Synthesis of boron carbide powder by a carbothermic reduction method A Alizadeh, E Taheri-Nassaj, N Ehsani Journal of the European Ceramic Society 24 (10-11), 3227-3234, 2004 | 191 | 2004 |
Mechanical properties and wear behavior of Al–2 wt.% Cu alloy composites reinforced by B4C nanoparticles and fabricated by mechanical milling and hot extrusion A Alizadeh, E Taheri-Nassaj Materials characterization 67, 119-128, 2012 | 119 | 2012 |
Effect of Al addition on pressureless sintering of B4C M Mashhadi, E Taheri-Nassaj, VM Sglavo, H Sarpoolaky, N Ehsani Ceramics International 35 (2), 831-837, 2009 | 116 | 2009 |
Pressureless sintering of boron carbide M Mashhadi, E Taheri-Nassaj, VM Sglavo Ceramics International 36 (1), 151-159, 2010 | 112 | 2010 |
Economical synthesis of nano alumina powder using an aqueous sol–gel method M Shojaie-Bahaabad, E Taheri-Nassaj Materials Letters 62 (19), 3364-3366, 2008 | 112 | 2008 |
Synthesis of an alumina–YAG nanopowder via sol–gel method SA Hassanzadeh-Tabrizi, E Taheri-Nassaj, H Sarpoolaky Journal of alloys and compounds 456 (1-2), 282-285, 2008 | 98 | 2008 |
An alumina mat with a nano microstructure prepared by centrifugal spinning method A Sedaghat, E Taheri-Nassaj, R Naghizadeh Journal of Non-Crystalline Solids 352 (26-27), 2818-2828, 2006 | 89 | 2006 |
The effects of nanoscale expansive agents on the mechanical properties of non-shrink cement-based composites: The influence of nano-MgO addition R Moradpour, E Taheri-Nassaj, T Parhizkar, M Ghodsian Composites Part B: Engineering 55, 193-202, 2013 | 87 | 2013 |
Preparation and investigation of Al–4 wt % B4C nanocomposite powders using mechanical milling A Alizadeh, E Taheri-Nassaj, HR Baharvandi Bulletin of Materials Science 34, 1039-1048, 2011 | 82 | 2011 |
Hot extrusion process effect on mechanical behavior of stir cast Al based composites reinforced with mechanically milled B4C nanoparticles A Alizadeh, E Taheri-Nassaj, M Hajizamani Journal of Materials Science & Technology 27 (12), 1113-1119, 2011 | 75 | 2011 |
Gelcasting of alumina nanopowders based on gelation of sodium alginate H Akhondi, E Taheri-Nassaj, H Sarpoolaky, A Taavoni-Gilan Ceramics International 35 (3), 1033-1037, 2009 | 60 | 2009 |
Synthesis of nanosized (Co, Nb, Sm)-doped SnO2 powders using co-precipitation method H Bastami, E Taheri-Nassaj Journal of alloys and compounds 495 (1), 121-125, 2010 | 58 | 2010 |
Pressureless sintering of B4C–TiB2 composites with Al additions M Mashhadi, E Taheri-Nassaj, M Mashhadi, VM Sglavo Ceramics International 37 (8), 3229-3235, 2011 | 57 | 2011 |
Effect of synthesis parameters on a hematite–silica red pigment obtained using a coprecipitation route M Hosseini-Zori, F Bondioli, T Manfredini, E Taheri-Nassaj Dyes and Pigments 77 (1), 53-58, 2008 | 56 | 2008 |
An in situ WC–Ni composite fabricated by the SHS method E Taheri-Nassaj, SH Mirhosseini Journal of Materials Processing Technology 142 (2), 422-426, 2003 | 55 | 2003 |
Economical synthesis of Al2O3 nanopowder using a precipitation method SA Hassanzadeh-Tabrizi, E Taheri-Nassaj Materials Letters 63 (27), 2274-2276, 2009 | 53 | 2009 |
An alumina–YAG nanostructured fiber prepared from an aqueous sol–gel precursor: preparation, rheological behavior and spinnability M Shojaie-Bahaabad, E Taheri-Nassaj, R Naghizadeh Ceramics International 34 (8), 1893-1902, 2008 | 52 | 2008 |
A new temperature stable microwave dielectric ceramic with low-sintering temperature in Li2TiO3–Li2Zn3Ti4O12 system A Sayyadi-Shahraki, E Taheri-Nassaj, SA Hassanzadeh-Tabrizi, ... Journal of alloys and compounds 597, 161-166, 2014 | 50 | 2014 |
Microwave dielectric properties of Mg1. 8R0. 2Al4Si5O18 (R= Mg, Ca, Sr, Ba, Mn, Co, Ni, Cu, Zn) cordierite ceramics and their application for 5G microstrip patch antenna W Lou, K Song, F Hussain, A Khesro, J Zhao, HB Bafrooei, T Zhou, B Liu, ... Journal of the European Ceramic Society 42 (5), 2254-2260, 2022 | 47 | 2022 |
The effect of zirconia content on properties of Al2O3–ZrO2 (Y2O3) composite nanopowders synthesized by aqueous sol–gel method A Taavoni-Gilan, E Taheri-Nassaj, H Akhondi Journal of Non-Crystalline Solids 355 (4-5), 311-316, 2009 | 47 | 2009 |