| 3D bioprinting of low-concentration cell-laden gelatin methacrylate (GelMA) bioinks with a two-step cross-linking strategy J Yin, M Yan, Y Wang, J Fu, H Suo ACS applied materials & interfaces 10 (8), 6849-6857, 2018 | 526 | 2018 |
| Wearable thermoelectric generator to harvest body heat for powering a miniaturized accelerometer Y Wang, Y Shi, D Mei, Z Chen Applied energy 215, 690-698, 2018 | 248 | 2018 |
| Flexible capacitive tactile sensor array with truncated pyramids as dielectric layer for three-axis force measurement G Liang, Y Wang, D Mei, K Xi, Z Chen Journal of Microelectromechanical systems 24 (5), 1510-1519, 2015 | 181 | 2015 |
| Flexible tactile sensor array for distributed tactile sensing and slip detection in robotic hand grasping Y Wang, X Wu, D Mei, L Zhu, J Chen Sensors and Actuators A: Physical 297, 111512, 2019 | 102 | 2019 |
| Design and fabrication of wearable thermoelectric generator device for heat harvesting Y Shi, Y Wang, D Mei, B Feng, Z Chen IEEE Robotics and Automation Letters 3 (1), 373-378, 2017 | 98 | 2017 |
| 4D printed cardiac construct with aligned myofibers and adjustable curvature for myocardial regeneration Y Wang, H Cui, Y Wang, C Xu, TJ Esworthy, SY Hann, M Boehm, YL Shen, ... ACS applied materials & interfaces 13 (11), 12746-12758, 2021 | 96 | 2021 |
| Emerging 4D printing strategies for next‐generation tissue regeneration and medical devices Y Wang, H Cui, T Esworthy, D Mei, Y Wang, LG Zhang Advanced Materials 34 (20), 2109198, 2022 | 95 | 2022 |
| Projection-based 3D printing of cell patterning scaffolds with multiscale channels D Xue, Y Wang, J Zhang, D Mei, Y Wang, S Chen ACS applied materials & interfaces 10 (23), 19428-19435, 2018 | 92 | 2018 |
| Wearable thermoelectric generator for harvesting heat on the curved human wrist Y Wang, Y Shi, D Mei, Z Chen Applied energy 205, 710-719, 2017 | 76 | 2017 |
| Silicone-Based Tissue-Mimicking Phantom for Needle Insertion Simulation Y Wang, BL Tai, H Yu, AJ Shih Journal of Medical Devices 8 (2), 021001-7, 2014 | 75 | 2014 |
| Wearable thermoelectric generator with copper foam as the heat sink for body heat harvesting Y Shi, Y Wang, D Mei, Z Chen Ieee Access 6, 43602-43611, 2018 | 63 | 2018 |
| Liquid metal-based wearable tactile sensor for both temperature and contact force sensing Y Wang, Y Lu, D Mei, L Zhu IEEE Sensors Journal 21 (2), 1694-1703, 2020 | 60 | 2020 |
| Highly sensitive and flexible tactile sensor based on porous graphene sponges for distributed tactile sensing in monitoring human motions L Zhu, Y Wang, D Mei, X Wu Journal of Microelectromechanical Systems 28 (1), 154-163, 2018 | 59 | 2018 |
| Digital light processing-based 3D printing of cell-seeding hydrogel scaffolds with regionally varied stiffness D Xue, J Zhang, Y Wang, D Mei ACS Biomaterials Science & Engineering 5 (9), 4825-4833, 2019 | 55 | 2019 |
| Highly sensitive and flexible tactile sensor with truncated pyramid-shaped porous graphene/silicone rubber composites for human motion detection Y Wang, Z Chen, D Mei, L Zhu, S Wang, X Fu Composites Science and Technology 217, 109078, 2022 | 53 | 2022 |
| The Needle with Lancet Point – Geometry for Tip Grinding and Tissue Insertion Force AJS Yancheng Wang, Mackenzie van Loon, Christopher Spangler, Bruce L-J Tai ... Proceedings of the seventh international conference on micromanufacturing …, 2012 | 51* | 2012 |
| Fully elastomeric fingerprint-shaped electronic skin based on tunable patterned graphene/silver nanocomposites L Zhu, Y Wang, D Mei, W Ding, C Jiang, Y Lu ACS applied materials & interfaces 12 (28), 31725-31737, 2020 | 49 | 2020 |
| Ni barrier in Bi2Te3-based thermoelectric modules for reduced contact resistance and enhanced power generation properties L Chen, D Mei, Y Wang, Y Li Journal of Alloys and Compounds 796, 314-320, 2019 | 49 | 2019 |
| Nominal power density analysis of thermoelectric pins with non-constant cross sections ZC Yaoguang Shi, Deqing Mei, Zhehe Yao, Yancheng Wang, Haiyan Liu Energy Conversion and Management 97, 1-6, 2015 | 49 | 2015 |
| Optimal needle design for minimal insertion force and bevel length Y Wang, RK Chen, BL Tai, PW McLaughlin, AJ Shih Medical Engineering & Physics 36 (9), 1093-1100, 2014 | 49 | 2014 |
