Multi-objective optimization of multi-axis ball-end milling Inconel 718 via grey relational analysis coupled with RBF neural network and PSO algorithm J Zhou, J Ren, C Yao Measurement 102, 271-285, 2017 | 126 | 2017 |
Analysis and optimization of cutter geometric parameters for surface integrity in milling titanium alloy using a modified grey–Taguchi method J Ren, J Zhou, J Zeng Proceedings of the Institution of Mechanical Engineers, Part B: Journal of …, 2016 | 38 | 2016 |
A modified parallel-sided shear zone model for determining material constitutive law J Zhou, J Ren, Y Feng, W Tian, K Shi The International Journal of Advanced Manufacturing Technology 91, 589-603, 2017 | 26 | 2017 |
Optimization of cutter geometric parameters in end milling of titanium alloy using the grey-Taguchi method J Ren, J Zhou, J Wei Advances in Mechanical Engineering 7 (2), 721093, 2015 | 26 | 2015 |
Measurement point sampling method for inspection of parts with free-form surfaces D Zhao, W Wang, J Zhou, R Jiang, K Cui, Q Jin Advances in mechanical engineering 10 (11), 1687814018809577, 2018 | 25 | 2018 |
Inverse determination of improved constitutive equation for cutting titanium alloy Ti-6Al-4V based on finite element analysis J Ren, J Cai, J Zhou, K Shi, X Li The International Journal of Advanced Manufacturing Technology 97, 3671-3682, 2018 | 24 | 2018 |
Mechanics-based feedrate scheduling for multi-axis plunge milling Y Liang, J Ren, D Zhang, X Li, J Zhou The International Journal of Advanced Manufacturing Technology 79 (1-4), 123-133, 2015 | 19 | 2015 |
Dynamic modal prediction and experimental study of thin-walled workpiece removal based on perturbation method W Tian, J Ren, J Zhou, D Wang The International Journal of Advanced Manufacturing Technology 94, 2099-2113, 2018 | 18 | 2018 |
Predicting cutting force with unequal division parallel-sided shear zone model for orthogonal cutting J Zhou, J Ren The International Journal of Advanced Manufacturing Technology 107, 4201-4211, 2020 | 15 | 2020 |
Tool determination and geometry parameter optimization of carbide tool in high-speed milling of third-generation γ-TiAl alloy J Ren, Z Zhai, K Shi, J Zhou, J Yang, J Cai Journal of the Brazilian Society of Mechanical Sciences and Engineering 40, 1-13, 2018 | 14 | 2018 |
Residual stress generation and evaluation in milling: a review X Jiang, Y Wei, J Zhou, K Zhan, Z Ding, SY Liang The International Journal of Advanced Manufacturing Technology 126 (9), 3783 …, 2023 | 11 | 2023 |
Grey-RBF-FA method to optimize surface integrity for inclined end milling Inconel 718 J Zhou, J Ren, W Tian The International Journal of Advanced Manufacturing Technology 91, 2975-2993, 2017 | 11 | 2017 |
Determining residual stress profile induced by end milling from measured thin plate deformation J Zhou, Q Qi, Q Liu, Z Wang, J Ren Thin-Walled Structures 200, 111862, 2024 | 10 | 2024 |
Correlation analysis of microstructure evolution on microhardness and residual stress for cutting Ti-6Al-4V titanium alloy ZY Wang, JX Ren, JH Zhou, J Cai Proceedings of the Institution of Mechanical Engineers, Part B: Journal of …, 2023 | 9 | 2023 |
航空发动机机匣数控加工变形控制方法 任军学, 杨俊, 周金华, 姚倡锋, 余杰, 刘智武 航空制造技术 57 (23/24), 96-99, 2014 | 8 | 2014 |
Numerical simulation for behavior of a droplet impacting onto a target spherical surface YE Wang, JH Zhou, YL Qin, PL Li, MM Yang, Q Han, YB Wang, SM Wei Zhendong yu Chongji(Journal of Vibration and Shock) 31 (20), 2012 | 6 | 2012 |
Hybrid prediction model for residual stress profile induced by multi-axis milling Ti-6Al-4 V titanium alloy combined finite element with experiment Z Wang, J Zhou, J Ren, A Shu The International Journal of Advanced Manufacturing Technology 126 (9), 4495 …, 2023 | 4 | 2023 |
Predicting surface residual stress for multi-axis milling of Ti-6Al-4V titanium alloy in combined simulation and experiments Z Wang, J Zhou, J Ren, A Shu Materials 15 (18), 6471, 2022 | 4 | 2022 |
A modified constitutive model considering dynamic recrystallization behavior for cutting Inconel 718 A Shu, J Zhou, J Ren, Z Wang Journal of Manufacturing Processes 104, 189-204, 2023 | 2 | 2023 |
Dimensional Deviation Estimation for Parts with Free‐Form Surfaces D Zhao, W Wang, J Zhou, K Cui, Q Jin Mathematical Problems in Engineering 2018 (1), 4390284, 2018 | 2 | 2018 |