Impact of the cold end operating conditions on energy efficiency of the steam power plants MS Laković, MM Stojiljković, SV Laković, VP Stefanović, DD Mitrović Thermal Science 14 (suppl.), 53-66, 2010 | 65 | 2010 |
Sustainability assessment of residential buildings by non-linear normalization procedure B Vučićević, M Stojiljković, N Afgan, V Turanjanin, M Jovanović, V Bakić Energy and Buildings 58, 348-354, 2013 | 34 | 2013 |
Thermal mass impact on energy performance of a low, medium and heavy mass building in Belgrade BV Anđelković, BV Stojanović, MM Stojiljković, JN Janevski, ... Thermal Science 16 (suppl. 2), 447-459, 2012 | 31 | 2012 |
Multi-objective combinatorial optimization of trigeneration plants based on metaheuristics MM Stojiljković, MM Stojiljković, BD Blagojević Energies 7 (12), 8554-8581, 2014 | 30 | 2014 |
Influence of glazing types and ventilation principles in double skin façades on delivered heating and cooling energy during heating season in an office building MG Ignjatović, BD Blagojević, BV Stojanović, MM Stojiljković Thermal Science 16 (suppl. 2), 461-469, 2012 | 28 | 2012 |
Green living roof implementation and influences of the soil layer on its properties DG Dimitrijević, PM Živković, MM Stojiljković, MN Todorović, ... Thermal science 20 (suppl. 5), 1511-1520, 2016 | 15 | 2016 |
Entropy and fractal nature VV Mitić, GM Lazović, J Manojlović, WC Huang, MM Stojiljković, H Facht, ... Thermal science 24 (3 Part B), 2203-2212, 2020 | 14 | 2020 |
Numerical study of perforated plate convective heat transfer MA Tomić, PZ Živković, MV Vukić, GS Ilić, MM Stojiljković Thermal science 18 (3), 949-956, 2014 | 13 | 2014 |
Experimental study on drying kinetics of solid particles in fluidized bed W Ciesielczyk, M Stojiljković, G Ilić, N Radojković, M Vukić Facta universitatis-series: Mechanical Engineering 1 (4), 469-478, 1997 | 12 | 1997 |
Mathematical modeling and optimization of tri-generation systems with reciprocating engines MM Stojiljković, MM Stojiljković, BD Blagojević Thermal science 14 (2), 541-553, 2010 | 10 | 2010 |
Coal-fired power plant power output variation due to local weather conditions MS Laković, D Mitrović, V Stefanović, M Stojiljković Energy Sources, Part A: Recovery, Utilization, and Environmental Effects 34 …, 2012 | 9 | 2012 |
Mathematical model of unsteady gas to solid particles heat transfer in fluidized bed MM Stojiljković, BV Stojanović, JN Janevski, GS Ilić Thermal Science 13 (1), 55-68, 2009 | 8 | 2009 |
Effects of implementation of co-generation in the district heating system of the Faculty of Mechanical Engineering in Niš MM Stojiljković, MM Stojiljković, BD Blagojević, GD Vučković, ... Thermal Science 14 (suppl.), 41-51, 2010 | 7 | 2010 |
Convective heat and mass transfer under the conditions of hydrodynamic stabilization of the flow S Laković, V Stefanović, G Ilić, M Stojiljković Int. J. The Scientific Journal FACTA UNIVERSITATIS 1 (4), 397-407, 1997 | 7 | 1997 |
Thermal characteristics and potential for retrofit by using green vegetated roofs D Dimitrijevic, M Tomic, P Zivkovic, M Stojiljkovic, M Dobrnjac Annals of the Faculty of Engineering Hunedoara 14 (1), 41, 2016 | 6 | 2016 |
Exergoeconomic evaluation of real processes for coffee roasting GD Vučković, MM Stojiljković, GM Vasiljević Thermal Science 20 (suppl. 5), 1271-1283, 2016 | 4 | 2016 |
Cost-optimal energy retrofit for Serbian residential buildings connected to district heating systems MM Stojiljković, MM Stojiljković, MG Ignjatović, GD Vučković Thermal Science 23 (Suppl. 5), 1707-1717, 2019 | 3 | 2019 |
Preliminarni energetski bilans kotlovskog postrojenja fabrike ad pivara Niš M Stojiljković, G Vučković, D Mitrović, M Stojiljković Zbornik Međunarodnog kongresa o KGH 36 (1), 378-385, 2019 | 2 | 2019 |
Rationality of choice of working parameters and equipment for power plant close-cycle cooling SV Laković, MS Laković, VP Stefanović, MM Stojiljković Termotehnika 36 (1), 79-91, 2010 | 2 | 2010 |
Thermal diffusivity coefficients by air fluidized bed JN Janevski, B Stojanović, M Stojiljković Facta universitatis-series: Mechanical Engineering 2 (1), 125-134, 2004 | 2 | 2004 |