关注
Francisco Javier Salvador Rubio
Francisco Javier Salvador Rubio
其他姓名F.J. Salvador
Universitat Politècnica de València, CMT-Clean Mobility & Thermofluids
在 mot.upv.es 的电子邮件经过验证
标题
引用次数
引用次数
年份
The influence of cavitation on the internal flow and the spray characteristics in diesel injection nozzles
F Payri, V Bermúdez, R Payri, FJ Salvador
Fuel 83 (4-5), 419-431, 2004
5912004
Using spray momentum flux measurements to understand the influence of diesel nozzle geometry on spray characteristics
R Payri, JM García, FJ Salvador, J Gimeno
Fuel 84 (5), 551-561, 2005
5042005
Diesel nozzle geometry influence on spray liquid-phase fuel penetration in evaporative conditions
R Payri, FJ Salvador, J Gimeno, LD Zapata
Fuel 87 (7), 1165-1176, 2008
2572008
Development and validation of a theoretical model for diesel spray penetration
JM Desantes, R Payri, FJ Salvador, A Gil
Fuel 85 (7-8), 910-917, 2006
2512006
Influence of cavitation phenomenon on primary break-up and spray behavior at stationary conditions
JM Desantes, R Payri, FJ Salvador, J De la Morena
Fuel 89 (10), 3033-3041, 2010
1972010
Effects of nozzle geometry on direct injection diesel engine combustion process
R Payri, FJ Salvador, J Gimeno, J De la Morena
Applied thermal engineering 29 (10), 2051-2060, 2009
1862009
Study of cavitation phenomena based on a technique for visualizing bubbles in a liquid pressurized chamber
R Payri, FJ Salvador, J Gimeno, J De la Morena
International Journal of Heat and Fluid Flow 30 (4), 768-777, 2009
1822009
Study of the influence of the needle lift on the internal flow and cavitation phenomenon in diesel injector nozzles by CFD using RANS methods
FJ Salvador, J Martínez-López, M Caballer, C De Alfonso
Energy conversion and management 66, 246-256, 2013
1782013
A NEW METHODOLOGY FOR CORRECTING THE SIGNAL CUMULATIVE PHENOMENON ON INJECTION RATE MEASUREMENTS.
R Payri, FJ Salvador, J Gimeno, G Bracho
Experimental techniques 32 (1), 2008
1762008
The effect of temperature and pressure on thermodynamic properties of diesel and biodiesel fuels
R Payri, FJ Salvador, J Gimeno, G Bracho
Fuel 90 (3), 1172-1180, 2011
1522011
A contribution to the understanding of cavitation effects in Diesel injector nozzles through a combined experimental and computational investigation
F Payri, R Payri, FJ Salvador, J Martínez-López
Computers & Fluids 58, 88-101, 2012
1482012
Measurements of spray momentum for the study of cavitation in diesel injection nozzles
JM Desantes, R Payri, FJ Salvador, J Gimeno
SAE Technical Paper, 2003
1482003
Study of cavitation phenomenon using different fuels in a transparent nozzle by hydraulic characterization and visualization
R Payri, FJ Salvador, J Gimeno, O Venegas
Experimental Thermal and Fluid Science 44, 235-244, 2013
1192013
A study of the relation between nozzle geometry, internal flow and sprays characteristics in diesel fuel injection systems
R Payri, S Molina, FJ Salvador, J Gimeno
KSME International Journal 18 (7), 1222-1235, 2004
1142004
Validation of a code for modeling cavitation phenomena in Diesel injector nozzles
FJ Salvador, JV Romero, MD Roselló, J Martínez-López
Mathematical and Computer Modelling 52 (7-8), 1123-1132, 2010
1112010
ECN Spray G external spray visualization and spray collapse description through penetration and morphology analysis
R Payri, FJ Salvador, P Martí-Aldaraví, D Vaquerizo
Applied Thermal Engineering 112, 304-316, 2017
1102017
Using one-dimensional modeling to analyse the influence of the use of biodiesels on the dynamic behavior of solenoid-operated injectors in common rail systems: Detailed …
R Payri, FJ Salvador, P Martí-Aldaraví, J Martínez-López
Energy Conversion and Management 54 (1), 90-99, 2012
1072012
Diesel ignition delay and lift-off length through different methodologies using a multi-hole injector
R Payri, FJ Salvador, J Manin, A Viera
Applied Energy 162, 541-550, 2016
1022016
A numerical study of the influence of diesel nozzle geometry on the inner cavitating flow
R Payri, X Margot, FJ Salvador
SAE Technical Paper, 2002
1022002
A computational investigation on the influence of the use of elliptical orifices on the inner nozzle flow and cavitation development in diesel injector nozzles
S Molina, FJ Salvador, M Carreres, D Jaramillo
Energy conversion and management 79, 114-127, 2014
1002014
系统目前无法执行此操作,请稍后再试。
文章 1–20