| Preparation of structured catalysts with Ni and Ni–Rh/CeO2 catalytic layers for syngas production by biogas reforming processes C Italiano, R Balzarotti, A Vita, S Latorrata, C Fabiano, L Pino, C Cristiani Catalysis Today 273, 3-11, 2016 | 73 | 2016 |
| Investigation of packed conductive foams as a novel reactor configuration for methane steam reforming R Balzarotti, M Ambrosetti, A Beretta, G Groppi, E Tronconi Chemical Engineering Journal 391, 123494, 2020 | 67 | 2020 |
| Design of properties and performances of innovative gas diffusion media for polymer electrolyte membrane fuel cells S Latorrata, R Balzarotti, PG Stampino, C Cristiani, G Dotelli, M Guilizzoni Progress in Organic Coatings 78, 517-525, 2015 | 35 | 2015 |
| Combined dip-coating/spin-coating depositions on ceramic honeycomb monoliths for structured catalysts preparation R Balzarotti, C Cristiani, LF Francis Catalysis Today 334, 90-95, 2019 | 34 | 2019 |
| Spin coating deposition on complex geometry substrates: Influence of operative parameters R Balzarotti, C Cristiani, LF Francis Surface and coatings technology 330, 1-9, 2017 | 33 | 2017 |
| H2 production by methane steam reforming over Rh/Al2O3 catalyst packed in Cu foams: a strategy for the kinetic investigation in concentrated conditions M Ambrosetti, D Bonincontro, R Balzarotti, A Beretta, G Groppi, E Tronconi Catalysis Today 387, 107-118, 2022 | 32 | 2022 |
| Ni/CeO2-thin ceramic layer depositions on ceramic monoliths for syngas production by Oxy Steam Reforming of biogas R Balzarotti, C Italiano, L Pino, C Cristiani, A Vita Fuel Processing Technology 149, 40-48, 2016 | 32 | 2016 |
| A comparison between washcoated and packed copper foams for the intensification of methane steam reforming R Balzarotti, A Beretta, G Groppi, E Tronconi Reaction Chemistry & Engineering 4 (8), 1387-1392, 2019 | 31 | 2019 |
| Washcoating of low surface area cerium oxide on complex geometry substrates R Balzarotti, C Cristiani, S Latorrata, A Migliavacca Particulate Science and Technology 34 (2), 184-193, 2016 | 26 | 2016 |
| The influence of the washcoat deposition process on high pore density open cell foams activation for CO catalytic combustion M Ambrosetti, R Balzarotti, C Cristiani, G Groppi, E Tronconi Catalysts 8 (11), 510, 2018 | 25 | 2018 |
| Periodic open cellular structures (POCS) as enhanced catalyst supports: Optimization of the coating procedure and analysis of mass transport R Balzarotti, M Ambrosetti, M Arnesano, A Anglani, G Groppi, E Tronconi Applied Catalysis B: Environmental 283, 119651, 2021 | 20 | 2021 |
| Washcoat Deposition of Ni- and Co-ZrO2 Low Surface Area Powders onto Ceramic Open-Cell Foams: Influence of Slurry Formulation and Rheology R Balzarotti, M Ciurlia, C Cristiani, F Paparella Catalysts 5 (4), 2271-2286, 2015 | 20 | 2015 |
| Rich H2 catalytic oxidation as a novel methodology for the evaluation of mass transport properties of 3D printed catalyst supports FS Franchi, M Ambrosetti, R Balzarotti, M Bracconi, G Groppi, E Tronconi Catalysis Today 383, 123-132, 2022 | 19 | 2022 |
| The role of fluorinated polymers in the water management of proton exchange membrane fuel cells: A review M Mariani, A Basso Peressut, S Latorrata, R Balzarotti, M Sansotera, ... Energies 14 (24), 8387, 2021 | 19 | 2021 |
| Development and characterization of non-conventional micro-porous layers for PEM fuel cells R Balzarotti, S Latorrata, P Gallo Stampino, C Cristiani, G Dotelli Energies 8 (7), 7070-7083, 2015 | 18 | 2015 |
| Wastewater treatment using alkali-activated-based sorbents produced from blast furnace slag S Latorrata, R Balzarotti, MI Adami, B Marino, S Mostoni, R Scotti, ... Applied Sciences 11 (7), 2985, 2021 | 13 | 2021 |
| Optimization of perfluoropolyether-based gas diffusion media preparation for PEM fuel cells R Balzarotti, S Latorrata, M Mariani, P Gallo Stampino, G Dotelli Energies 13 (7), 1831, 2020 | 12 | 2020 |
| Effect of different hydrophobic agents onto the surface of gas diffusion layers for PEM-FC P GALLO STAMPINO, R Balzarotti, C Cristiani, G Dotelli, MG Guilizzoni, ... Chemical Engineering Transactions vol. 32 (2013), 1603-1608, 2013 | 12 | 2013 |
| Production and characterization of copper periodic open cellular structures made by 3D printing‐replica technique R Balzarotti, A Bisaccia, MC Tripi, M Ambrosetti, G Groppi, E Tronconi Journal of advanced manufacturing and processing 2 (4), e10068, 2020 | 11 | 2020 |
| Recent advances in the development of highly conductive structured supports for the intensification of non-adiabatic gas-solid catalytic processes: the methane steam reforming … R Balzarotti, M Ambrosetti, A Beretta, G Groppi, E Tronconi Frontiers in Chemical Engineering 3, 811439, 2022 | 10 | 2022 |
