关注
Kalliopi-Artemi Kalteremidou
Kalliopi-Artemi Kalteremidou
PhD, Vrije Universiteit Brussel
在 vub.be 的电子邮件经过验证
标题
引用次数
引用次数
年份
Exploration of specimen geometry and tab configuration for tensile testing exploiting the potential of 3D printing freeform shape continuous carbon fibre-reinforced nylon …
L Pyl, KA Kalteremidou, D Van Hemelrijck
Polymer Testing 71, 318-328, 2018
752018
Exploration of the design freedom of 3D printed continuous fibre-reinforced polymers in open-hole tensile strength tests
L Pyl, KA Kalteremidou, D Van Hemelrijck
Composites Science and Technology 171, 135-151, 2019
592019
Effect of multiaxiality, stacking sequence and number of off-axis layers on the mechanical response and damage sequence of carbon/epoxy composite laminates under static loading
KA Kalteremidou, M Hajikazemi, W Van Paepegem, D Van Hemelrijck, ...
Composites Science and Technology 190, 108044, 2020
262020
Multiaxial Damage Characterization of Carbon/Epoxy Angle-Ply Laminates under Static Tension by Combining In Situ Microscopy with Acoustic Emission
DVHLP Kalliopi-Artemi Kalteremidou, Brendan R. Murray, Eleni Tsangouri ...
Applied Sciences 8 (11), 2021, 2018
212018
On the use of acoustic emission to identify the dominant stress/strain component in carbon/epoxy composite materials
KA Kalteremidou, DG Aggelis, D Van Hemelrijck, L Pyl
Mechanics Research Communications 111, 103663, 2021
202021
Failure characterisation of CF/epoxy V-shape components using digital image correlation and acoustic emission analyses
BR Murray, KA Kalteremidou, D Carrella-Payan, A Cernescu, ...
Composite Structures 236, 111797, 2020
152020
Recent developments in acoustic emission for better performance of structural materials
N Ospitia, E Korda, KA Kalteremidou, G Lefever, E Tsangouri, DG Aggelis
Developments in the Built Environment 13, 100106, 2023
142023
Failure analysis of CF/epoxy hollow beam components using digital image correlation and acoustic emission analyses
KA Kalteremidou, BR Murray, D Carrella-Payan, A Cernescu, ...
Composite Structures 275, 114481, 2021
112021
Crack tip monitoring of mode I and mode II delamination in CF/Epoxies under static and dynamic loading conditions using digital image correlation
BR Murray, S Fonteyn, D Carrella-Payan, KA Kalteremidou, A Cernescu, ...
Proceedings 3 (8), 389, 2018
112018
The influence of cutting conditions and cutting tool geometry on the atomistic modeling of precision cutting
A Markopoulos, N Karkalos, K Kalteremidou, A Balafoutis, D Manolakos
Engineering Solid Mechanics 3 (3), 195-206, 2015
72015
Experimental evaluation of J-integral in elastic and elastic–plastic polymers by means of digital image correlation and higher-order eigenfields under mode-I
AS Kojouri, HK Rikaee, KA Kalteremidou, D Van Hemelrijck
Engineering Fracture Mechanics 291, 109534, 2023
52023
Molecular dynamics modelling of nanometric cutting
AP Markopoulos, KAL Kalteremidou
Key engineering materials 581, 298-303, 2014
52014
Temperature distribution determination of thermoplastic composites samples in bias extension tests using a digital twin
RH Abadi, J Karami, AS Kojouri, KA Kalteremidou, D Van Hemelrijck
20th European Conference on Composite Materials, 558-564, 2022
22022
INVESTIGATING THE EFFECTS OF DIFFERENT CRACK SHARPENING METHODS ON THE MODE I AND MODE II FRACTURE TESTS OF AN EPOXY RESIN
J Karami, AS Kojouri, J Fan, KA Kalteremidou, W Van Paepegem, ...
20th European Conference on Composite Materials, 1-8, 2022
12022
Acoustic emission for identification of the dominant stress component in polymer composites at early loads
KA Kalteremidou, DG Aggelis, D Van Hemelrijck, L Pyl
Presented at 1st International Electronic Conference on Applied Sciences 10, 30, 2020
12020
The combined use of millimetre wave imaging and acoustic emission for the damage investigation of glass fibre reinforced polymer composites
KA Kalteremidou, A Pourkazemi, Y El Idrissi, Y Morabet, G He, J Stiens, ...
Proceedings of the 12th European Conference on Non-Destructive Testing …, 2018
12018
Experimental investigation of the fatigue behaviour of off-axis CFRP laminates using Non Destructive Techniques
KA Kalteremidou, S Fonteyn, D Carrella-Payan, L Pyl, D Van Hemelrijck
Proceedings of the 21st International Conference on Composite Materials, Xi …, 2017
12017
SIMULATION OF NANO-SCALE CUTTING WITH MOLECULAR DYNAMICS
AP Markopoulos, KAL Kalteremidou, DE Manolakos
American Journal of Nanotechnology 5 (2), 17, 2014
12014
Experimental Study of Composite-to-Steel Adhesive Joints with Laser Treated Surfaces
K Kalteremidou, N Tsouvalis, N Otero, P Romero, I Coto, E Rodriguez
16th European Conference on Composite Materials, 2014
12014
An experimental and analytical study of mode I fracture and crack kinking in thick adhesive joints
AS Kojouri, J Karami, KA Kalteremidou, J Fan, A Sharma, ...
Composites Part B: Engineering 284, 111695, 2024
2024
系统目前无法执行此操作,请稍后再试。
文章 1–20