A progressive failure model for composite laminates subjected to low velocity impact damage MV Donadon, L Iannucci, BG Falzon, JM Hodgkinson, SFM de Almeida Computers & Structures 86 (11-12), 1232-1252, 2008 | 468 | 2008 |
Delamination threshold load for dynamic impact on plates R Olsson, MV Donadon, BG Falzon International Journal of solids and structures 43 (10), 3124-3141, 2006 | 257 | 2006 |
Ballistic impact simulation of an armour-piercing projectile on hybrid ceramic/fiber reinforced composite armours D Bürger, AR De Faria, SFM De Almeida, FCL De Melo, MV Donadon International Journal of Impact Engineering 43, 63-77, 2012 | 144 | 2012 |
A 3-D micromechanical model for predicting the elastic behaviour of woven laminates MV Donadon, BG Falzon, L Iannucci, JM Hodgkinson Composites Science and Technology 67 (11-12), 2467-2477, 2007 | 89 | 2007 |
A Three‐Dimensional Ply Failure Model for Composite Structures MV Donadon, SFM De Almeida, MA Arbelo, AR de Faria International Journal of Aerospace Engineering 2009 (1), 486063, 2009 | 78 | 2009 |
Vibration correlation technique for the estimation of real boundary conditions and buckling load of unstiffened plates and cylindrical shells MA Arbelo, SFM De Almeida, MV Donadon, SR Rett, R Degenhardt, ... Thin-Walled Structures 79, 119-128, 2014 | 76 | 2014 |
Flutter suppression of plates using passive constrained viscoelastic layers AG Cunha-Filho, AMG De Lima, MV Donadon, LS Leão Mechanical Systems and Signal Processing 79, 99-111, 2016 | 66 | 2016 |
A numerical study on the impact resistance of composite shells using an energy based failure model NO Yokoyama, MV Donadon, SFM De Almeida Composite Structures 93 (1), 142-152, 2010 | 63 | 2010 |
Intralaminar toughness characterisation of unbalanced hybrid plain weave laminates MV Donadon, BG Falzon, L Iannucci, JM Hodgkinson Composites Part A: Applied Science and Manufacturing 38 (6), 1597-1611, 2007 | 60 | 2007 |
Numerical prediction of compression after impact behavior of woven composite laminates PAAE Mendes, MV Donadon Composite Structures 113, 476-491, 2014 | 48 | 2014 |
Stiffening effects on the natural frequencies of laminated plates with piezoelectric actuators MV Donadon, SFM Almeida, AR De Faria Composites Part B: Engineering 33 (5), 335-342, 2002 | 47 | 2002 |
Assembly of semi-analytical models to address linear buckling and vibration of stiffened composite panels with debonding defect SGP Castro, MV Donadon Composite Structures 160, 232-247, 2017 | 45 | 2017 |
Moisture effect on the mechanical properties of additively manufactured continuous carbon fiber‐reinforced Nylon‐based thermoplastic BC Kikuchi, FLS Bussamra, MV Donadon, RTL Ferreira, RCM Sales Polymer Composites 41 (12), 5227-5245, 2020 | 41 | 2020 |
Aeroelastic behavior of composite laminated shells with embedded SMA wires under supersonic flow MV Donadon, AR de Faria Aerospace Science and Technology 52, 157-166, 2016 | 40 | 2016 |
Effect of fiber orientation on the compressive response of plain weave carbon fiber/epoxy composites submitted to high strain rates VL Reis, CV Opelt, GM Cândido, MC Rezende, MV Donadon Composite Structures 203, 952-959, 2018 | 35 | 2018 |
Intraply failure criterion for unidirectional fiber reinforced composites by means of asymptotic homogenization RQ de Macedo, RTL Ferreira, JM Guedes, MV Donadon Composite Structures 159, 335-349, 2017 | 35 | 2017 |
Flutter suppression of plates subjected to supersonic flow using passive constrained viscoelastic layers and Golla–Hughes–McTavish method AG Cunha-Filho, AMG De Lima, MV Donadon, LS Leão Aerospace Science and Technology 52, 70-80, 2016 | 35 | 2016 |
The effect of piezoelectrically induced stress stiffening on the aeroelastic stability of curved composite panels A Almeida, MV Donadon, AR De Faria, SFM De Almeida Composite Structures 94 (12), 3601-3611, 2012 | 35 | 2012 |
Optimization of composite plates subjected to buckling and small mass impact using lamination parameters RZG Bohrer, SFM de Almeida, MV Donadon Composite Structures 120, 141-152, 2015 | 34 | 2015 |
Delamination analysis using cohesive zone model: A discussion on traction-separation law and mixed-mode criteria LA de Oliveira, MV Donadon Engineering Fracture Mechanics 228, 106922, 2020 | 32 | 2020 |