Effect of friction stir welding on microstructure, tensile and fatigue properties of the AA7005/10 vol.% Al2O3p composite L Ceschini, I Boromei, G Minak, A Morri, F Tarterini Composites science and technology 67 (3-4), 605-615, 2007 | 319 | 2007 |
Low velocity impact and compression after impact tests on thin carbon/epoxy laminates D Ghelli, G Minak Composites Part B: Engineering 42 (7), 2067-2079, 2011 | 238 | 2011 |
Hydroelasticity in water-entry problems: Comparison between experimental and SPH results R Panciroli, S Abrate, G Minak, A Zucchelli Composite Structures 94 (2), 532-539, 2012 | 219 | 2012 |
Low velocity impact properties of intra-ply hybrid composites based on basalt and nylon woven fabrics MT Dehkordi, H Nosraty, MM Shokrieh, G Minak, D Ghelli Materials & Design 31 (8), 3835-3844, 2010 | 213 | 2010 |
Tensile and fatigue properties of the AA6061/20 vol% Al2O3p and AA7005/10 vol% Al2O3p composites L Ceschini, G Minak, A Morri Composites Science and Technology 66 (2), 333-342, 2006 | 178 | 2006 |
Impact and post-impact damage characterisation of hybrid composite laminates based on basalt fibres in combination with flax, hemp and glass fibres manufactured by vacuum infusion R Petrucci, C Santulli, D Puglia, E Nisini, F Sarasini, J Tirillo, L Torre, ... Composites Part B: Engineering 69, 507-515, 2015 | 175 | 2015 |
Influence of electrospun Nylon 6, 6 nanofibrous mats on the interlaminar properties of Gr–epoxy composite laminates R Palazzetti, A Zucchelli, C Gualandi, ML Focarete, L Donati, G Minak, ... Composite structures 94 (2), 571-579, 2012 | 162 | 2012 |
The effect of interleaved composite nanofibrous mats on delamination behavior of polymeric composite materials H Saghafi, A Zucchelli, R Palazzetti, G Minak Composite Structures 109, 41-47, 2014 | 156 | 2014 |
Microstructure, tensile and fatigue properties of AA6061/20 vol.% Al2O3p friction stir welded joints L Ceschini, I Boromei, G Minak, A Morri, F Tarterini Composites Part A: Applied Science and Manufacturing 38 (4), 1200-1210, 2007 | 156 | 2007 |
The influence of hybridization on impact damage behavior and residual compression strength of intraply basalt/nylon hybrid composites MT Dehkordi, H Nosraty, MM Shokrieh, G Minak, D Ghelli Materials & Design 43, 283-290, 2013 | 149 | 2013 |
Standard characterization for mechanical properties of photopolymer resins for rapid prototyping C Fragassa, G Minak 1st Symposium on Multidisciplinary Studies of Design in Mechanical …, 2008 | 143 | 2008 |
Correlation of acoustic emission with finite element predicted damages in open-hole tensile laminated composites R Mohammadi, MA Najafabadi, M Saeedifar, J Yousefi, G Minak Composites Part B: Engineering 108, 427-435, 2017 | 136 | 2017 |
An integrated approach based on acoustic emission and mechanical information to evaluate the delamination fracture toughness at mode I in composite laminate AR Oskouei, A Zucchelli, M Ahmadi, G Minak Materials & Design 32 (3), 1444-1455, 2011 | 133 | 2011 |
Fatigue properties of friction stir welded particulate reinforced aluminium matrix composites G Minak, L Ceschini, I Boromei, M Ponte International Journal of Fatigue 32 (1), 218-226, 2010 | 117 | 2010 |
Forging of the AA2618/20 vol.% Al2O3p composite: Effects on microstructure and tensile properties L Ceschini, G Minak, A Morri Composites Science and Technology 69 (11-12), 1783-1789, 2009 | 109 | 2009 |
Recovery of carbon fibers from cured and uncured carbon fiber reinforced composites wastes and their use as feedstock for a new composite production L Giorgini, T Benelli, L Mazzocchetti, C Leonardi, G Zattini, G Minak, ... Polymer composites 36 (6), 1084-1095, 2015 | 107 | 2015 |
Delamination evaluation of composite laminates with different interface fiber orientations using acoustic emission features and micro visualization M Nikbakht, J Yousefi, H Hosseini-Toudeshky, G Minak Composites Part B: Engineering 113, 185-196, 2017 | 106 | 2017 |
Mechanical behaviour of jute cloth/wool felts hybrid laminates C Santulli, F Sarasini, J Tirillò, T Valente, M Valente, AP Caruso, ... Materials & Design 50, 309-321, 2013 | 102 | 2013 |
Analysis of damage mechanisms in drilling of composite materials by acoustic emission NZ Karimi, G Minak, P Kianfar Composite Structures 131, 107-114, 2015 | 101 | 2015 |
Fabrication, process simulation and testing of a thick CFRP component using the RTM process E Poodts, G Minak, L Mazzocchetti, L Giorgini Composites Part B: Engineering 56, 673-680, 2014 | 98 | 2014 |