| Residual stress and texture control in Ti-6Al-4V wire + arc additively manufactured intersections by stress relief and rolling JR Hönnige, PA Colegrove, B Ahmad, ME Fitzpatrick, S Ganguly, TL Lee, ... Materials & Design 150, 193-205, 2018 | 182 | 2018 |
| Residual stress evaluation in selective-laser-melting additively manufactured titanium (Ti-6Al-4V) and inconel 718 using the contour method and numerical simulation B Ahmad, SO van der Veen, ME Fitzpatrick, H Guo Additive Manufacturing 22, 571-582, 2018 | 179 | 2018 |
| An experimental study of residual stress and direction-dependence of fatigue crack growth behaviour in as-built and stress-relieved selective-laser-melted Ti6Al4V AK Syed, B Ahmad, H Guo, T Machry, D Eatock, J Meyer, ME Fitzpatrick, ... Materials Science and Engineering: A 755, 246-257, 2019 | 155 | 2019 |
| Fatigue crack growth in a laser shock peened residual stress field M Pavan, D Furfari, B Ahmad, MA Gharghouri, ME Fitzpatrick International Journal of Fatigue 123, 157–167, 2019 | 82 | 2019 |
| Evaluation of residual stresses induced by cold spraying of Ti-6Al-4V on Ti-6Al-4V substrates D Boruah, B Ahmad, TL Lee, S Kabra, AK Syed, P McNutt, M Doré, ... Surface and Coatings Technology 374, 591-602, 2019 | 61 | 2019 |
| Prediction of residual stress within linear friction welds using a computationally efficient modelling approach C Bühr, B Ahmad, P Colegrove, A McAndrew, H Guo, X Zhang Materials & Design 139, 222-233, 2018 | 38 | 2018 |
| Minimization and mitigation of wire edm cutting errors in the application of the contour method of residual stress measurement B Ahmad, ME Fitzpatrick Metallurgical and Materials Transactions A 47 (1), 301-313, 2016 | 33 | 2016 |
| Effect of ultrasonic peening and accelerated corrosion exposure on the residual stress distribution in welded marine steel B Ahmad, ME Fitzpatrick Metallurgical and Materials Transactions A 46 (3), 1214-1226, 2015 | 29 | 2015 |
| Fatigue performance of friction stir welded marine grade steel H Polezhayeva, AI Toumpis, AM Galloway, L Molter, B Ahmad, ... International Journal of Fatigue 81, 162-170, 2015 | 26 | 2015 |
| Measurement and modelling of residual stress in wire-feed additively manufactured titanium B Ahmad, SO van der Veen, ME Fitzpatrick, H Guo Materials Science and Technology, 2018 | 22 | 2018 |
| Effects of process variants on residual stresses in wire arc additive manufacturing of aluminium alloy 5183 K Derekar, B Ahmad, X Zhang, S Joshi, J Lawrence, L Xu, A Addison, ... J. Manuf. Sci. Eng., 1-35, 2021 | 21 | 2021 |
| Influence of Deposition Strategies on Residual Stress in Wire + Arc Additive Manufactured Titanium Ti-6Al-4V B Ahmad, X Zhang, H Guo, M Fitzpatrick, L Neto, S Williams metals 12 (2), 253, 2022 | 19 | 2022 |
| The effect of compressive fatigue loads on fatigue strength of non-load carrying specimens subjected to ultrasonic impact treatment H Polezhayeva, D Howarth, M Kumar, B Ahmad, ME Fitzpatrick Welding in the World 59 (5), 713-721, 2015 | 18 | 2015 |
| Analysis of residual stresses in laser-shock-peened and shot-peened marine steel welds B Ahmad, ME Fitzpatrick Metallurgical and Materials Transactions A 48 (2), 759-770, 2017 | 15 | 2017 |
| The effect of laser shock peening on hardness and microstructure in a welded marine steel B Ahmad, ME Fitzpatrick The Journal of Engineering, 2015 | 8 | 2015 |
| Surface preparation for residual stress measurement of an accelerated corrosion tested welded marine steel B Ahmad, ME Fitzpatrick Corrosion Science 91, 357-360, 2015 | 7 | 2015 |
| Digital Image Correlation for Measuring Full-Field Residual Stresses in Wire and Arc Additive Manufactured Components D Boruah, N Dewagtere, B Ahmad, R Nunes, J Tacq, X Zhang, H Guo, ... Materials 16 (4), 1702, 2023 | 3 | 2023 |
| Residual Stresses in Ultrasonically Peened Fillet Welded Joints B Ahmad, M Fitzpatrick Advanced Materials Research 996 (Chapter III. Materials and Structures), 755-760, 2014 | 2 | 2014 |
| Feasibility study of friction stir joining of aluminium with carbon fibre reinforced thermoplastic composite L Malaske, LA Blaga, L Bergmann, B Ahmad, X Zhang, B Klusemann Journal of Composite Materials, 2024 | | 2024 |
| Residual Stresses in Alloy IN718 Produced Through Modulated Laser Powder Bed Fusion K Georgilas, H Guo, B Ahmad, R Khan, M Fitzpatrick, M Kartal Experimental Mechanics, 2023 | | 2023 |
