| The corrosion behavior and mechanical properties of 5083 Al-Mg alloy manufactured by additive friction stir deposition Y Li, B Yang, M Zhang, H Wang, W Gong, R Lai, Y Li, J Teng Corrosion Science 213, 110972, 2023 | 51 | 2023 |
| Cu-Cr-Mg alloy with both high strength and high electrical conductivity manufactured by powder metallurgy process Y Li, B Yang, P Zhang, Y Nie, X Yuan, Q Lei, Y Li Materials Today Communications 27, 102266, 2021 | 36 | 2021 |
| Influence of minor Ag addition on the microstructure and properties of powder metallurgy Cu-10 wt% Fe alloy P Zhang, X Yuan, Y Li, Y Zhou, R Lai, Y Li, Q Lei, A Chiba Journal of Alloys and Compounds 904, 163983, 2022 | 35 | 2022 |
| Hierarchical microstructure and strengthening mechanism of Cu-36.8 Fe alloy manufactured by selective laser melting Y Li, X Yuan, B Yang, X Ye, P Zhang, H Lang, Q Lei, J Liu, Y Li Journal of Alloys and Compounds 895, 162701, 2022 | 27 | 2022 |
| Microstructure and mechanical properties of Al–Li alloy manufactured by additive friction stir deposition Y Li, M Zhang, H Wang, R Lai, B Yang, Y Li Materials Science and Engineering: A 887, 145753, 2023 | 21 | 2023 |
| Preheating-assisted solid-state friction stir repair of Al-Mg-Si alloy plate at different rotational speeds H Wang, Y Li, M Zhang, W Gong, R Lai, Y Li International Journal of Minerals, Metallurgy and Materials 31 (4), 725-736, 2024 | 13 | 2024 |
| Effect of Heat Treatment States of Feedstock on the Microstructure and Mechanical Properties of AA2219 Layers Deposited by Additive Friction Stir Deposition M Zhang, X Ye, Y Li, H Wang, R Lai, Y Li Materials 16 (24), 7591, 2023 | 10 | 2023 |
| Influence of Preheating Temperature on the Microstructure and Mechanical Properties of 6061/TA1 Composite Plates Fabricated by AFSD W Gong, Y Li, M Zhang, H Wang, Q Liu, Z Zeng, K Ma, B Yang, R Lai, Y Li Materials 16 (17), 6018, 2023 | 9 | 2023 |
| Effect of overlapping deposition strategy on microstructure and mechanical properties of Al-clad steel by AFSD Y Li, H Wang, R Lai, B Yang, Z Wang, Y Li Journal of Manufacturing Processes 129, 51-61, 2024 | 6 | 2024 |
| Repairing the 7075 Al alloy plate by additive friction stir deposition with different feedstock rods H Wang, Y Li, M Zhang, W Gong, Q Liu, Z Zeng, K Ma, R Lai, Y Li The International Journal of Advanced Manufacturing Technology 134 (1), 921-933, 2024 | 6 | 2024 |
| Stress-level dependency of creep ageing behavior for the nugget zone in a friction stir welded Al–Cu–Li Alloy D Wang, L Zhan, C Liu, D He, R Lai, Y Li, Q Zeng, M Huang, S Hui Materials Science and Engineering: A 881, 145383, 2023 | 6 | 2023 |
| Study on creep aging behavior of the friction stir welded Al-Li alloy joints under different stresses D Wang, L Zhan, C Liu, Q Zeng, Y Xu, B Ma, K Gan, R Lai, Y Li, C Liu Materials Characterization 210, 113763, 2024 | 4 | 2024 |
| Aluminum/steel dissimilar material with high interfacial strength manufactured by additive friction stir deposition Y Li, B Yang, M Song, R Lai, B Liu, Y Liu, Z Wang, Y Li Journal of Manufacturing Processes 133, 491-502, 2025 | 1 | 2025 |
| Tribological behavior of AlSn20Cu alloy manufactured by additive friction stir deposition Z Zeng, Y Li, H Wang, R Lai, J Teng, Y Li Wear 560, 205606, 2025 | 1 | 2025 |
| Effect of different cooling conditions on microstructure and mechanical properties of Al-Zn-Mg-Cu alloys repaired by additive friction stir deposition H Wang, D Li, R Lai, Y Li, Z Wang, Y Li Materials Characterization, 114636, 2024 | | 2024 |
| Microstructure Evolution and Mechanical Properties of 16-Layer 2195 Al-Li Alloy Components Manufactured by Additive Friction Stir Deposition Q Liu, R Lai, H Wang, Y Li, Y Li, L Zhan Materials 17 (23), 5748, 2024 | | 2024 |
| Effect of temperature on creep aging behavior of the nugget zone of AA2195 AlLi alloy produced by friction stir welding D Wang, L Zhan, C Liu, D He, R Lai, Y Li, Q Zeng, M Huang Materials Characterization 217, 114408, 2024 | | 2024 |
