| X-ray diffraction (XRD) techniques for materials characterization J Epp Materials Characterization Using Nondestructive Evaluation (NDE) Methods, 81-124, 2016 | 482 | 2016 |
| Validation of Mechanical Layer Equivalent Method for simulation of residual stresses in additive manufactured components M Siewert, F Neugebauer, J Epp, V Ploshikhin Computers & Mathematics with Applications 78 (7), 2407-2416, 2019 | 50 | 2019 |
| In situ X-ray phase analysis and computer simulation of carbide dissolution of ball bearing steel at different austenitizing temperatures J Epp, H Surm, O Kessler, T Hirsch Acta Materialia 55 (17), 5959-5967, 2007 | 48 | 2007 |
| In situ X-Ray Diffraction Analysis of Carbon Partitioning During Quenching of Low Carbon Steel J Epp, T Hirsch, C Curfs Metallurgical and Materials Transactions A 43, 2210-2217, 2012 | 43 | 2012 |
| Deformation behavior of spray-formed hypereutectic Al–Si alloys C Cui, A Schulz, J Epp, HW Zoch Journal of materials science 45, 2798-2807, 2010 | 43 | 2010 |
| Residual stress relaxation during heating of bearing rings produced in two different manufacturing chains J Epp, H Surm, T Hirsch, F Hoffmann Journal of Materials Processing Technology 211 (4), 637-643, 2011 | 39 | 2011 |
| Comparison of Different Manufacturing Processes of AISI 4140 Steel with Regard to Surface Modification and Its Influencing Depth F Borchers, B Clausen, S Eckert, L Ehle, J Epp, S Harst, M Hettig, A Klink, ... Metals 10 (7), 895, 2020 | 33 | 2020 |
| Material Modifications Caused by Thermal and Mechanical Load During Grinding S Jermolajev, J Epp, C Heinzel, E Brinksmeier Procedia CIRP 45, 43-46, 2016 | 32 | 2016 |
| Investigation of the Influence Factors on Distortion in Induction-Hardened Steel Shafts Manufactured from Cold-Drawn Rod J Dong, J Epp, A da Silva Rocha, RM Nunes, HW Zoch Metallurgical and Materials Transactions A 47 (2), 877-888, 2016 | 31 | 2016 |
| Detection of surface damages in ground spur gears by non-destructive micromagnetic methods D Sackmann, B Karpuschewski, J Epp, R Jedamski FORSCHUNG IM INGENIEURWESEN-ENGINEERING RESEARCH 83 (3), 563-570, 2019 | 22 | 2019 |
| Potential of magnetic Barkhausen noise analysis for in-process monitoring of surface layer properties of steel components in grinding R Jedamski, J Heinzel, M Rößler, J Epp, J Eckebrecht, J Gentzen, M Putz, ... tm-Technisches Messen 87 (12), 787-798, 2020 | 20 | 2020 |
| Descriptors for High Throughput in Structural Materials Development M Steinbacher, G Alexe, M Baune, I Bobrov, I Bösing, B Clausen, ... High-Throughput 8 (4), 22, 2019 | 20 | 2019 |
| Influence of Hot Forging Parameters on a Low Carbon Continuous Cooling Bainitic Steel Microstructure ACF Silveira, WL Bevilaqua, VW Dias, PJ de Castro, J Epp, AS Rocha Metals 10 (5), 601, 2020 | 19 | 2020 |
| Analysis of cyclic phase transformations during additive manufacturing of hardenable tool steel by in-situ X-ray diffraction experiments J Epp, J Dong, H Meyer, A Bohlen Scripta Materialia 177, 27-31, 2020 | 19 | 2020 |
| Influence of Process Fluctuations on Residual Stress Evolution in Rotary Swaging of Steel Tubes S Ishkina, D Charni, M Herrmann, Y Liu, J Epp, C Schenck, B Kuhfuss, ... Materials 12 (6), 855, 2019 | 19 | 2019 |
| Non-destructive micromagnetic determination of hardness and case hardening depth using linear regression analysis and artificial neural networks R Jedamski, J Epp Metals 11 (1), 18, 2020 | 18 | 2020 |
| Comparative Study of the Tempering Behavior of Different Martensitic Steels by Means of In-Situ Diffractometry and Dilatometry M Hunkel, J Dong, J Epp, D Kaiser, S Dietrich, V Schulze, A Rajaei, ... Materials 13 (22), 5058, 2020 | 17 | 2020 |
| In Situ Investigation of the Bainitic Transformation from Deformed Austenite During Continuous Cooling in a Low Carbon Mn-Si-Cr-Mo Steel W Lemos Bevilaqua, J Epp, H Meyer, A Da Silva Rocha, H Roelofs Metallurgical and Materials Transactions A 51, 3627-3637, 2020 | 16 | 2020 |
| Combined Neutron and X-Ray Diffraction Analysis for the Characterization of a Case Hardened Disc J Epp, T Hirsch, M Hunkel, RC Wimpory Materials Science Forum 652, 37-43, 2010 | 16 | 2010 |
| Residual stress state characterization of machined components by X-ray diffraction and multiparameter micromagnetic methods J Epp, T Hirsch Experimental mechanics 50, 195-204, 2010 | 16 | 2010 |
