| Phase transformations in an ultralight BCC Mg alloy during anisothermal ageing T Xin, S Tang, F Ji, L Cui, B He, X Lin, X Tian, H Hou, Y Zhao, M Ferry Acta Materialia 239, 118248, 2022 | 165 | 2022 |
| Revealing relationships between microstructure and hardening nature of additively manufactured 316L stainless steel L Cui, S Jiang, J Xu, RL Peng, RT Mousavian, J Moverare Materials & Design 198, 109385, 2021 | 142 | 2021 |
| The creep deformation mechanisms of a newly designed nickel-base superalloy L Cui, J Yu, J Liu, T Jin, X Sun Materials Science and Engineering: A 710, 309-317, 2018 | 68 | 2018 |
| Cyclic response of additive manufactured 316L stainless steel: The role of cell structures L Cui, F Jiang, D Deng, T Xin, X Sun, RT Mousavian, RL Peng, Z Yang, ... Scripta Materialia 205, 114190, 2021 | 52 | 2021 |
| Temperature dependence of tensile properties and deformation behaviors of nickel-base superalloy M951G L Cui, H Su, J Yu, J Liu, T Jin, X Sun Materials Science and Engineering: A 696, 323-330, 2017 | 46 | 2017 |
| A new approach for determining GND and SSD densities based on indentation size effect: An application to additive-manufactured Hastelloy X L Cui, CH Yu, S Jiang, X Sun, RL Peng, JE Lundgren, J Moverare Journal of Materials Science & Technology 96, 295-307, 2022 | 43 | 2022 |
| Dependence of microstructures on fatigue performance of polycrystals: A comparative study of conventional and additively manufactured 316L stainless steel L Cui, F Jiang, RL Peng, RT Mousavian, Z Yang, J Moverare International Journal of Plasticity 149, 103172, 2021 | 42 | 2021 |
| Superior low cycle fatigue property from cell structures in additively manufactured 316L stainless steel L Cui, D Deng, F Jiang, RL Peng, T Xin, RT Mousavian, Z Yang, ... Journal of Materials Science & Technology, 2021 | 39 | 2021 |
| The creep deformation and fracture behaviors of nickel-base superalloy M951G at 900 C L Cui, H Su, J Yu, J Liu, T Jin, X Sun Materials Science and Engineering: A 707, 383-391, 2017 | 32 | 2017 |
| Microstructural evolutions and fracture behaviors of a newly developed nickel-base superalloy during creep deformation L Cui, J Yu, J Liu, X Sun Journal of Alloys and Compounds 746, 335-349, 2018 | 23 | 2018 |
| Post-treatment of additively manufactured Fe–Cr–Ni stainless steels by high pressure torsion: TRIP effect A Heidarzadeh, M Neikter, N Enikeev, L Cui, F Forouzan, RT Mousavian Materials Science and Engineering: A 811, 141086, 2021 | 22 | 2021 |
| Low cycle fatigue behavior and microstructural evolution of nickel-based superalloy M951G at elevated temperatures L Cui, J Liu, RL Peng, J Yu, J Moverare, X Sun Materials Characterization 163, 110241, 2020 | 19 | 2020 |
| Enhancing elevated-temperature fretting wear performance of GH4169 by tuning wear mechanism through laser shock peening W Zhao, W He, X Liang, Z Huang, Q Zhou, Z Pang, J Song, S Hu, L Cui, ... Tribology International 192, 109215, 2024 | 10 | 2024 |
| Impeding the γ′ depletion during the interdiffusion between bond coatings and superalloys via introduction of tantalum in bond coatings X Sun, P Zhang, J Moverare, XH Li, L Cui, RL Peng Materials & Design 227, 111792, 2023 | 8 | 2023 |
| Cyclic stress responses of a newly developed nickel-base superalloy at elevated temperatures L Cui, J Yu, J Liu, X Sun Journal of Alloys and Compounds 773, 250-263, 2019 | 6 | 2019 |
| New insights into the anisotropic ductility of additively manufactured Inconel 718 L Cui, D Deng, S Jiang, RL Peng, T Xin, H Zhang, Z Hegedüs, U Lienert, ... International Journal of Plasticity 169, 103738, 2023 | 4 | 2023 |
| Insights into room-and elevated-temperature micro-mechanisms of laser shock peened M50 steel with superior tribological performance Z Cao, L Cui, S Luo, J Song, H Su, Z Pang, W Zhao, W He, X Liang Journal of Materials Science & Technology 205, 270-285, 2025 | | 2025 |
| Superior high-cycle fatigue property through in-situ precipitation of α'martensite in additively repaired titanium alloy Z Pang, L Cui, W He, X Liang, Z Cao, W Zhao, J Song, S Hu, S Luo Journal of Alloys and Compounds 996, 174875, 2024 | | 2024 |
| Controlling of microstructures and mechanical properties based on the non-equilibrium microstructures of a nickel-based superalloy fabricated by laser powder bed fusion W Zhang, S Gao, S Li, L Lan, D Zhang, G Lu, L Cui, L Li, B He Materials Science and Engineering: A 900, 146487, 2024 | | 2024 |
| Enhancing Plasticity in BCC Mg-Li-Al Alloys Through Controlled Precipitation at Grain Boundaries F Ji, T Xin, Y Zhao, W Yang, G Bai, S Tang, EY Guo, M Zhou, Q Shi, L Cui, ... Available at SSRN 4717849, 0 | | |
Johan MoverareProfessor in Engineering Materials, Dept of Management and Engineering, Linköping University, Sweden在 liu.se 的电子邮件经过验证
