| Study on wear and rolling contact fatigue behaviors of wheel/rail materials under different slip ratio conditions L Ma, CG He, XJ Zhao, J Guo, Y Zhu, WJ Wang, QY Liu, XS Jin Wear 366, 13-26, 2016 | 139 | 2016 |
| Wear anisotropy of selective laser melted 316L stainless steel Y Yang, Y Zhu, MM Khonsari, H Yang Wear 428, 376-386, 2019 | 124 | 2019 |
| Tribology of selective laser melting processed parts: stainless steel 316 L under lubricated conditions Y Zhu, J Zou, X Chen, H Yang Wear 350, 46-55, 2016 | 118 | 2016 |
| Wear between wheel and rail: A pin-on-disc study of environmental conditions and iron oxides Y Lyu, Y Zhu, U Olofsson Wear 328, 277-285, 2015 | 111 | 2015 |
| Study on wear and RCF performance of repaired damage railway wheels: Assessing laser cladding to repair local defects on wheels Y Zhu, Y Yang, X Mu, W Wang, Z Yao, H Yang Wear 430, 126-136, 2019 | 103 | 2019 |
| Tribology of the wheel–rail contact–aspects of wear, particle emission and adhesion U Olofsson, Y Zhu, S Abbasi, R Lewis, S Lewis Vehicle System Dynamics 51 (7), 1091-1120, 2013 | 103 | 2013 |
| Additive manufacturing of products with functional fluid channels: A review C Zhang, S Wang, J Li, Y Zhu, T Peng, H Yang Additive Manufacturing 36, 101490, 2020 | 99 | 2020 |
| Friction between wheel and rail: a pin-on-disc study of environmental conditions and iron oxides Y Zhu, U Olofsson, H Chen Tribology letters 52, 327-339, 2013 | 83 | 2013 |
| Effect of surface texture on wear reduction of the tilting cylinder and the valve plate for a high-speed electro-hydrostatic actuator pump J Zhang, Y Chen, B Xu, Q Chao, Y Zhu, X Huang Wear 414, 68-78, 2018 | 73 | 2018 |
| Wear performance of metal parts fabricated by selective laser melting: a literature review Y Zhu, J Zou, H Yang Journal of Zhejiang University-SCIENCE A 19 (2), 95-110, 2018 | 68 | 2018 |
| Sliding wear of selective laser melting processed Ti6Al4V under boundary lubrication conditions Y Zhu, X Chen, J Zou, H Yang Wear 368, 485-495, 2016 | 64 | 2016 |
| Adhesion modeling in the wheel–rail contact under dry and lubricated conditions using measured 3D surfaces Y Zhu, U Olofsson, A Söderberg Tribology International 61, 1-10, 2013 | 64 | 2013 |
| Electrical energy consumption and mechanical properties of selective-laser-melting-produced 316L stainless steel samples using various processing parameters Y Zhu, T Peng, G Jia, H Zhang, S Xu, H Yang Journal of cleaner production 208, 77-85, 2019 | 63 | 2019 |
| Mapping the friction between railway wheels and rails focusing on environmental conditions Y Zhu, Y Lyu, U Olofsson Wear 324, 122-128, 2015 | 63 | 2015 |
| A study on cavitation erosion behavior of AlSi10Mg fabricated by selective laser melting (SLM) J Zou, Y Zhu, M Pan, T Xie, X Chen, H Yang Wear 376, 496-506, 2017 | 61 | 2017 |
| Investigation of factors influencing wheel–rail adhesion using a mini-traction machine Y Zhu, U Olofsson, K Persson Wear 292, 218-231, 2012 | 61 | 2012 |
| A study on the influence of surface topography on the low-speed tribological performance of port plates in axial piston pumps Y Zhu, X Chen, J Zou, H Yang Wear 338, 406-417, 2015 | 59 | 2015 |
| A field test study of leaf contamination on railhead surfaces Y Zhu, U Olofsson, R Nilsson Proceedings of the Institution of Mechanical Engineers, Part F: Journal of …, 2014 | 56 | 2014 |
| Effect of laser claddings of Fe-based alloy powder with different concentrations of WS2 on the mechanical and tribological properties of railway wheel H Ding, X Mu, Y Zhu, W Yang, Q Xiao, W Wang, Q Liu, J Guo, Z Zhou Wear 488, 204174, 2022 | 54 | 2022 |
| A study on iron oxides and surface roughness in dry and wet wheel− rail contacts Y Zhu, X Chen, W Wang, H Yang Wear 328, 241-248, 2015 | 51 | 2015 |
