| Effect of alloying elements on the γ’ antiphase boundary energy in Ni-base superalloys M. Dodaran, A. Hemmasian Ettefagh, S. M. Guo, M. M. Khonsari, W. J. Meng, N ... intermetallics 117, 106670, 2020 | 69 | 2020 |
| A theoretical calculation of stacking fault energy of Ni alloys: The effects of temperature and composition MS Dodaran, S Guo, MM Khonsari, N Shamsaei, S Shao Computational Materials Science 191, 110326, 2021 | 38 | 2021 |
| Synergistic effect of microstructure and defects on the initiation of fatigue cracks in additively manufactured Inconel 718 MS Dodaran, M Muhammad, N Shamsaei, S Shao International Journal of Fatigue 162, 107002, 2022 | 31 | 2022 |
| Mechanical failure of CrN/Cu/CrN interfacial regions under tensile loading X Zhang, Y Mu, M Dodaran, S Shao, D Moldovan, WJ Meng Acta Materialia 160, 1-13, 2018 | 25 | 2018 |
| Grain-size affected mechanical response and deformation behavior in microscale reverse extrusion B Zhang, M Dodaran, S Ahmed, S Shao, WJ Meng, KJ Juul, KL Nielsen Materialia 6, 100272, 2019 | 18 | 2019 |
| Critical operating stress of persistent slip bands in Cu M Dodaran, MM Khonsari, S Shao Computational Materials Science 165, 114-120, 2019 | 16 | 2019 |
| Energetic, structural and mechanical properties of terraced interfaces M Dodaran, J Wang, Y Chen, WJ Meng, S Shao Acta Materialia 171, 92-107, 2019 | 15 | 2019 |
| Understanding of plasticity size-effect governed mechanical response and incomplete die filling in a microscale double-punch molding configuration B Zhang, MS Dodaran, S Shao, J Choi, S Park, WJ Meng International journal of mechanical sciences 172, 105406, 2020 | 9 | 2020 |
| Investigating the interaction between persistent slip bands and surface hard coatings via crystal plasticity simulations MS Dodaran, J Wang, N Shamsaei, S Shao Crystals 10 (11), 1012, 2020 | 8 | 2020 |
| The Influence of Heat Treatments on the Microstructure and Tensile Properties of Additively Manufactured Inconel 939 R Gusain, M Soeimani Dodaran, PR Gradl, N Shamsaei, S Shao University of Texas at Austin, 2023 | 1 | 2023 |
| A Multiscale Investigation of the Fatigue Behavior of Additively Manufactured Nickel Superalloys MS Dodaran Auburn University, 2021 | | 2021 |
| Mechanical Response and Incomplete Filling in Compression Molding With Microscale Double-Punch Sets B Zhang, M Dodaran, S Shao, WJ Meng ASME 2019 International Mechanical Engineering Congress and Exposition, 2019 | | 2019 |
Shuai Shao (Auburn, formerly LSU & L...Nat'l Center for Additive Mfg. Excellence, Mechanical Engineering, Auburn University在 auburn.edu 的电子邮件经过验证
