关注
Srinivas Aditya Mantri
标题
引用次数
引用次数
年份
Optimizing the coupled effects of Hall-Petch and precipitation strengthening in a Al0. 3CoCrFeNi high entropy alloy
B Gwalani, V Soni, M Lee, SA Mantri, Y Ren, R Banerjee
Materials & Design 121, 254-260, 2017
3452017
Additive Manufacturing of Magnetic Materials
V Chaudhary, SA Mantri, RV Ramanujan, R Banerjee
Progress in Materials Science, 100688, 2020
1952020
Enhancing strength and strain hardenability via deformation twinning in fcc-based high entropy alloys reinforced with intermetallic compounds
D Choudhuri, B Gwalani, S Gorsse, M Komarasamy, SA Mantri, ...
Acta Materialia 165, 420-430, 2019
1622019
Tuning the scale of α precipitates in β-titanium alloys for achieving high strength
SA Mantri, D Choudhuri, T Alam, GB Viswanathan, JM Sosa, HL Fraser, ...
Scripta Materialia 154, 139-144, 2018
1512018
Strengthening strategy for a ductile metastable β-titanium alloy using low-temperature aging
F Sun, JY Zhang, P Vermaut, D Choudhuri, T Alam, SA Mantri, P Svec, ...
Materials Research Letters 5 (8), 547-553, 2017
1222017
Formation of a Huesler-like L21 phase in a CoCrCuFeNiAlTi high-entropy alloy
D Choudhuri, T Alam, T Borkar, B Gwalani, AS Mantri, SG Srinivasan, ...
Scripta Materialia 100, 36-39, 2015
1222015
On the heterogeneous nature of deformation in a strain-transformable beta metastable Ti-V-Cr-Al alloy
L Lilensten, Y Danard, C Brozek, S Mantri, P Castany, T Gloriant, ...
Acta Materialia 162, 268-276, 2019
1062019
Additive manufacturing of functionally graded Co–Fe and Ni–Fe magnetic materials
V Chaudhary, NMSKK Yadav, SA Mantri, S Dasari, A Jagetia, ...
Journal of Alloys and Compounds 823, 153817, 2020
962020
Laser additive processing of a functionally graded internal fracture fixation plate
DD Lima, SA Mantri, CV Mikler, R Contieri, CJ Yannetta, KN Campo, ...
Materials & Design 130, 8-15, 2017
832017
Laser additive manufacturing of compositionally graded AlCrFeMoVx (x= 0 to 1) high-entropy alloy system
B Gwalani, V Soni, OA Waseem, SA Mantri, R Banerjee
Optics & Laser Technology 113, 330-337, 2019
772019
Change in the deformation mode resulting from beta-omega compositional partitioning in a TiMo alloy: Room versus elevated temperature
SA Mantri, D Choudhuri, T Alam, V Ageh, F Sun, F Prima, R Banerjee
Scripta Materialia 130, 69-73, 2017
732017
The effect of boron on the grain size and texture in additively manufactured β-Ti alloys
SA Mantri, T Alam, D Choudhuri, CJ Yannetta, CV Mikler, PC Collins, ...
Journal of Materials Science, 1-12, 2017
622017
Enhanced tensile yield strength in laser additively manufactured Al0. 3CoCrFeNi high entropy alloy
MSKKY Nartu, T Alam, S Dasari, SA Mantri, S Gorsse, H Siller, N Dahotre, ...
Materialia 9, 100522, 2020
602020
In situ reactions during direct laser deposition of Ti-B4C composites
MSKKY Nartu, SA Mantri, MV Pantawane, YH Ho, B McWilliams, K Cho, ...
Scripta Materialia 183, 28-32, 2020
562020
A closer look at the in vitro electrochemical characterisation of titanium alloys for biomedical applications using in-situ methods
JL Wang, RL Liu, T Majumdar, SA Mantri, VA Ravi, R Banerjee, N Birbilis
Acta biomaterialia 54, 469-478, 2017
552017
Influence of fine-scale alpha precipitation on the mechanical properties of the beta titanium alloy beta-21S
SA Mantri, D Choudhuri, A Behera, JD Cotton, N Kumar, R Banerjee
Metallurgical and Materials Transactions A 46, 2803-2808, 2015
522015
Effect of micro-segregation of alloying elements on the precipitation behaviour in laser surface engineered Alloy 718
SA Mantri, S Dasari, A Sharma, T Alam, MV Pantawane, M Pole, ...
Acta Materialia 210, 116844, 2021
502021
Deformation induced hierarchical twinning coupled with omega transformation in a metastable β-Ti alloy
SA Mantri, F Sun, D Choudhuri, T Alam, B Gwalani, F Prima, R Banerjee
Scientific reports 9 (1), 1334, 2019
492019
Magnetic and mechanical properties of an additively manufactured equiatomic CoFeNi complex concentrated alloy
M Nartu, A Jagetia, V Chaudhary, SA Mantri, E Ivanov, NB Dahotre, ...
Scripta Materialia 187, 30-36, 2020
482020
Microstructure and micro-texture evolution of additively manufactured β-Ti alloys
SA Mantri, R Banerjee
Additive Manufacturing 23, 86-98, 2018
452018
系统目前无法执行此操作,请稍后再试。
文章 1–20