[Retracted] Parameters of Porosity and Compressive Strength‐Based Optimization on Reinforced Aluminium from the Recycled Waste Automobile Frames A Parthiban, V Vijayan, T Sathish, S Dinesh Kumar, L Ponraj Sankar, ... Advances in Materials Science and Engineering 2021 (1), 3648480, 2021 | 111* | 2021 |
Effect of silane treated silicon (IV) oxide nanoparticle addition on mechanical, impact damage and drilling characteristics of Kenaf fibre-reinforced epoxy composite N Parthipan, M Ilangkumaran, T Maridurai, SC Prasanna Silicon 12 (2), 459-467, 2020 | 39 | 2020 |
OPTIMIZATION OF DRILLING PARAMETERS ON AUSTENITIC STAINLESS STEEL (AISI 316) USING TAGUCHI'S METHODOLOGY NP M Sundeep, M Sudhahar , T T M Kannan, P Vijaya Kumar International journal of Mechanical Engineering and Robotic Research 3 (4), 2014 | 18 | 2014 |
A CFD investigation and heat transfer augmentation of double pipe heat exchanger by employing helical baffles on shell and tube side S Anantha, S Gnanamani, V Mahendran, V Rathinavelu, R Rajagopal, ... Thermal Science 26 (2 Part A), 991-998, 2022 | 16 | 2022 |
Investigation of the TIG welding process for joining AA6082 alloy using grey relational analysis GS Kumar, M Ramesh, S Dinesh, P Paramasivam, N Parthipan Advances in Materials Science and Engineering 2022 (1), 5670172, 2022 | 15 | 2022 |
Influences of nanosilica particles on density, mechanical, and tribological properties of sisal/hemp hybrid nanocomposite K Dhanasekar, AM Krishnan, G Kaliyaperumal, MV De Poures, ... Advances in Polymer Technology 2023 (1), 3684253, 2023 | 10 | 2023 |
Effects of g-C3N4 on mechanical and thermal properties of epoxy nanocomposites G Navaneethakrishnan, N Parthipan, K Chellamuthu Materials Today: Proceedings 69, 962-966, 2022 | 8 | 2022 |
Effect of hardness and tensile properties of Al6061 based composites for piston alloy using stir casting method A Manikandan, C Gokulkumar, N Parthipan J Chem Pharma Sci 3, 23-27, 2017 | 8 | 2017 |
Optimization of drilling parameters in AISI SS317L stainless steel material using Taguchi methodology C Manickam, N Parthipan Materials Today: Proceedings 21, 837-842, 2020 | 6 | 2020 |
Influence of hybrid SiO2 and CeO2 nanoparticles on diesel engine emission operated with distilled tire oil blend R Chinnappan, M Chandran, RM Elavarasan, P Nadarajan Environmental Science and Pollution Research 29 (20), 30568-30583, 2022 | 3 | 2022 |
MULTI OBJECTIVE OPTIMIZATION FOR DRILLING PROCESS STRESSES IN SS317 MATERIAL PN MANICKAM. C International Journal of Mechanical and Production Engineering Research and …, 2018 | 3* | 2018 |
Mechanical strength and water absorption analysis of silane treated kenaf natural composites with silicon nanoparticles N Parthipan, C Ramesh, C Mohanraj, S Padmavathy, CK Ang | 2 | 2021 |
FABRICATION OF METAL MATRIX COMPOSITE FOR BRAKE DRUM-A CHARACTERISTIC STUDY OF TRIBOLOGICAL PROPERTIES MA PARTHIPAN. N International Journal of Mechanical and Production Engineering Research and …, 2018 | 2* | 2018 |
Optimization parameters of drilling process in electric discharge machining used in SS317 material N Parthipan, SC Prasanna, R Balamurugan, A Manikandan Pak. J. Biotechnol 14, 99-102, 2017 | 2 | 2017 |
Durability, Lube Oil Contamination and a Ferrography Study on a Diesel Engine Fuelled with Distilled Tyre Oil K Ragupathi, I Mani, P Nadarajan Transactions of FAMENA 46 (4), 1-18, 2022 | 1 | 2022 |
Material synthesis, characterization and performance measurement of laser drilling for stir casted Cu-Ni-Tib2 metal matrix N Parthipan, M Ilangkumaran Materials Today: Proceedings 21, 392-400, 2020 | 1 | 2020 |
Optimization of Machining Parameters on Surface Roughness and MRR in Drilling AISI 429 Steel Using Response Surface Method. N Parthipan, M Ilangkumaran International Journal of Emerging Trends in Science & Technology 5 (2), 2019 | 1 | 2019 |
Eco Friendly Drilling Process in AISI SS317 Material N Parthipan, M Ilangkumaran, S Nandhakumar, K Christal Journal of Chemical and Pharmaceutical Sciences ISSN 974, 2115, 2017 | 1 | 2017 |
E-glass fiber featured hybrid aluminium alloy composite: Metallographic, mechanical and fracture failure study R Venkatesh, N Parthipan, P Kumar, S Muthukumarasamy, I Hossain, ... Journal of Mechanical Science and Technology, 1-6, 2024 | | 2024 |
Investigation of Tensile and Hardness Properties in Al2024+ SiC+ Seashell Hybrid Composite Material K Bhavadharani, M Balaji, G Jotheeshwaran, N Parthipan International Journal of Vehicle Structures & Systems 15 (4), 552-554, 2023 | | 2023 |