关注
Sitarama Raju Kada
Sitarama Raju Kada
Institute for Frontier Materials, Deakin University, 75 Pigdons Road, Waurn Ponds, Victoria 3216
在 deakin.edu.au 的电子邮件经过验证
标题
引用次数
引用次数
年份
High strength and ductile ultrafine-grained Cu–Ag alloy through bimodal grain size, dislocation density and solute distribution
K. Sitarama Raju, V. Subramanya Sarma, A. Kauffmann, Z. Hegedűs, J. Gubicza ...
Acta Materialia 61 (1), 228-238, 2013
1302013
On the enhanced wear resistance of CoCrFeMnNi high entropy alloy at intermediate temperature
J Joseph, N Haghdadi, M Annasamy, S Kada, PD Hodgson, MR Barnett, ...
Scripta Materialia 186, 230-235, 2020
1112020
In-situ X-ray diffraction studies of slip and twinning in the presence of precipitates in AZ91 alloy
SR Kada, PA Lynch, JA Kimpton, MR Barnett
Acta Materialia 119, 145-156, 2016
842016
Grain size and grain boundary character distribution in ultra-fine grained (ECAP) nickel
K. Sitarama Raju, M. Ghanashyam Krishna, K. A. Padmanabhan, K. Muraleedharan ...
Materials Science and Engineering: A 491 (1-2), 1-7, 2008
672008
Microstructure and mechanical properties of nanocrystalline high strength Al–Mg–Si (AA6061) alloy by high energy ball milling and spark plasma sintering
JK Rana, D Sivaprahasam, K Seetharama Raju, V Subramanya Sarma
Materials Science and Engineering: A 527 (1-2), 292-296, 2009
512009
Optimising the Al and Ti compositional window for the design of γ’(L12)-strengthened Al–Co–Cr–Fe–Ni–Ti high entropy alloys
J Joseph, M Annasamy, SR Kada, PD Hodgson, MR Barnett, ...
Materials Science and Engineering: A 835, 142620, 2022
402022
Influence of precipitation on yield elongation in Mg-Zn alloys
J Wang, MRG Ferdowsi, SR Kada, CR Hutchinson, MR Barnett
Scripta Materialia 160, 5-8, 2019
392019
A scrap-tolerant alloying concept based on high entropy alloys
MR Barnett, M Senadeera, D Fabijanic, KF Shamlaye, J Joseph, SR Kada, ...
Acta Materialia 200, 735-744, 2020
322020
The ageing response of direct laser deposited metastable β-Ti alloy, Ti–5Al–5Mo–5V–3Cr
D Sharma, SR Kada, D Fabijanic, D Parfitt, B Chen, B Roebuck, ...
Additive Manufacturing 48, 102384, 2021
262021
Use of Mg–Al nanoclay as an efficient vehicle for the delivery of the herbicide 2, 4-dichlorophenoxyacetic acid
PP Nadiminti, H Sharma, SR Kada, FM Pfeffer, LA O’Dell, DM Cahill
ACS Sustainable Chemistry & Engineering 7 (12), 10962-10970, 2019
252019
Appearance of textures with a c-axis parallel to the extrusion direction in Mg alloys
J Wang, MRG Ferdowsi, SR Kada, S Babaniaris, B Hutchinson, PA Lynch, ...
Scripta Materialia 210, 114422, 2022
222022
Influence of cooling rate on the precipitation kinetics of nanoscale isothermal ω-phase in metastable β-Ti alloy, Ti–5Al–5Mo–5V–3Cr
D Sharma, D Parfitt, B Chen, B Roebuck, DA Venero, SR Kada, ...
Journal of Alloys and Compounds 859, 157822, 2021
222021
Development of a laboratory-based transmission diffraction technique for in situ deformation studies of Mg alloys
Kada Sitarama Raju, P. A Lynch, M. R. Barnett
Journal of Applied Crystallography 48 (2), 365-376, 2015
202015
Dislocation structures representing individual slip systems within the α phase of a Ti–6Al–4V alloy deformed in tension
P Cizek, SR Kada, J Wang, N Armstrong, RA Antoniou, PA Lynch
Materials Science and Engineering: A 797, 140225, 2020
192020
Influence of precipitation on tension and compression twinning in Mg-6.5 Zn alloy
J Wang, MRG Ferdowsi, PA Lynch, SR Kada, MR Barnett
Scripta Materialia 207, 114253, 2022
182022
Microstructure evolution and hardness variation during annealing of equal channel angular pressed ultra-fine grained nickel subjected to 12 passes
K. Sitarama Raju, M. Ghanashyam Krishna, K. A. Padmanabhan, V. Subramanya ...
Journal of Materials Science 46 (8), 2662-2671, 2011
182011
Stress relaxations during cyclic loading-unloading in precipitation hardened Mg-4.5 Zn
J Wang, MRG Ferdowsi, SR Kada, PA Lynch, Z Wang, JA Kimpton, ...
Acta Materialia 205, 116531, 2021
172021
Crystal plasticity and in-situ diffraction-based determination of the dislocation strengthening and load-sharing effects of precipitates in Mg alloy, AZ91
JJ Bhattacharyya, SR Kada, MR Barnett, SR Agnew
Materialia 6, 100308, 2019
162019
Deformation of magnesium alloys during laboratory scale in-situ x-ray diffraction
Kada Sitarama Raju
Deakin University, 2013
132013
Effect of manganese on the grain boundary network of lath martensite in precipitation hardenable stainless steels
V Govindaraj, E Farabi, S Kada, PD Hodgson, RP Singh, GS Rohrer, ...
Journal of Alloys and Compounds 886, 161333, 2021
122021
系统目前无法执行此操作,请稍后再试。
文章 1–20