| Heat transfer performance of a finned metal foam-phase change material (FMF-PCM) system incorporating triply periodic minimal surfaces (TPMS) ZA Qureshi, E Elnajjar, O Al-Ketan, RA Al-Rub, SB Al-Omari International Journal of Heat and Mass Transfer 170, 121001, 2021 | 152 | 2021 |
| Using triply periodic minimal surfaces (TPMS)-based metal foams structures as skeleton for metal-foam-PCM composites for thermal energy storage and energy management applications ZA Qureshi, SAB Al-Omari, E Elnajjar, O Al-Ketan, RA Al-Rub International Communications in Heat and Mass Transfer 124, 105265, 2021 | 100 | 2021 |
| Using PCM embedded in building material for thermal management: Performance assessment study E Elnajjar Energy and Buildings 151, 28-34, 2017 | 73 | 2017 |
| Hydrogen supplement co-combustion with diesel in compression ignition engine MO Hamdan, MYE Selim, SAB Al-Omari, E Elnajjar Renewable energy 82, 54-60, 2015 | 72 | 2015 |
| Experimental investigation of dual engine performance using variable LPG composition fuel E Elnajjar, MO Hamdan, MYE Selim Renewable Energy 56, 110-116, 2013 | 62 | 2013 |
| Experimental study of dual fuel engine performance using variable LPG composition and engine parameters E Elnajjar, MYE Selim, MO Hamdan Energy conversion and Management 76, 32-42, 2013 | 61 | 2013 |
| On the effect of porosity and functional grading of 3D printable triply periodic minimal surface (TPMS) based architected lattices embedded with a phase change material RAAR Z Qureshi, S Al-Omari, E Elnajjar, O Al-Ketan International Journal of Heat and Mass Transfer 183 (Part (B)), 122111, 2021 | 57* | 2021 |
| Photo-thermal characteristics of water-based Fe3O4@ SiO2 nanofluid for solar-thermal applications S Khashan, S Dagher, S Al Omari, N Tit, E Elnajjar, B Mathew, ... Materials Research Express 4 (5), 055701, 2017 | 51 | 2017 |
| Thermal characterization of 3D-Printed lattices based on triply periodic minimal surfaces embedded with organic phase change material ZA Qureshi, SAB Al Omari, E Elnajjar, F Mahmoud, O Al-Ketan, RA Al-Rub Case Studies in Thermal Engineering 27, 101315, 2021 | 49 | 2021 |
| Experimental analysis on vortex tube energy separation performance MO Hamdan, A Alawar, E Elnajjar, W Siddique Heat and mass transfer 47, 1637-1642, 2011 | 47 | 2011 |
| Nozzle parameters affecting vortex tube energy separation performance MO Hamdan, B Alsayyed, E Elnajjar Heat and Mass Transfer 49, 533-541, 2013 | 42 | 2013 |
| CI engine performance and emissions with waste cooking oil biodiesel boosted with hydrogen supplement under different load and engine parameters E Elnajjar, SAB Al-Omari, MYE Selim, STP Purayil Alexandria Engineering Journal 61 (6), 4793-4805, 2022 | 40 | 2022 |
| Review of hydrogen–gasoline SI dual fuel engines: Engine performance and emission STP Purayil, MO Hamdan, SAB Al-Omari, MYE Selim, E Elnajjar Energy Reports 9, 4547-4573, 2023 | 33 | 2023 |
| Nature-inspired triply periodic minimal surface-based structures in sheet and solid configurations for performance enhancement of a low-thermal-conductivity phase-change … ZA Qureshi, SAB Al-Omari, E Elnajjar, O Al-Ketan, RA Al-Rub International Journal of Thermal Sciences 173, 107361, 2022 | 33 | 2022 |
| CFD simulation of the magnetophoretic separation in a microchannel SA Khashan, E Elnajjar, Y Haik Journal of Magnetism and Magnetic Materials 323 (23), 2960-2967, 2011 | 33 | 2011 |
| Numerical simulation of the continuous biomagnetic separation in a two-dimensional channel SA Khashan, E Elnajjar, Y Haik International journal of multiphase flow 37 (8), 947-955, 2011 | 33 | 2011 |
| Subcritical water extraction of phenolics, antioxidants and dietary fibres from waste date pits MTM Bing Li, Maham Akram, Sulaiman Al-Zuhair, Emad Elnajjar Journal of Environmental Chemical Engineering, 2020 | 32 | 2020 |
| A heat sink integrating fins within high thermal conductivity phase change material to cool high heat-flux heat sources MF Salah Al-Omari, Zahid Qureshi, Emad Elnajjar International Journal of Thermal Sciences 172 (Part A), 107190, 2022 | 30 | 2022 |
| Thermal management characteristics of a counter-intuitive finned heat sink incorporating detached fins impregnated with a high thermal conductivity-low melting point PCM SAB Al-Omari, ZA Qureshi, F Mahmoud, E Elnajjar International Journal of Thermal Sciences 175, 107396, 2022 | 28 | 2022 |
| Vibration-enhanced direct contact heat exchange using gallium as a solid phase change material SAB Al Omari, AM Ghazal, E Elnajjar, ZA Qureshi International Communications in Heat and Mass Transfer 120, 104990, 2021 | 28 | 2021 |
S. A. B. Al OmariProfessor of Mechanical Engineering, UAE University在 uaeu.ac.ae 的电子邮件经过验证
