A review: Past, present and future of grain refining of magnesium castings E Karakulak Journal of Magnesium and Alloys 7 (3), 355-369, 2019 | 167 | 2019 |
Influence of Cu addition on microstructure and hardness of near-eutectic Al-Si-xCu-alloys M Zeren, E Karakulak, S Gümüş Transactions of Nonferrous Metals Society of China 21 (8), 1698-1702, 2011 | 130 | 2011 |
Influence of Ti addition on the microstructure and hardness properties of near-eutectic Al–Si alloys M Zeren, E Karakulak Journal of Alloys and Compounds 450 (1-2), 255-259, 2008 | 112 | 2008 |
Effect of heat treatment on the tribological properties of Al–Cu–Mg/nanoSiC composites R Yamanoğlu, E Karakulak, A Zeren, M Zeren Materials & Design 49, 820-825, 2013 | 60 | 2013 |
Effect of Cu content on the corrosion of Al‐Si eutectic alloys in acidic solutions S Zor, M Zeren, H Ozkazanc, E Karakulak Anti-Corrosion Methods and Materials 57 (4), 185-191, 2010 | 50 | 2010 |
Characterisation of nickel alloy powders processed by spark plasma sintering R Yamanoglu, W Bradbury, E Karakulak, EA Olevsky, RM German Powder Metallurgy 57 (5), 380-386, 2014 | 43 | 2014 |
Effect of heat treatment on erosive wear behaviour of Ti6Al4V alloy S Fidan, E Avcu, E Karakulak, R Yamanoglu, M Zeren, T Sinmazcelik Materials science and Technology 29 (9), 1088-1094, 2013 | 39 | 2013 |
Effect of Si addition on microstructure and wear properties of Mg-Sn as-cast alloys E Karakulak, YB Küçüker Journal of magnesium and alloys 6 (4), 384-389, 2018 | 31 | 2018 |
Failure analysis of wire-breaks in aluminum conductor production and investigation of early failure reasons for transmission lines S Karabay, AT Ertürk, M Zeren, R Yamanoğlu, E Karakulak Engineering Failure Analysis 83, 47-56, 2018 | 29 | 2018 |
Investigation of corrosion and mechanical properties of Al–Cu–SiC–xNi composite alloys E Karakulak, R Yamanoğlu, U Erten, A Zeren, S Zor, M Zeren Materials & Design 59, 33-37, 2014 | 29 | 2014 |
Characterization of Cu–Ti powder metallurgical materials E Karakulak International Journal of Minerals, Metallurgy, and Materials 24, 83-90, 2017 | 26 | 2017 |
Microstructural chracterisation of Al–Si–xTi cast alloys M Zeren, E Karakulak Materials Science and Technology 25 (10), 1211-1214, 2009 | 22 | 2009 |
Effect of nickel on microstructure and wear behaviour of pure aluminium against steel and alumina counterfaces R Yamanoglu, E Karakulak, M Zeren, FG Koç International Journal of Cast Metals Research 26 (5), 289-295, 2013 | 21 | 2013 |
Study on hardness and microstructural characteristics of sand cast Al-Si-Cu alloys M Zeren, E Karakulak Bulletin of Materials Science 32, 617-620, 2009 | 18 | 2009 |
Mechanical properties of hypoeutectic Al-Ni alloys with Al3Ni intermetallics E Karakulak, FG Koç, R Yamanoglu, M Zeren Materials Testing 58 (2), 117-121, 2016 | 16 | 2016 |
Effect of heat treatment conditions on microstructure and wear behaviour of Al4Cu2Ni2Mg alloy E Karakulak, M Zeren, R Yamanoğlu Transactions of Nonferrous Metals Society of China 23 (7), 1898-1904, 2013 | 16 | 2013 |
Mechanical and wear properties of pre-alloyed molybdenum P/M steels with nickel addition R Yamanoglu, E Karakulak, M Zeren Journal of Mining and Metallurgy, Section B: Metallurgy 48 (2), 251-258, 2012 | 9 | 2012 |
Degassing of aluminum alloy melts by high shear melt conditioning technology: An overview J Lazaro-Nebreda, JB Patel, E Lordan, Y Zhang, E Karakulak, K Al-Helal, ... Metals 12 (10), 1772, 2022 | 8 | 2022 |
Effects of different heat treatments on microstructure, toughness and wear behavior of GX 10CrNiMoNb 18-10 cast austenitic stainless steel M Türker, AT Ertürk, E Karakulak, EA Güven Transactions of the Indian Institute of Metals 71, 1033-1040, 2018 | 8 | 2018 |
Mechanical properties of Al-Ni cast alloys FG Koç, E Karakulak, R Yamanoğlu, M Zeren Proceedings of the 23rd international conference on metallurgy and materials …, 2014 | 7 | 2014 |