| Experimental and statistical analysis of low velocity impact response of filament wound composite pipes L Gemi, M Kayrıcı, M Uludağ, DS Gemi, ÖS Şahin Composites Part B: Engineering 149, 38-48, 2018 | 108 | 2018 |
| On the interpretation of melt quality assessment of A356 aluminum alloy by the reduced pressure test: the bifilm index and its physical meaning M Uludağ, R Cetin, D Dişpinar, M Tiryakioğlu International Journal of Metalcasting 12, 853-860, 2018 | 50 | 2018 |
| Characterization of the effect of melt treatments on melt quality in Al-7wt% Si-Mg alloys M Uludağ, R Çetin, D Dispinar, M Tiryakioğlu Metals 7 (5), 157, 2017 | 48 | 2017 |
| Evaluation of the effects of rotary degassing process variables on the quality of A357 aluminum alloy castings M Mostafaei, M Ghobadi, G Eisaabadi B, M Uludağ, M Tiryakioğlu Metallurgical and Materials Transactions B 47, 3469-3475, 2016 | 41 | 2016 |
| The effect of 0.5 wt% additions of carbon nanotubes and ceramic nanoparticles on tensile properties of epoxy-matrix composites: a comparative study L Gemi, S Yazman, M Uludağ, D Dispinar, M Tiryakioğlu Mater. Sci Nanotechnol, 2017 | 40 | 2017 |
| The effects of degassing, grain refinement & Sr-addition on melt quality-hot tear sensitivity relationships in cast A380 aluminum alloy M Uludağ, R Cetin, D Dispinar, M Tiryakioğlu Engineering Failure Analysis 90, 90-102, 2018 | 38 | 2018 |
| Freezing range, melt quality, and hot tearing in Al-Si alloys M Uludağ, R Cetin, D Dispinar Metallurgical and Materials Transactions A 49, 1948-1961, 2018 | 30 | 2018 |
| Relationship between machinability, microstructure, and mechanical properties of Al-7Si alloy M Uludağ, Ş Yazman, L Gemi, B Bakircioğlu, E Erzi, D Dispinar Journal of Testing and Evaluation 46 (6), 2592-2603, 2018 | 21 | 2018 |
| Change in porosity of A356 by holding time and its effect on mechanical properties M Uludağ, R Cetin, L Gemi, D Dispinar Journal of Materials Engineering and Performance 27, 5141-5151, 2018 | 17 | 2018 |
| Effect of degassing and grain refinement on hot tearing tendency in Al8Si3Cu alloy M Uludağ, R Cetin, D Dispinar, M Tiryakioğlu International Journal of Metalcasting 12, 589-595, 2018 | 16 | 2018 |
| Correlation between machinability and chip morphology of Austempered ductile iron Ş Yazman, L Gemı, M Uludağ, A Akdemır, M Uyaner, D Dişpinar Journal of Testing and Evaluation 46 (3), 1012-1021, 2018 | 16 | 2018 |
| Assessment of mechanism of pore formation in directionally solidified A356 alloy M Uludag, D Dispinar Archives of Foundry Engineering 17 (1), 157-162, 2017 | 16 | 2017 |
| Effect of Sr and Ti addition on the corrosion behaviour of Al-7Si-0.3 Mg alloy M Uludag, M Kocabaş, D Dışpınar, R Çetin, N CANSEVER Archives of Foundry Engineering 17 (2), 2017 | 11 | 2017 |
| The effect of Sr modification and holding time on Si morphology and mechanical properties of ETIAL 195 alloy M Uludağ, L Gemi, MR Eryılmaz, D Dışpınar Pamukkale Üniversitesi Mühendislik Bilimleri Dergisi 21 (8), 348-351, 2015 | 8* | 2015 |
| Effect of Ti addition holding time on casting quality and mechanical properties of A356 alloy M Gurtaran, M Uludağ SN Applied Sciences 2 (11), 1833, 2020 | 7 | 2020 |
| Influence of Al-B grain refiner on porosity formation of directionally solidified Al-Si alloys M Uludağ China Foundry 17 (5), 372-377, 2020 | 7 | 2020 |
| Mechanical properties and melt quality relationship of Sr-modified Al-12Si alloy M Uludağ, M Uyaner, F Yilmaz, D Dişpinar Archives of Foundry Engineering 15, 2015 | 7 | 2015 |
| Farklı şartlarda dökülmüş modifiyeli Al-12Si alaşımlarında yapı ve özellikler M Uludağ Selçuk Üniversitesi Fen Bilimleri Enstitüsü, 2011 | 7 | 2011 |
| The effect of bifilm and Sr modification on the mechanical properties of AlSi12Fe alloy M Uludağ, M Gurtaran, D Dispinar Archives of Foundry Engineering 20, 2020 | 6 | 2020 |
| The effect of holding time and solidification rate on porosity of A356 M Uludağ, L Gemi, R Çetin, D Dispinar American Journal of Engineering Research (AJER) 5 (12), 271-275, 2016 | 6 | 2016 |
