Adaptive prognosis of lithium-ion batteries based on the combination of particle filters and radial basis function neural networks C Sbarufatti, M Corbetta, M Giglio, F Cadini Journal of Power Sources 344, 128-140, 2017 | 210 | 2017 |
Investigations on sandwich core properties through an experimental–numerical approach M Giglio, A Manes, A Gilioli Composites Part B: Engineering 43 (2), 361-374, 2012 | 140 | 2012 |
Numerical investigation of a three point bending test on sandwich panels with aluminum skins and Nomex™ honeycomb core M Giglio, A Gilioli, A Manes Computational Materials Science 56, 69-78, 2012 | 139 | 2012 |
State-of-life prognosis and diagnosis of lithium-ion batteries by data-driven particle filters F Cadini, C Sbarufatti, F Cancelliere, M Giglio Applied energy 235, 661-672, 2019 | 129 | 2019 |
Experimental tests and numerical modelling of ballistic impacts against Kevlar 29 plain-woven fabrics with an epoxy matrix: Macro-homogeneous and Meso-heterogeneous approaches LM Bresciani, A Manes, A Ruggiero, G Iannitti, M Giglio Composites Part B: Engineering 88, 114-130, 2016 | 127 | 2016 |
Ductile fracture locus of Ti–6Al–4V titanium alloy M Giglio, A Manes, F Vigano International Journal of Mechanical Sciences 54 (1), 121-135, 2012 | 117 | 2012 |
Anti-icing and de-icing coatings based Joule's heating of graphene nanoplatelets O Redondo, SG Prolongo, M Campo, C Sbarufatti, M Giglio Composites Science and Technology 164, 65-73, 2018 | 112 | 2018 |
Analysis of strain rate behavior of an Al 6061 T6 alloy A Manes, L Peroni, M Scapin, M Giglio Procedia Engineering 10, 3477-3482, 2011 | 110 | 2011 |
Life prediction of a wire rope subjected to axial and bending loads M Giglio, A Manes Engineering failure analysis 12 (4), 549-568, 2005 | 108 | 2005 |
Predicting ballistic impact failure of aluminium 6061-T6 with the rate-independent Bao–Wierzbicki fracture model A Gilioli, A Manes, M Giglio, T Wierzbicki International Journal of impact engineering 76, 207-220, 2015 | 90 | 2015 |
Compression after impact test (CAI) on NOMEX™ honeycomb sandwich panels with thin aluminum skins A Gilioli, C Sbarufatti, A Manes, M Giglio Composites Part B: Engineering 67, 313-325, 2014 | 90 | 2014 |
Definition of a load adaptive baseline by inverse finite element method for structural damage identification L Colombo, C Sbarufatti, M Giglio Mechanical Systems and Signal Processing 120, 584-607, 2019 | 83 | 2019 |
Perforation and penetration of aluminium target plates by armour piercing bullets A Manes, F Serpellini, M Pagani, M Saponara, M Giglio International Journal of Impact Engineering 69, 39-54, 2014 | 79 | 2014 |
Effect of riveting process parameters on the local stress field of a T-joint A Manes, M Giglio, F Viganò International Journal of Mechanical Sciences 53 (12), 1039-1049, 2011 | 69 | 2011 |
An experimental–numerical investigation on aluminium tubes subjected to ballistic impact with soft core 7.62 ball projectiles A Manes, D Lumassi, L Giudici, M Giglio Thin-Walled Structures 73, 68-80, 2013 | 67 | 2013 |
Influence of projectile and thickness on the ballistic behavior of aramid composites: Experimental and numerical study SG Nunes, R Scazzosi, A Manes, SC Amico, WF de Amorim Júnior, ... International Journal of Impact Engineering 132, 103307, 2019 | 66 | 2019 |
A methodology for automatic crack propagation modelling in planar and shell FE models D Colombo, M Giglio Engineering Fracture Mechanics 73 (4), 490-504, 2006 | 65 | 2006 |
Application of sensor technologies for local and distributed structural health monitoring C Sbarufatti, A Manes, M Giglio Structural Control and Health Monitoring 21 (7), 1057-1083, 2014 | 62 | 2014 |
Numerical study on the dynamic progressive failure due to low-velocity repeated impacts in thin CFRP laminated composite plates M Rezasefat, A Gonzalez-Jimenez, M Giglio, A Manes Thin-Walled Structures 167, 108220, 2021 | 61 | 2021 |
Performance optimization of a diagnostic system based upon a simulated strain field for fatigue damage characterization C Sbarufatti, A Manes, M Giglio Mechanical Systems and Signal Processing 40 (2), 667-690, 2013 | 60 | 2013 |