Effective efficiency assessment of a solar air heater having baffles spaced with different successive ratios NM Phu, PB Thao, NV Hap Case Studies in Thermal Engineering 28, 101486, 2021 | 37 | 2021 |
Thermal-hydraulic characteristics and optimization of a liquid-to-suction triple-tube heat exchanger V Tuyen, N Van Hap, NM Phu Case Studies in Thermal Engineering 19, 100635, 2020 | 32 | 2020 |
Performance Evaluation of a Solar Air Heater Roughened with Conic-Curve Profile Ribs Based on Efficiencies and Entropy Generation NM Phu, NV Hap Arabian Journal for Science and Engineering, 2020 | 29 | 2020 |
Influence of inlet water temperature on heat transfer and pressure drop of dehumidifying air coil using analytical and experimental methods NM Phu, N Van Hap Case Studies in Thermal Engineering 18, 100581, 2020 | 29 | 2020 |
Analytical predictions of exergoeconomic performance of a solar air heater with surface roughness of metal waste NM Phu, TT Bao, HN Hung, NT Tu, NV Hap Journal of Thermal Analysis and Calorimetry, 2020 | 28 | 2020 |
Thermohydraulic performance and entropy generation of a triple-pass solar air heater with three inlets NM Phu, NT Tu, NV Hap Energies 14 (19), 6399, 2021 | 21 | 2021 |
Enhancement of exit flow uniformity by modifying the shape of a gas torch to obtain a uniform temperature distribution on a steel plate during preheating TT Ngo, J Go, T Zhou, HV Nguyen, GS Lee Applied Sciences 8 (11), 2197, 2018 | 13 | 2018 |
Performance investigation of solar-heating ocean thermal energy conversion (SH-OTEC) in Korea VH Nguyen, GS Lee Transactions of the Korean Society of Mechanical Engineers B 37 (1), 43-49, 2013 | 9 | 2013 |
Heat transfer in double-pass solar air heater: mathematical models and solution strategy N Van Hap, NM Phu Heat Transfer-Fundamentals, Enhancement and Applications, 2022 | 6 | 2022 |
Numerical Investigation of Natural Convection and Entropy Generation of Water near Density Inversion in a Cavity Having Circular and Elliptical Body NM Phu, N Van Hap Computational Overview of Fluid Structure Interaction 121, 2020 | 6 | 2020 |
Improvement of the steel-plate temperature during preheating by using guide vanes to focus the flame at the outlet of a gas torch TT Ngo, T Zhou, J Go, HV Nguyen, GS Lee Energies 12 (5), 869, 2019 | 6 | 2019 |
Computational fluid dynamics analysis for basement ventilation in case of a fire H Van Nguyen, TTM Nguyen, PM Nguyen, TT Ngo Journal of Advanced Marine Engineering and Technology 44, 333-337, 2020 | 4 | 2020 |
Thermohydraulic performance augmentation in a solar air heater using a perforated circular segment vortex generator N Van Hap, PT Nhan, HP Hien, NM Phu Environmental Science and Pollution Research 30 (24), 65338-65350, 2023 | 3 | 2023 |
New design of a hot mixing chamber for lowering its surface temperature by adopting a perforated inner cylinder TT Ngo, T Zhou, HV Nguyen, PM Nguyen, GS Lee Journal of Mechanical Science and Technology 35, 5723-5731, 2021 | 3 | 2021 |
Design optimization of heat exchangers for solar-heating ocean thermal energy conversion (SH-OTEC) using high-performance commercial tubes T Zhou, VH Nguyen, GS Lee Transactions of the Korean Society of Mechanical Engineers B 40 (9), 557-567, 2016 | 3 | 2016 |
Impact of the V cap on induced turbulent air flow in a solar chimney: a computational study P Nguyen Minh, K Nguyen Hoang, H Nguyen Van J. Therm. Eng 9, 1-12, 2022 | 2 | 2022 |
A One-dimensional Analysis and Optimum Air Flow Rate of a Triple-Pass Solar Air Heater NM Phu, N Van Hap, PT Nhan, HP Hien 2021 24th International Conference on Mechatronics Technology (ICMT), 1-5, 2021 | 2 | 2021 |
Enhancement of mixing and temperature distribution of steel pipes inside an annealing furnace by adopting a modified inlet structure TT Ngo, VH Nguyen, GS Lee 대한기계학회 춘추학술대회, 792-796, 2018 | 2 | 2018 |
Design and analysis of a radial turbine for ocean thermal energy conversion VH Nguyen, GS Lee Transactions of the Korean Society of Mechanical Engineers B 39 (3), 207-214, 2015 | 2 | 2015 |
Design and analysis of a radial turbine for ocean thermal energy conversion N Van Hap, GS Lee 대한기계학회 춘추학술대회, 4046-4050, 2013 | 2 | 2013 |