
| Enhancement of surface roughness and metal removal rate by using combined abrasives during magnetic abrasive finishing SK Shather IMPACT Int. J. Res. Eng. Technol 7, 1-8, 2019 | 5 | 2019 |
| Influence Of Silicon Carbide (Sic) Abrasive On Surface Roughness And Metal Removal Rate During Magnetic Abrasive Finishing SK Shather, M Abdal-khadim Abd Alaqeeli Global Journal Of Engineering Science And Research Management, ISSN, 2349-4506, 2019 | 5 | 2019 |
| Statistical analysis of metal removal during magnetic abrasive finishing process BA Ahmed, SK Shather, WK Hamdan Journal of Engineering 26 (8), 34-45, 2020 | 4 | 2020 |
| Effect of Si-Cu Electrode on material removal rate , tool wear and surface roughness in EDM process SKS Yousif Qasim Journal of engineering and technology, 2020 | 4* | 2020 |
| EXPERIMENTAL INVESTIGATION TO PREDICT METAL REMOVAL AND SURFACE ROUGHNESS IN WIRE CUT PROCESS DAN Saad Kariem Shather 1, Abbas Fadhil Ibrahim 2 Diyala Journal of Engineering Sciences 9 (No 3), 49-58, 2016 | 4 | 2016 |
| Influence of additive alumina nanopowder on surface roughness during WEDM process FN Abed, SK Shather IOP Conference Series: Materials Science and Engineering 1094 (1), 012139, 2021 | 3 | 2021 |
| Investigation the Effect of Negative Polarity of Surface Roughness and Metal Removal Rate During EDM Process SA Taqi, SK Shather J. Eng. Technol 38 (12A), 1852-1861, 2020 | 3 | 2020 |
| Enhancement of EDM Performance by Using Copper-Silver Composite Electrode SK Shather, AF Ibrahim, ZH Mohsein, OH Hassoon Engineering and Technology Journal 38 (9A), 1352-1358, 2020 | 3 | 2020 |
| Influence of polarity of electro discharge machine (EDM) on surface roughness (SR) and metal removal rate (MRR) of low carbon steel S Taqi, SK Shather Engineering and Technology Journal 38 (7A), 975-983, 2020 | 3 | 2020 |
