| Modelling the effects of tool-edge radius on residual stresses when orthogonal cutting AISI 316L MNA Nasr, EG Ng, MA Elbestawi International Journal of Machine Tools and Manufacture 47 (2), 401-411, 2007 | 292 | 2007 |
| A modified time-efficient FE approach for predicting machining-induced residual stresses MNA Nasr, EG Ng, MA Elbestawi Finite Elements in Analysis and Design 44 (4), 149-161, 2008 | 96 | 2008 |
| Effects of edge preparation and feed when hard turning a hot work die steel with polycrystalline cubic boron nitride tools L Chen, TI El-Wardany, M Nasr, MA Elbestawi CIRP annals 55 (1), 89-92, 2006 | 80 | 2006 |
| Effects of workpiece thermal properties on machining-induced residual stresses-thermal softening and conductivity M Nasr, EG Ng, M Elbestawi Proceedings of the institution of mechanical engineers, part b: journal of …, 2007 | 69 | 2007 |
| Effects of strain hardening and initial yield strength on machining-induced residual stresses MNA Nasr, EG Ng, MA Elbestawi | 50 | 2007 |
| Effects of sequential cuts on residual stresses when orthogonal cutting steel AISI 1045 MNA Nasr Procedia CIRP 31, 118-123, 2015 | 45 | 2015 |
| An evaluation of different damage models when simulating the cutting process using FEM M Nasr, M Ammar Procdia CIRP 58, 134-139, 2017 | 38 | 2017 |
| Prediction of residual stresses after laser-assisted machining of Inconel 718 using SPH MA Balbaa, MNA Nasr Procedia CIRP 31, 19-23, 2015 | 33 | 2015 |
| Finite element modelling for part distortion calculation in selective laser melting SM Tawfik, MNA Nasr, HA El Gamal Alexandria Engineering Journal 58 (1), 67-74, 2019 | 32 | 2019 |
| Sensitivity analysis of cryogenic cooling on machining of magnesium alloy AZ31B-O MNA Nasr, JC Outeiro Procedia Cirp 31, 264-269, 2015 | 30 | 2015 |
| Enhanced Thermoelectric Performance of Bi85Sb15-graphene composite by Modulation Carrier Transport & Density of State Effective Mass M. El-Asfoury, M. Nasr, K. Nakamura, A. Abdel-Moneim J.of Alloys & Compounds 745, 331-340, 2018 | 26 | 2018 |
| Modeling and experimental testing of three-tip configuration tactile sensor for compensating the error due to soft tissue surface irregularities during stiffness detection A. Fouly, A. FathEl-Bab, M. Nasr, A. Abouelsoud Measurement 98, 112-122, 2017 | 23 | 2017 |
| Thermoelectric power factor performance of Bi85Sb15/graphene composite MS El-Asfoury, MNA Nasr, K Nakamura, A Abdel-Moneim Japanese Journal of Applied Physics 55 (4), 045802, 2016 | 21 | 2016 |
| Advanced Machining Processes: Innovative Modeling Techniques (Chapter 2) AP Markopoulos, JP Davim CRC Press, 2017 | 19 | 2017 |
| A sensitivity analysis on the effect of Laser power on residual stresses when Laser-assisted machining AISI 4340 M Balbaa, M Nasr, H Elgamal Procedia CIRP 58, 31-36, 2017 | 16 | 2017 |
| Modelling machining-induced residual stresses after laser-assisted turning of steels MNA Nasr, M Balbaa, H Elgamal Advanced Materials Research 996, 622-627, 2014 | 13 | 2014 |
| A physics-based model for metal matrix composites deformation during machining: a modified constitutive equation MNA Nasr, A Ghandehariun, HA Kishawy Journal of Engineering Materials and Technology 139 (1), 011003, 2017 | 11 | 2017 |
| Design and Modeling of Micro Tactile Sensor with Three Contact Tips for Self-Compensation of Contact Error in Soft Tissue Elasticity Measurement A. Fouly, M. Nasr, A. Fath El Bab, A. Abouelsoud IEEJ Trans. on Electrical & Electronic Engineering 10 (s1), s144-50, 2015 | 11 | 2015 |
| Variation of the residual stresses and springback in sheet bending from plane-strain to plane-stress condition using finite element modelling A Essa, MNA Nasr, MH Ahmed Proceedings of the 17th Int. AMME Conference 19, 21, 2016 | 9 | 2016 |
| On modelling of machining-induced residual stresses MNA Nasr Ph. D. Thesis, McMaster University, Hamilton, ON, Canada, 2008.[Google Scholar], 2008 | 9 | 2008 |
Eu-Gene NgMcMaster university在 mcmaster.ca 的电子邮件经过验证
