Synthesis, Characterization, and Intrinsic Hardness of Layered Nanolaminate Ti3AlC2 and Ti3Al0.8Sn0.2C2 Solid Solution GP Bei, V Gauthier‐Brunet, C Tromas, S Dubois Journal of the American Ceramic Society 95 (1), 102-107, 2012 | 89 | 2012 |
Powder metallurgy processing and compressive properties of Ti3AlC2/Al composites WJ Wang, V Gauthier-Brunet, GP Bei, G Laplanche, J Bonneville, ... Materials Science and Engineering: A 530, 168-173, 2011 | 85 | 2011 |
Synthesis, Microstructure, and Mechanical Properties of Ti3Sn(1−x)AlxC2 MAX Phase Solid Solutions S Dubois, GP Bei, C Tromas, V Gauthier‐Brunet, P Gadaud International Journal of Applied Ceramic Technology 7 (6), 719-729, 2010 | 77 | 2010 |
Synthesis and microstructure of Ti3AlC2 by mechanically activated sintering of elemental powders SB Li, HX Zhai, GP Bei, Y Zhou, ZL Zhang Ceramics international 33 (2), 169-173, 2007 | 76 | 2007 |
Preparation of Zr4+ doped calcium hexaaluminate with improved slag penetration resistance C Guo, E Wang, X Hou, J Kang, T Yang, T Liang, G Bei Journal of the American Ceramic Society, 2021 | 65 | 2021 |
Oxidation Behavior of MAX Phase Ti2Al(1−x)SnxC Solid Solution G Bei, BJ Pedimonte, T Fey, P Greil Journal of the American Ceramic Society 96 (5), 1359-1362, 2013 | 63 | 2013 |
Ultra-high temperature ablation behavior of MoAlB ceramics under an oxyacetylene flame G Bei, S van der Zwaag, S Kota, MW Barsoum, WG Sloof Journal of the European Ceramic Society 39 (6), 2010-2017, 2019 | 56 | 2019 |
Toughening Mechanisms in Nanolayered MAX Phase Ceramics—A Review GB Xin hua Chen Materials 10 (4), 366, 2017 | 52 | 2017 |
Sintering and properties of mechanical alloyed Ti3AlC2-Cu composites W Wang, H Zhai, L Chen, Y Zhou, Z Huang, G Bei, P Greil Materials Science and Engineering: A 685, 154-158, 2017 | 44 | 2017 |
Crack healing induced electrical and mechanical properties recovery in a Ti2SnC ceramic S Li, G Bei, X Chen, L Zhang, Y Zhou, M Mačković, E Spiecker, P Greil Journal of the European Ceramic Society 36 (1), 25-32, 2016 | 44 | 2016 |
Formation of Ti3AlC2 by mechanically induced self-propagating reaction in Ti–Al–C system at room temperature SB Li, HX Zhai, GP Bei, Y Zhou, ZL Zhang Materials science and technology 22 (6), 667-672, 2006 | 39 | 2006 |
Compressive Behavior of Ti3AlC2 and Ti3Al0.8Sn0.2C2 MAX Phases at Room Temperature GP Bei, G Laplanche, V Gauthier‐Brunet, J Bonneville, S Dubois Journal of the American Ceramic Society 96 (2), 567-576, 2013 | 38 | 2013 |
Synthesis of Ti2SnC from Ti/Sn/TiC powder mixtures by pressureless sintering technique SB Li, GP Bei, HX Zhai, Y Zhou Materials Letters 60 (29-30), 3530-3532, 2006 | 37 | 2006 |
Bimodal Microstructure and Reaction Mechanism of Ti2SnC Synthesized by a High‐Temperature Reaction Using Ti/Sn/C and Ti/Sn/TiC Powder Compacts SB Li, GP Bei, HX Zhai, Y Zhou Journal of the American Ceramic Society 89 (12), 3617-3623, 2006 | 35 | 2006 |
Crack Healing in Ti2Al0.5Sn0.5C–Al2O3 Composites GP Bei, BJ Pedimonte, M Pezoldt, J Ast, T Fey, M Goeken, P Greil Journal of the American Ceramic Society 98 (5), 1604-1610, 2015 | 33 | 2015 |
Synthesis of Ti2SnC at low-temperature using mechanically activated sintering process SB Li, GP Bei, HX Zhai, Y Zhou, CW Li Materials Science and Engineering: A 457 (1-2), 282-286, 2007 | 33 | 2007 |
Autonomous high‐temperature healing of surface cracks in Al2O3 containing Ti2AlC particles L Boatemaa, M Bosch, AS Farle, GP Bei, S van der Zwaag, WG Sloof Journal of the American Ceramic Society 101 (12), 5684-5693, 2018 | 29 | 2018 |
Pressure-enforced plasticity in MAX phases: from single grain to polycrystal investigation GP Bei, A Guitton, A Joulain, V Brunet, S Dubois, L Thilly, C Tromas Philosophical Magazine 93 (15), 1784-1801, 2013 | 29 | 2013 |
Synthesis, crystal structure, microstructure and mechanical properties of (Ti1-xZrx) 3SiC2 MAX phase solid solutions L Qu, G Bei, B Stelzer, H Rueß, JM Schneider, D Cao, S van der Zwaag, ... Ceramics International 45 (1), 1400-1408, 2019 | 28 | 2019 |
Preparation and mechanical properties of in situ TiCx–Ni (Si, Ti) alloy composites W Wang, H Zhai, L Chen, Z Huang, G Bei, C Baumgärtner, P Greil Materials Science and Engineering: A 616, 214-218, 2014 | 27 | 2014 |