| Effects of cutting temperature and process optimization in drilling of GFRP composites AT Erturk, F Vatansever, E Yarar, EA Guven, T Sinmazcelik Journal of Composite Materials 55 (2), 235-249, 2021 | 53 | 2021 |
| Machining behavior of multiple layer polymer composite bearing with using different drill bits AT Erturk, F Vatansever, E Yarar, S Karabay Composites Part B: Engineering 176, 107318, 2019 | 45 | 2019 |
| Influence of forging and heat treatment on wear properties of Al–Si and Al–Pb bearing alloys in oil lubricated conditions E FEYZULLAHOĞLU, AT ERTÜRK, EA GÜVEN Transactions of Nonferrous Metals Society of China 23 (12), 3575-3583, 2013 | 33 | 2013 |
| Enhancement on Al–Mg–Si alloys against failure due to lightning arc occurred in energy transmission lines S Karabay, EA Güven, AT Ertürk Engineering Failure Analysis 31, 153-160, 2013 | 32 | 2013 |
| Failure analysis of wire-breaks in aluminum conductor production and investigation of early failure reasons for transmission lines S Karabay, AT Ertürk, M Zeren, R Yamanoğlu, E Karakulak Engineering Failure Analysis 83, 47-56, 2018 | 29 | 2018 |
| Investigation of the Microstructure and Mechanical Characteristics of Lattice Structures Produced by Laser Powder Bed Fusion Method AT Erturk, M Bulduk, G Tarakçi, G Özer, E Yarar Metals and Materials International 28, 155-167, 2022 | 26 | 2022 |
| A comparative study of mechanical and machining performance of polymer hybrid and carbon fiber epoxy composite materials AT Erturk, E Yarar, F Vatansever, AE Sahin, M Kilinçel, YO Alpay Polymers and Polymer Composites 29 (9), S655-S666, 2021 | 15 | 2021 |
| Tribological behavior of SiC particulate reinforced AA5754 matrix composite under dry and lubricated conditions AT Ertürk, M Şahin, M Aras Transactions of the Indian Institute of Metals 70, 1233-1240, 2017 | 14 | 2017 |
| Production of aluminum glass fiber reinforced foam synthesized by space-holder technique A Ertürk Acta Physica Polonica A 129 (4), 592-595, 2016 | 13 | 2016 |
| Dynamic Finite Element Analysis on Single Impact Plastic Deformation Behavior Induced by SMAT Process in 7075-T6 Aluminum Alloy E Yarar, AT Erturk, S Karabay Metals and Materials International 27 (8), 2600-2613, 2021 | 12 | 2021 |
| Improving mechanical properties of AlSi10Mg aluminum alloy using ultrasonic melt treatment combined with T6 heat treatment F Vatansever, AT Erturk, S Karabay Kov. Mater 57, 33-43, 2019 | 10 | 2019 |
| Manufacturing of Al-Zr Thermal-resistant Alloys for Transmission Lines A Erturk, E Guven, S Karabay Acta Physica Polonica A 127 (4), 1292-1294, 2015 | 10 | 2015 |
| Metal foams as a gas diffusion layer in direct borohydride fuel cells AT Ertürk, U Ergin, T Kadıoglu, AC Türkmen, C Çelik International Journal of Hydrogen Energy 47 (55), 23373-23380, 2022 | 9 | 2022 |
| Alüminyum-Silisyum Alaşımlarının Mikroyapısal ve Mekanik Özelliklerinin T6 Isıl İşlemi ile İyileştirilmesi (Improvement of Microstructural and Mechanical Properties of Aluminum … F VATANSEVER, AT ERTÜRK, S KARABAY Dokuz Eylül Üniversitesi Mühendislik Fakültesi Fen ve Mühendislik Dergisi 20 …, 2018 | 9 | 2018 |
| Comparative Analysis in Drilling Performance of AA7075 in Different Temper Conditions E YARAR, AT ERTURK, FG KOÇ, F VATANSEVER Journal of Materials Engineering and Performance, https://doi.org/10.1007 …, 2023 | 8 | 2023 |
| Effect of ultrasonic melt treatment on the tribological behavior of 7075 aluminum alloy F Vatansever, AT Erturk, E Feyzullahoglu Materials Testing 62 (12), 1243–1250, 2020 | 8 | 2020 |
| Effects of different heat treatments on microstructure, toughness and wear behavior of GX 10CrNiMoNb 18-10 cast austenitic stainless steel M Türker, AT Ertürk, E Karakulak, EA Güven Transactions of the Indian Institute of Metals 71, 1033-1040, 2018 | 8 | 2018 |
| Vibration noise harshness of a light truck driveshaft, analysis and improvement with six sigma approach A Ertürk, S Karabay, K Baynal, T Korkut Acta Physica Polonica A 131 (3), 477-480, 2017 | 8 | 2017 |
| Performance testing of an optical ground wire composite S Karabay, EA Güven, AT Ertürk Materials and Technol 47 (1), 119-124, 2013 | 6 | 2013 |
| Sürtünme karıştırma kaynağı ile birleştirilen polietilen levhalarda kaynak bölgesi özelliklerinin belirlenmesi, 8 AA Arıcı, AT Ertürk Uluslararası Kırılma Konferansı Bidiri Kitabı, İstanbul, 490-497, 2007 | 6 | 2007 |
Eser YARARKocaeli University在 kocaeli.edu.tr 的电子邮件经过验证
