| Experimental determination of the permeability of engineering textiles: Benchmark II N Vernet, E Ruiz, S Advani, JB Alms, M Aubert, M Barburski, B Barari, ... Composites Part A: Applied Science and Manufacturing 61, 172-184, 2014 | 345 | 2014 |
| In-plane permeability characterization of engineering textiles based on radial flow experiments: A benchmark exercise D May, A Aktas, SG Advani, DC Berg, A Endruweit, E Fauster, SV Lomov, ... Composites Part A: Applied Science and Manufacturing 121, 100-114, 2019 | 110 | 2019 |
| High-resolution computed tomography in resin infused woven carbon fibre composites with voids SM Sisodia, SC Garcea, AR George, DT Fullwood, SM Spearing, ... Composites Science and Technology 131, 12-21, 2016 | 71 | 2016 |
| Optimization of resin infusion processing for composite materials: simulation and characterization strategies A George Stuttgart, Univ., Diss., 2011, 2011 | 43 | 2011 |
| Out-of-plane permeability measurement for reinforcement textiles: A benchmark exercise AXH Yong, A Aktas, D May, A Endruweit, S Advani, P Hubert, SG Abaimov, ... Composites Part A: Applied Science and Manufacturing 148, 106480, 2021 | 40 | 2021 |
| Experimental characterisation of textile compaction response: A benchmark exercise AXH Yong, A Aktas, D May, A Endruweit, SV Lomov, S Advani, P Hubert, ... Composites Part A: Applied Science and Manufacturing 142, 106243, 2021 | 40 | 2021 |
| Materials characterisation and analysis for flow simulation of liquid resin infusion J Sirtautas, AK Pickett, A George Applied Composite Materials 22, 323-341, 2015 | 24 | 2015 |
| Comparison of corneal epithelial cellular growth on synthetic cornea materials A George, WG Pitt Biomaterials 23 (5), 1369-1373, 2002 | 23 | 2002 |
| Compressibility measurement of composite reinforcements for flow simulation of vacuum infusion A George, P Hannibal, M Morgan, D Hoagland, SE Stapleton Polymer Composites 40 (3), 961-973, 2019 | 15 | 2019 |
| Optical measurement of voids in situ during infusion of carbon reinforcements C Lystrup, A George, B Zobell, K Boster, C Childs, H Girod, D Fullwood Journal of Composite Materials 55 (6), 775-786, 2021 | 12 | 2021 |
| The effects of voids in quasi-static indentation of resin-infused reinforced polymers SM Sisodia, DJ Bull, AR George, EK Gamstedt, MN Mavrogordato, ... Journal of Composite Materials 53 (28-30), 4399-4410, 2019 | 10 | 2019 |
| Continuous permeability measurement during unidirectional vacuum infusion processing D Hoagland, A George Journal of Reinforced Plastics and Composites 36 (22), 1618-1628, 2017 | 10 | 2017 |
| Optimization of 3D wetting permeability measurements A George, A Pickett, J Sirtautas, K Drechsler Proceedings of the FPCM 11, 18-25, 2012 | 9 | 2012 |
| Void modeling in resin infusion A George, M Brandley, R Dart, D Fullwood J. Adv. Mater 1, 79-93, 2015 | 7 | 2015 |
| Dispersion metrics for composites–a machine learning based analysis D Fullwood, D Gerrard, A George, D Halverson SAMPE 2013, Long Beach, USA, 2013 | 6 | 2013 |
| Optimization of resin infusion processing for composite materials A George Simulation and Characterization Strategies, 2011 | 5 | 2011 |
| A New Spectroscopic Method for the Non-Destructive Characterization of Weathering Damage in Plastics AR George Brigham Young University-Provo, 2006 | 5 | 2006 |
| Void characterization and membrane selection in the vacuum assisted process A George, K Drechsler 15th European conference on composite materials, 2012 | 4 | 2012 |
| Effects of debulking on the fiber microstructure and void distribution in carbon fiber reinforced plastics M Schey, T Beke, K Owens, A George, E Pineda, S Stapleton Composites Part A: Applied Science and Manufacturing 165, 107364, 2023 | 3 | 2023 |
| Characterisation of voids and their influence on damage propagation in resin infused carbon fibre reinforced polymers S Sisodia, M Mavrogordato, A George, DJ Bull, SM Spearing, ... Proceedings of ICCM20, 2015 | 3 | 2015 |
