| Aerodynamic effects of forward blade skew in axial flow rotors of controlled vortex design J Vad, ARA Kwedikha, C Horváth, M Balczó, MM Lohász, T Régert Proceedings of the Institution of Mechanical Engineers, Part A: Journal of …, 2007 | 70 | 2007 |
| Limitations of phased array beamforming in open rotor noise source imaging C Horváth, E Envia, GG Podboy AIAA journal 52 (8), 1810-1817, 2014 | 69 | 2014 |
| Beamforming investigation of dominant counter-rotating open rotor tonal and broadband noise sources C Horváth AIAA Journal 53 (6), 1602-1611, 2015 | 52 | 2015 |
| Highly Accurate Experimental Heave Decay Tests with a Floating Sphere: A Public Benchmark Dataset for Model Validation of Fluid–Structure Interaction B Kramer, Morten, J Andersen, S Thomas, B Bendixen, Flemming, ... Energies, 2021 | 27 | 2021 |
| Aerodynamic and aero-acoustic improvement of electric motor cooling equipment J Vad, C Horváth, JG Kovács Proceedings of the Institution of Mechanical Engineers, Part A: Journal of …, 2014 | 21 | 2014 |
| Broadband noise source model acoustical investigation on unskewed and skewed axial flow fan rotor cascades C Horváth, J Vad Proc. Conference on Modelling Fluid Flow (CMFF’09), Budapest, Hungary, 682-689, 2009 | 21 | 2009 |
| Phased array noise source localization measurements made on a Williams International FJ44 engine G Podboy, C Horvath 15th AIAA/CEAS aeroacoustics conference (30th AIAA aeroacoustics conference …, 2009 | 19 | 2009 |
| Beamforming method for extracting the broadband noise sources of counter-rotating open rotors K Tokaji, B Soós, C Horváth AIAA Journal 58 (7), 3028-3039, 2020 | 18 | 2020 |
| Investigation of a pylons effect on the character of counter-rotating open rotor noise using beamforming technology B Fenyvesi, K Tokaji, C Horváth Acta Acustica united with Acustica 105 (1), 56-65, 2019 | 17 | 2019 |
| Reevaluating Noise Sources Appearing on the Axis for Beamforming Maps of Rotating Sources C Horváth, B Tóth, P Tóth, T Benedek, J Vad Institution of Mechanical Engineers, 2015 | 13 | 2015 |
| Application of a combined method for the investigation of turbomachinery noise sources: Beamforming and proper orthogonal decomposition B Fenyvesi, J Kriegseis, C Horváth 25th AIAA/CEAS Aeroacoustics Conference, 2637, 2019 | 11 | 2019 |
| An automated method for the identification of interaction tone noise sources on the beamforming maps of counter-rotating rotors B Fenyvesi, J Kriegseis, C Horváth Physics of Fluids 34 (4), 2022 | 9 | 2022 |
| Redesign of an electric motor cooling fan for reduction of fan noise and absorbed power J Vad, H Cs, MM Lohász, D Jesch, L Molnár, G Koscsó, L Nagy, I Dániel, ... Proceedings of the 9th European Conference on Turbomachinery Fluid Dynamics …, 2011 | 8 | 2011 |
| The impact of the vortex design method on the stall behavior of axial flow fan and compressor rotors J Vad, C Horva´ th Turbo Expo: Power for Land, Sea, and Air 43161, 229-238, 2008 | 8 | 2008 |
| Combined effects of controlled vortex design and forward blade skew on the three-dimensional flow in axial flow rotors J Vad, ARA Kwedikha, C Horváth Conference on Modelling Fluid Flow (CMFF’06), Budapest, 1139-1146, 2006 | 8 | 2006 |
| Acoustically transparent duct K Tokaji, C Horváth International Journal of Aeroacoustics 17 (3), 238-258, 2018 | 7 | 2018 |
| Investigation on the Nonconstant Behavior of a Vortex Flow Meter with Narrow Gauge Pipe via Conducting Measurements and Numerical Simulations B Fenyvesi, C Horváth Periodica Polytechnica Mechanical Engineering 61 (3), 247-254, 2017 | 7 | 2017 |
| Shock characteristics measured upstream of both a forward-swept and an aft-swept Fan GG Podboy, MJ Krupar, DL Sutliff, C Horvath Turbo Expo: Power for Land, Sea, and Air 47950, 1455-1478, 2007 | 6 | 2007 |
| Investigation of turbomachinery noise sources using beamforming technology and proper orthogonal decomposition methods B Fenyvesi, E Simon, J Kriegseis, C Horváth CFD. HU Kft., 2018 | 5 | 2018 |
| Combining signal pre-processing methods with beamforming for broadband turbomachinery applications K Tokaji, C Horváth | 5 | 2018 |
Vad JánosÁramlástan Tanszék, Gépészmérnöki Kar, Budapesti Műszaki és Gazdaságtudományi Egyetem在 ara.bme.hu 的电子邮件经过验证
