| Influence of coating material and cutting parameters on surface roughness and material removal rate in turning process using Taguchi method C Moganapriya, R Rajasekar, K Ponappa, R Venkatesh, S Jerome Materials Today: Proceedings 5 (2), 8532-8538, 2018 | 51 | 2018 |
| Tribomechanical behavior of TiCN/TiAlN/WC-C multilayer film on cutting tool inserts for machining C Moganapriya, R Rajasekar, K Ponappa, R Karthick, RV Perundurai, ... Materials Testing 59 (7-8), 703-707, 2017 | 16 | 2017 |
| Experimental investigation of mechanical properties on CF reinforced PLA, ABS and Nylon composite part R Venkatesh, JJJ Britto, K Amudhan, V Anbumalar, R Prabhakaran, ... Materials Today: Proceedings 76, 647-653, 2023 | 15 | 2023 |
| Influence of cutting fluid flow rate and cutting parameters on the surface roughness and flank wear of TiAlN coated tool in turning AISI 1015 steel using Taguchi method C Moganapriya, R Rajasekar, K Ponappa, R Venkatesh, R Karthick Archives of Metallurgy and Materials, 2017 | 13 | 2017 |
| Design optimization of biomedical stent under the influence of the radial pressure using FEM JJJ Britto, R Venkatesh, R Prabhakaran, K Amudhan Materials Today: Proceedings 39, 1332-1336, 2021 | 9 | 2021 |
| Detection of cracks in surfaces and materials using convolutional neural network R Venkatesh, K Vignesh Saravanan, VR Aswin, S Balaji, K Amudhan, ... Mobile Radio Communications and 5G Networks: Proceedings of Second MRCN 2021 …, 2022 | 3 | 2022 |
| Micromechanics study on FRP composite cylinder under finite element simulation COMSOL Multiphysics® JJJ Britto, R Venkatesh, K Amudhan, A Vasanthanathan, ... Materials Today: Proceedings 45, 804-810, 2021 | 3 | 2021 |
| Influence of glass fiber hybridization on flexural and water absorption behaviour of banana fiber reinforced epoxy composites R Karthick, V Anbumalar, M Vigneshkumar, MS Gemsprim, R Venkatesh, ... Materials Today: Proceedings, 2023 | 2 | 2023 |
| Experimental investigation on machinability of additive manufactured PLA and PETG polymers under dry turning process R Venkatesh, S Kathiravan, R Prabhakaran, M Ramar, ... Recent Advances in Materials Technologies: Select Proceedings of ICEMT 2021 …, 2022 | 2 | 2022 |
| Evaluation of Hardness, Surface Roughness, and Impact Strength of Additive Manufactured Ultraviolet Resin-Based Polymer R Venkatesh, R Prabhakaran, J Jerold John Britto, K Amudhan, ... Recent Advances in Materials Technologies: Select Proceedings of ICEMT 2021 …, 2022 | 1 | 2022 |
| Experimental Investigation and Identifying the Suitable Process Parameters for Additively Manufactured PETG Material by Fused Deposition Modeling R Prabhakaran, J Jerold John Britto, R Venkatesh, G Mukesh, ... Recent Advances in Materials Technologies: Select Proceedings of ICEMT 2021 …, 2022 | 1 | 2022 |
| Design and structural analysis of inbuilt car jack system R Venkatesh, V Karunakaran, AAS Raj, RD Kanna, HMS Rahman Materials Today: Proceedings 46, 9933-9937, 2021 | 1 | 2021 |
