Grain refinement effects on the strain rate sensitivity and grain boundary sliding in partially solidified Al–5 wt% Mg alloy R Takai, S Kimura, R Kashiuchi, H Kotaki, M Yoshida Materials Science and Engineering: A 667, 417-425, 2016 | 43 | 2016 |
Development of an elasto-viscoplastic constitutive equation for an Al-Mg alloy undergoing a tensile test during partial solidification R Takai, A Matsushita, S Yanagida, K Nakamura, M Yoshida Materials Transactions 56 (8), 1233-1241, 2015 | 28 | 2015 |
Prediction and Experimental Validation of Cooling Rate Dependence of Viscoplastic Properties in a Partially Solidified State of Al–5 mass% Mg Alloy R Hirohara, Y Kawada, R Takai, M Otaki, T Okane, M Yoshida Materials Transactions 58 (9), 1299-1307, 2017 | 16 | 2017 |
Experimental and numerical analysis of grain refinement effect on hot tearing susceptibility for Al–Mg alloys R Takai, N Endo, R Hirohara, T Tsunoda, M Yoshida The International Journal of Advanced Manufacturing Technology 100 (5-8 …, 2019 | 14 | 2019 |
A new theoretical approach based on the Maxwell model to obtain rheological properties of solidifying alloys and its validation A Matsushita, R Takai, H Ezaki, T Okane, M Yoshida Metallurgical and Materials Transactions A 48, 1701-1707, 2017 | 13 | 2017 |
Influence of solid cohesion on viscous properties in Norton law for aluminum alloys during partial solidification Y Nagata, R Takai, T Okane, MK Faiz, M Yoshida Materials Science and Engineering: A 832, 142339, 2022 | 8 | 2022 |
Effect of temperature field and mechanical properties of casting on prediction of hot tearing tendency using FEM thermal stress analysis R Takai, T Tsunoda, Y Kawada, R Hirohara, T Okane, M Yoshida Materials Transactions 59 (8), 1333-1340, 2018 | 8 | 2018 |
Controlling factor for maximum tensile stress and elongation of aluminum alloy during partial solidification R Takai, R Hirohara, N Endo, Y Nagata, T Okane, M Yoshida Materials Transactions 60 (11), 2406-2415, 2019 | 7 | 2019 |
アルミニウム合金およびマグネシウム合金の鋳造時の凝固割れ感受性 (その 2) 高井量資, 大瀧光弘, 吉田誠 軽金属 68 (2), 79-90, 2018 | 4 | 2018 |
On optimising ring-rolling manufacturability of C&W Nickel superalloys for aero-engine turbine disc F Adziman, R Takai, YT Tang, S Ishikawa, D Barba, E Alabort, A Nemeth, ... Superalloys 2020: Proceedings of the 14th International Symposium on …, 2020 | 3 | 2020 |
アルミニウム合金およびマグネシウム合金の鋳造時の凝固割れ感受性 (その 1) 高井量資, 大瀧光弘, 吉田誠 軽金属 68 (1), 23-32, 2018 | 3 | 2018 |
Alloy Design and Microstructural Evolution During Heat Treatment of Newly Developed Cast and Wrought Ni-Base Superalloy M647 for Turbine Disk Application K Sugiyama, Y Sumi, N Kanno, M Higashi, R Takai, S Ishikawa, K Sasaki Superalloys 2020: Proceedings of the 14th International Symposium on …, 2020 | 2 | 2020 |
Measurement of viscous properties on Al-5mass% Mg alloy in semi-solid state by tensile test with high-frequency induction heating Y Nagata, R Onizawa, M Someya, H Kotaki, R Takai, M Ebata, T Okane, ... Keikinzoku/Journal of Japan Institute of Light Metals 71 (2), 112-120, 2021 | 1 | 2021 |
Development and application of new cast and wrought Ni-base superalloy M647 for turbine disk N Kanno, M Higashi, R Takai, S Ishikawa, K Sasaki, K Sugiyama, Y Sumi Superalloys 2020: Proceedings of the 14th International Symposium on …, 2020 | 1 | 2020 |
高周波誘導加熱引張試験による半凝固状態の Al-5mass% Mg 合金の粘性特性の取得 永田益大, 鬼澤力也, 染谷方哉, 小瀧皓, 高井量資, 江端幹夫, 岡根利光, ... 軽金属 71 (2), 112-120, 2021 | | 2021 |
熱応力解析による鋳造凝固割れ予測 高井量資, 吉田誠 軽金属 69 (8), 400-409, 2019 | | 2019 |
半凝固状態のAl–Mg合金の構成モデルの構築とFEM熱応力解析による凝固割れ予測 高井量資 早稲田大学, 2017 | | 2017 |
2000 年以降のアルミニウム合金の固液共存状態の引張特性とその試験法 高井量資, 木下翔舞, 吉田誠 鋳造工学 87 (8), 589-597, 2015 | | 2015 |