| Low velocity impact behavior of interlayer hybrid composite laminates with carbon/glass/basalt fibres D Chen, Q Luo, M Meng, Q Li, G Sun Composites Part B: Engineering 176, 107191, 2019 | 166 | 2019 |
| Flexural performance and cost efficiency of carbon/basalt/glass hybrid FRP composite laminates D Chen, G Sun, M Meng, X Jin, Q Li Thin-Walled Structures 142, 516-531, 2019 | 119 | 2019 |
| Effects of hygrothermal stress on the failure of CFRP composites M Meng, MJ Rizvi, SM Grove, HR Le Composite Structures 133, 1024-1035, 2015 | 101 | 2015 |
| 3D FEA modelling of laminated composites in bending and their failure mechanisms M Meng, HR Le, MJ Rizvi, SM Grove Composite Structures 119, 693-708, 2015 | 85 | 2015 |
| Multi-scale modelling of moisture diffusion coupled with stress distribution in CFRP laminated composites M Meng, MJ Rizvi, HR Le, SM Grove Composite Structures 138, 295-304, 2016 | 67 | 2016 |
| Residual crashworthiness of CFRP structures with pre-impact damage–an experimental and numerical study D Chen, G Sun, M Meng, G Li, Q Li International Journal of Mechanical Sciences 149, 122-135, 2018 | 62 | 2018 |
| Moisture effects on the bending fatigue of laminated composites M Meng, H Le, S Grove, MJ Rizvi Composite Structures 154, 49-60, 2016 | 52 | 2016 |
| The effects of unequal compressive/tensile moduli of composites M Meng, HR Le, MJ Rizvi, SM Grove Composite Structures 126, 207-215, 2015 | 47 | 2015 |
| Monomer selection for in situ polymerization infusion manufacture of natural-fiber reinforced thermoplastic-matrix marine composites Y Qin, J Summerscales, J Graham-Jones, M Meng, R Pemberton Polymers 12 (12), 2928, 2020 | 31 | 2020 |
| Dynamic axial crushing behaviors of circular composite tubes with different reinforcing fibers and triggers D Chen, Y Liu, M Meng, B Li, X Sun, B Yang, S Xiao, T Wang International Journal of Mechanical Sciences 244, 108083, 2023 | 21 | 2023 |
| Mechanical properties and tribological behaviour of electroless Ni–P–Cu coatings on corrosion-resistant alloys under ultrahigh contact stress with sprayed nanoparticles M Meng, A Leech, H Le Tribology International 139, 59-66, 2019 | 20 | 2019 |
| Design of a flexible stethoscope sensor skin based on MEMS technology H Zhang, M Meng, X Shu, S Liu 2006 7th International Conference on Electronic Packaging Technology, 1-4, 2006 | 15 | 2006 |
| Modelling of the buckling of a diaphragm–spine structure for a wave energy converter KM Collins, M Meng, HR Le, D Greaves, NW Bellamy Materials & Design 119, 159-170, 2017 | 10 | 2017 |
| FEA modelling and environmental assessment of a thin-walled composite drive shaft J Searle, M Meng, J Summerscales Thin-Walled Structures 180, 109799, 2022 | 6 | 2022 |
| Marine environmental effects on a graphene reinforced epoxy adhered single lap joint between metals and CFRP R Fry-Taylor, M Meng, X Wang International Journal of Adhesion and Adhesives 125, 103423, 2023 | 5 | 2023 |
| Investigation of residual stress effect during the anodic bonding process with different bondable materials for wafer level packaging design X Hu, M Meng, M Baeuscher, U Hansen, S Maus, O Gyenge, ... 2016 IEEE 18th Electronics Packaging Technology Conference (EPTC), 325-330, 2016 | 4 | 2016 |
| Interfacial response of fibre-to-matrix in textile reinforced concrete between two cracks: Analytical solution S Cheng, J Ji, M Meng Composite Structures 245, 112380, 2020 | 3 | 2020 |
| Intelligent textiles based on MEMS technology M Meng, Y Xu, H Zhang, S Liu 2007 Proceedings 57th Electronic Components and Technology Conference, 2030-2034, 2007 | 3 | 2007 |
| Flexible Responsive Systems in Wave Energy: FlexWave D Greaves, M Hann, Z You, J Chaplin, S Cheng, M Meng, A Borthwick, ... Supergen ORE Hub: Fourth Annual Assembly, 2022 | 2 | 2022 |
| Effects of marine environment exposure on the static and fatigue mechanical properties of carbon fibre-epoxy composite M Meng Plymouth University, 2016 | 2 | 2016 |
HUIRONG LETsinghua University, Plymouth University, University of Dundee, University of Cambridge在 mail.tsinghua.edu.cn 的电子邮件经过验证
