| The influence of exposure energy density on porosity and microhardness of the SLM additive manufactured elements J Kluczyński, L Śnieżek, K Grzelak, J Mierzyński Materials 11 (11), 2304, 2018 | 67 | 2018 |
| A critical review on effect of process parameters on mechanical and microstructural properties of powder-bed fusion additive manufacturing of ss316l M Gor, H Soni, V Wankhede, P Sahlot, K Grzelak, I Szachgluchowicz, ... Materials 14 (21), 6527, 2021 | 56 | 2021 |
| Microstructure and low cycle fatigue properties of AA5083 H111 friction stir welded joint J Torzewski, K Grzelak, M Wachowski, R Kosturek Materials 13 (10), 2381, 2020 | 37 | 2020 |
| Influence of selective laser melting technological parameters on the mechanical properties of additively manufactured elements using 316L austenitic steel J Kluczyński, L Śnieżek, K Grzelak, J Janiszewski, P Płatek, J Torzewski, ... Materials 13 (6), 1449, 2020 | 33 | 2020 |
| The examination of restrained joints created in the process of multi-material FFF additive manufacturing technology J Kluczyński, L Śnieżek, A Kravcov, K Grzelak, P Svoboda, ... Materials 13 (4), 903, 2020 | 31 | 2020 |
| Density prediction in powder bed fusion additive manufacturing: machine learning-based techniques M Gor, A Dobriyal, V Wankhede, P Sahlot, K Grzelak, J Kluczyński, ... Applied Sciences 12 (14), 7271, 2022 | 25 | 2022 |
| Crack growth behavior of additively manufactured 316L steel—influence of build orientation and heat treatment J Kluczyński, L Śnieżek, K Grzelak, J Torzewski, I Szachogłuchowicz, ... Materials 13 (15), 3259, 2020 | 25 | 2020 |
| Comparison of different heat treatment processes of selective laser melted 316L steel based on analysis of mechanical properties J Kluczyński, L Śnieżek, K Grzelak, A Oziębło, K Perkowski, J Torzewski, ... Materials 13 (17), 3805, 2020 | 23 | 2020 |
| Cement-glass composite bricks (CGCB) with interior 3D printed PET-G scaffolding M Małek, K Grzelak, W Łasica, M Jackowski, J Kluczyński, ... Journal of Building Engineering 52, 104429, 2022 | 22 | 2022 |
| The influence of heat treatment on low cycle fatigue properties of selectively laser melted 316l steel J Kluczyński, L Śnieżek, K Grzelak, J Torzewski, I Szachogłuchowicz, ... Materials 13 (24), 5737, 2020 | 19 | 2020 |
| Additive manufacturing of plastics used for protection against COVID19—The influence of chemical disinfection by alcohol on the properties of ABS and PETG polymers K Grzelak, J Łaszcz, J Polkowski, P Mastalski, J Kluczyński, J Łuszczek, ... Materials 14 (17), 4823, 2021 | 17 | 2021 |
| The influence of layer re-melting on tensile and fatigue strength of selective laser melted 316L steel JM Kluczyński, L Śnieżek, K Grzelak, J Torzewski Intelligent Technologies in Logistics and Mechatronics Systems, 2018 | 17 | 2018 |
| An experimental investigation of propagation the semi-elliptical surface cracks in an austenitic steel L Śnieżek, T Ślęzak, K Grzelak, V Hutsaylyuk International Journal of Pressure Vessels and Piping 144, 35-44, 2016 | 16 | 2016 |
| Microstructure and mechanical properties of dissimilar friction stir welded joint aa7020/aa5083 with different joining parameters J Torzewski, M Łazińska, K Grzelak, I Szachogłuchowicz, J Mierzyński Materials 15 (5), 1910, 2022 | 15 | 2022 |
| Modification of structural properties using process parameters and surface treatment of monolithic and thin-walled parts obtained by selective laser melting K Grzelak, J Kluczyński, I Szachogłuchowicz, J Łuszczek, L Śnieżek, ... Materials 13 (24), 5662, 2020 | 15 | 2020 |
| Hot isostatic pressing influence on the mechanical properties of selectively laser-melted 316L steel J Kluczyński, L Śnieżek, K Grzelak, A Oziębło, K Perkowski, J Torzewski, ... Bulletin of the Polish Academy of Sciences. Technical Sciences 68 (6), 2020 | 15 | 2020 |
| Fatigue and fracture of additively manufactured polyethylene terephthalate glycol and acrylonitrile butadiene styrene polymers J Kluczyński, I Szachogłuchowicz, J Torzewski, L Śnieżek, K Grzelak, ... International Journal of Fatigue 165, 107212, 2022 | 13 | 2022 |
| Study of the mechanical properties components made by SLM additive technology L Śniezek, K Grzelak, J Torzewski, J Kluczyński Proceedings of the 11th International Conference on Intelligent Technologies …, 2016 | 12 | 2016 |
| The Influence of Layer Thickness on the Microstructure and Mechanical Properties of M300 Maraging Steel Additively Manufactured by LENS® Technology N Rońda, K Grzelak, M Polański, J Dworecka-Wójcik Materials 15 (2), 603, 2022 | 11 | 2022 |
| Bending Strength of Polyamide-Based Composites Obtained during the Fused Filament Fabrication (FFF) Process M Mazurkiewicz, J Kluczyński, K Jasik, B Sarzyński, I Szachogłuchowicz, ... Materials 15 (14), 5079, 2022 | 10 | 2022 |
