Effect of WC content on microstructures and mechanical properties of FeCoCrNi high-entropy alloy/WC composite coatings by plasma cladding Y Peng, W Zhang, T Li, M Zhang, B Liu, Y Liu, L Wang, S Hu Surface and Coatings Technology 385, 125326, 2020 | 101 | 2020 |
Microstructures and mechanical properties of FeCoCrNi high entropy alloy/WC reinforcing particles composite coatings prepared by laser cladding and plasma cladding YB Peng, W Zhang, TC Li, MY Zhang, L Wang, Y Song, SH Hu, Y Hu International Journal of Refractory Metals and Hard Materials 84, 105044, 2019 | 97 | 2019 |
Corrosion inhibition of pure Mg containing a high level of iron impurity in pH neutral NaCl solution J Yang, C Blawert, SV Lamaka, KA Yasakau, L Wang, D Laipple, ... Corrosion Science 142, 222-237, 2018 | 82 | 2018 |
New insights into high-temperature deformation and phase transformation mechanisms of lamellar structures in high Nb-containing TiAl alloys L Song, F Appel, L Wang, M Oehring, X Hu, A Stark, J He, U Lorenz, ... Acta Materialia 186, 575-586, 2020 | 69 | 2020 |
Investigation of carbides in Ti–45Al–5Nb–xC alloys (0≤ x≤ 1) by transmission electron microscopy and high energy-XRD H Gabrisch, A Stark, FP Schimansky, L Wang, N Schell, U Lorenz, ... Intermetallics 33, 44-53, 2013 | 63 | 2013 |
Reprogrammable, magnetically controlled polymeric nanocomposite actuators L Wang, MY Razzaq, T Rudolph, M Heuchel, U Nöchel, U Mansfeld, ... Materials Horizons 5 (5), 861-867, 2018 | 57 | 2018 |
High temperature oxidation behaviour of γ′-strengthened Co-based superalloys with different Ni addition B Gao, L Wang, Y Liu, X Song, SY Yang, A Chiba Corrosion Science 157, 109-115, 2019 | 48 | 2019 |
Thermal stability of γ′ phase in long-term aged Co Al W alloys Y Li, F Pyczak, M Oehring, L Wang, J Paul, U Lorenz, Z Yao Journal of Alloys and Compounds 729, 266-276, 2017 | 44 | 2017 |
Nucleation and thermal stability of carbide precipitates in high Nb containing TiAl alloys L Wang, H Gabrisch, U Lorenz, FP Schimansky, A Schreyer, A Stark, ... Intermetallics 66, 111-119, 2015 | 36 | 2015 |
Discontinuous and continuous precipitation characteristics and mechanical properties of a AZ80A magnesium alloy at different aging temperatures K Zhang, H Li, X Liang, Z Chen, L Wang Materials Characterization 161, 110146, 2020 | 34 | 2020 |
Microstructure evolution and enhanced creep property of a high Nb containing TiAl alloy with carbon addition L Song, X Hu, L Wang, A Stark, D Lazurenko, U Lorenz, J Lin, F Pyczak, ... Journal of Alloys and Compounds 807, 151649, 2019 | 34 | 2019 |
Morphology evolution of Ti3AlC carbide precipitates in high Nb containing TiAl alloys L Wang, C Zenk, A Stark, P Felfer, H Gabrisch, M Göken, U Lorenz, ... Acta Materialia 137, 36-44, 2017 | 34 | 2017 |
Influence of alloy composition and thermal history on carbide precipitation in γ-based TiAl alloys L Wang, U Lorenz, M Münch, A Stark, F Pyczak Intermetallics 89, 32-39, 2017 | 33 | 2017 |
A eutectic high-entropy alloy with good high-temperature strength-plasticity balance L Han, X Xu, L Wang, F Pyczak, R Zhou, Y Liu Materials Research Letters 7 (11), 460-466, 2019 | 32 | 2019 |
Influence of small amounts of Si and Cr on the high temperature oxidation behavior of novel cobalt base superalloys Z Liang, M Göken, U Lorenz, S Neumeier, M Oehring, F Pyczak, A Stark, ... Corrosion Science 184, 109388, 2021 | 31 | 2021 |
Site occupancy of alloying elements in the L12 structure determined by channeling enhanced microanalysis in γ/γ’Co-9Al-9W-2X alloys L Wang, M Oehring, Y Liu, U Lorenz, F Pyczak Acta Materialia 162, 176-188, 2019 | 31 | 2019 |
Effects of multiaxial forging on microstructure and high temperature mechanical properties of powder metallurgy Ti-45Al-7Nb-0.3 W alloy H Li, Y Long, X Liang, Y Che, Z Liu, Y Liu, H Xu, L Wang Intermetallics 116, 106647, 2020 | 30 | 2020 |
Microstructure, phase stability and element partitioning of γ-γ′ Co-9Al-9W-2X alloys in different annealing conditions L Wang, M Oehring, Y Li, L Song, Y Liu, A Stark, U Lorenz, F Pyczak Journal of Alloys and Compounds 787, 594-605, 2019 | 29 | 2019 |
Optimization of pack parameters for hot deformation of TiAl alloys L Wang, Y Liu, W Zhang, H Wang, Q Li Intermetallics 19 (1), 68-74, 2011 | 28 | 2011 |
Microstructures and wear-resistance of WC-reinforced high entropy alloy composite coatings by plasma cladding: effect of WC morphology Y Peng, W Zhang, T Li, M Zhang, L Wang, S Hu Surface Engineering 37 (5), 678-687, 2021 | 27 | 2021 |