| Recent advances and challenges of abrasive jet machining R Melentiev, F Fang CIRP Journal of Manufacturing Science and technology 22, 1-20, 2018 | 140 | 2018 |
| Metallization of polymers and composites: State-of-the-art approaches R Melentiev, A Yudhanto, R Tao, T Vuchkov, G Lubineau Materials & Design 221, 110958, 2022 | 84 | 2022 |
| Effects of tool geometry and process parameters on delamination in CFRP drilling: An overview R Melentiev, PC Priarone, M Robiglio, L Settineri Procedia Cirp 45, 31-34, 2016 | 81 | 2016 |
| Polymer metallization via cold spray additive manufacturing: A review of process control, coating qualities, and prospective applications R Melentiev, N Yu, G Lubineau Additive manufacturing 48, 102459, 2021 | 73 | 2021 |
| Theoretical study on particle velocity in micro-abrasive jet machining R Melentiev, F Fang Powder technology 344, 121-132, 2019 | 53 | 2019 |
| Study on surface roughness generated by micro-blasting on Co-Cr-Mo bio-implant R Melentiev, C Kang, G Shen, F Fang Wear 428, 111-126, 2019 | 43 | 2019 |
| Fabrication of micro-channels on Co–Cr–Mo joints by micro-abrasive jet direct writing R Melentiev, F Fang Journal of Manufacturing Processes 56, 667-677, 2020 | 30 | 2020 |
| Influence of different pretreatments on Ti-6Al-4V surface integrity and scratch-resistance of epoxy coating: Analysis of topography, microstructure, chemistry and wettability R Melentiev, F Fang, SKR Narala Surface and Coatings Technology 404, 126436, 2020 | 27 | 2020 |
| Bibliometric analysis of micro-nano manufacturing technologies M Bodnariuk, R Melentiev Nanotechnology and Precision Engineering 2 (2), 61-70, 2019 | 26 | 2019 |
| Diamond drilling of carbon fiber reinforced polymers: influence of tool grit size and process parameters on workpiece delamination PC Priarone, M Robiglio, R Melentiev, L Settineri Procedia CIRP 66, 181-186, 2017 | 26 | 2017 |
| Tailoring of surface topography for tribological purposes by controlled solid particle impacts R Melentiev, F Fang Wear 444, 203164, 2020 | 23 | 2020 |
| Investigation of erosion temperature in micro-blasting R Melentiev, F Fang Wear 420, 123-132, 2019 | 20 | 2019 |
| Study on tribological performance of groove-textured bioimplants G Shen, J Zhang, R Melentiev, F Fang journal of the mechanical behavior of biomedical materials 119, 104514, 2021 | 18 | 2021 |
| Identifying adhesion characteristics of metal-polymer interfaces: Recent advances in the case of electroplated acrylonitrile butadiene styrene A Yudhanto, X Li, R Tao, R Melentiev, G Lubineau Materials Today Communications, 106218, 2023 | 12 | 2023 |
| Greener electrochemical plating of ABS polymer with unprecedented adhesion via hierarchical micro–nanotexturing R Melentiev, R Tao, G Lubineau Journal of Materials Research and Technology 24, 3575-3587, 2023 | 12 | 2023 |
| Large-scale hot embossing of 1 µm high-aspect-ratio textures on ABS polymer R Melentiev, G Lubineau CIRP Journal of Manufacturing Science and Technology 38, 340-349, 2022 | 11 | 2022 |
| Effect of actual surface area on adhesion strength of copper electroplated on ABS plastic micro-textured by hot embossing R Melentiev, R Tao, L Fatta, AK Tevtia, G Lubineau Procedia CIRP 108, 210-215, 2022 | 10 | 2022 |
| Mapping the coating failure modes of electroless plated metal on ABS polymer with micro-nano structured interface R Melentiev, R Tao, X Li, AK Tevtia, N Verghese, G Lubineau International Journal of Adhesion and Adhesives 126, 103471, 2023 | 9 | 2023 |
| Contributions of chemical interactions and mechanical interlocking for the adhesion of electroplated copper to ABS in the Cr (VI) etching process R Tao, L Fatta, R Melentiev, AK Tevtia, G Lubineau International Journal of Adhesion and Adhesives 126, 103450, 2023 | 9 | 2023 |
| Towards decoupling chemical and mechanical adhesion at the electroplated metal/polymer interface via precision surface texturing R Melentiev, R Tao, L Fatta, AK Tevtia, N Verghese, G Lubineau Surfaces and Interfaces 38, 102875, 2023 | 9 | 2023 |
Fengzhou FangTJU and UCD在 tju.edu.cn 的电子邮件经过验证
