A review of vat photopolymerization technology: materials, applications, challenges, and future trends of 3D printing M Pagac, J Hajnys, QP Ma, L Jancar, J Jansa, P Stefek, J Mesicek Polymers 13 (4), 598, 2021 | 519 | 2021 |
Influence of scanning strategy parameters on residual stress in the SLM process according to the bridge curvature method for AISI 316L stainless steel J Hajnys, M Pagáč, J Měsíček, J Petru, M Król Materials 13 (7), 1659, 2020 | 61 | 2020 |
Prediction of model distortion by FEM in 3D printing via the selective laser melting of stainless steel AISI 316L M Pagac, J Hajnys, R Halama, T Aldabash, J Mesicek, L Jancar, J Jansa Applied sciences 11 (4), 1656, 2021 | 37 | 2021 |
On flexural properties of additive manufactured composites: Experimental, and numerical study D Krzikalla, J Měsíček, R Halama, J Hajnyš, M Pagáč, T Čegan, J Petrů Composites science and technology 218, 109182, 2022 | 33 | 2022 |
A review of vat photopolymerization technology: Materials, applications, challenges, and future trends of 3D printing. Polymers, 13: 598 M Pagac, J Hajnys, QP Ma, L Jancar, J Jansa, P Stefek, J Mesicek | 33 | 2021 |
Abrasive surface finishing on SLM 316L parts fabricated with recycled powder J Mesicek, QP Ma, J Hajnys, J Zelinka, M Pagac, J Petru, O Mizera Applied Sciences 11 (6), 2869, 2021 | 25 | 2021 |
Analysis of torsional stiffness of the frame of a formula student vehicle D Krzikalla, J Mesicek, J Petru, A Sliva, J Smiraus Applied Mechanical Engineering 7, 315, 2019 | 20 | 2019 |
3D printed hollow off-axis profiles based on carbon fiber-reinforced polymers: mechanical testing and finite element method analysis M Kalova, S Rusnakova, D Krzikalla, J Mesicek, R Tomasek, ... Polymers 13 (17), 2949, 2021 | 17 | 2021 |
Comprehensive view of topological optimization scooter frame design and manufacturing J Mesicek, L Jancar, QP Ma, J Hajnys, T Tanski, P Krpec, M Pagac Symmetry 13 (7), 1201, 2021 | 14 | 2021 |
Research of 316L metallic powder for use in SLM 3D printing J Hajnys, M Pagac, J Mesicek, J Petru, F Spalek Advances in Materials Science 20 (1), 5-15, 2020 | 14 | 2020 |
Topological optimization of the formula student bell crank J Měsíček, M Pagáč, J Petrů, P Novák, J Hajnyš, K Kutiová MM Science, 2019 | 14 | 2019 |
Design procedure of a topologically optimized scooter frame part L Jancar, M Pagac, J Mesicek, P Stefek Symmetry 12 (5), 755, 2020 | 13 | 2020 |
On Aluminum honeycomb impact attenuator designs for formula student competitions PM Quoc, D Krzikalla, J Mesicek, J Petru, J Smiraus, A Sliva, Z Poruba Symmetry 12 (10), 1647, 2020 | 11 | 2020 |
Optimizing a quadruped robot: a comparison of two methods R Pastor, Z BOBOVSKY, P OSCADAL, J MESICEK, M PAGAC, E Prada, ... MM Science Journal 2, 2021 | 10 | 2021 |
On modelling of simulation model for racing car frame torsional stiffness analysis D Krzikalla, A Slíva, J Měsíček, J Petrů Alexandria Engineering Journal 59 (6), 5123-5133, 2020 | 10 | 2020 |
Effect of artificial aging on the strength, hardness, and residual stress of SLM AlSi10Mg parts prepared from the recycled powder J Měsíček, T Čegan, QP Ma, R Halama, K Skotnicová, J Hajnyš, J Juřica, ... Materials Science and Engineering: A 855, 143900, 2022 | 9 | 2022 |
Residual stress build-up in aluminum parts fabricated with SLM technology using the bridge curvature method QP Ma, J Mesicek, F Fojtik, J Hajnys, P Krpec, M Pagac, J Petru Materials 15 (17), 6057, 2022 | 9 | 2022 |
Complex view to racing car upright design and manufacturing J Mesicek, M Richtar, J Petru, M Pagac, K Kutiova Manuf. Technol 18, 449-456, 2018 | 8 | 2018 |
A Bibliometrics Analysis of Medical Internet of Things for Modern Healthcare HS Nguyen, HC Danh, QP Ma, J Mesicek, J Hajnys, M Pagac, J Petru Electronics 12 (22), 4586, 2023 | 6 | 2023 |
Restoration and possible upgrade of a historical motorcycle part using powder bed fusion L Kudrna, QP Ma, J Hajnys, J Mesicek, R Halama, F Fojtik, L Hornacek Materials 15 (4), 1460, 2022 | 6 | 2022 |