Characterization and performance of AlTiN, AlTiCrN, TiN/TiAlN PVD coated carbide tools while turning SS 304 AP Kulkarni, VG Sargade Materials and Manufacturing Processes 30 (6), 748-755, 2015 | 79 | 2015 |
Dry turning of AISI 304 austenitic stainless steel using AlTiCrN coated insert produced by HPPMS technique AP Kulkarni, GG Joshi, VG Sargade Procedia Engineering 64, 737-746, 2013 | 58 | 2013 |
Effect of cutting speed and surface chemistry of cutting tools on the formation of BUL or BUE and surface quality of the generated surface in dry turning of AA6005 aluminium alloy S Gangopadhyay, R Acharya, AK Chattopadhyay, VG Sargade Machining Science and Technology 14 (2), 208-223, 2010 | 54 | 2010 |
Metallurgy behind the cryogenic treatment of cutting tools: an overview SA Chopra, VG Sargade Materials Today: Proceedings 2 (4-5), 1814-1824, 2015 | 52 | 2015 |
Effect of coating thickness on the characteristics and dry machining performance of TiN film deposited on cemented carbide inserts using CFUBMS VG Sargade, S Gangopadhyay, S Paul, AK Chattopadhyay Materials and Manufacturing Processes 26 (8), 1028-1033, 2011 | 52 | 2011 |
Machinability studies of austenitic stainless steel (AISI 304) using PVD cathodic arc evaporation (CAE) system deposited AlCrN/TiAlN coated carbide inserts SS Wagh, AP Kulkarni, VG Sargade Procedia Engineering 64, 907-914, 2013 | 37 | 2013 |
Performance of PVD AlTiCrN coating during machining of austenitic stainless steel AP Kulkarni, GG Joshi, VG Sargade Surface Engineering 29 (5), 402-407, 2013 | 34 | 2013 |
Machinability study of duplex stainless steel 2205 during dry turning GD Sonawane, VG Sargade International Journal of Precision Engineering and Manufacturing 21, 969-981, 2020 | 32 | 2020 |
Analysis of surface roughness and cutting force during turning of Ti6Al4V ELI in dry environment V Sargade, S Nipanikar, S Meshram International Journal of Industrial Engineering Computations 7 (2), 257-266, 2016 | 31 | 2016 |
Machinability investigation of AISI 304 austenitic stainless steels using multilayer AlTiN/TiAlN coated carbide inserts A Kulkarni, V Sargade, C More Procedia Manufacturing 20, 548-553, 2018 | 25 | 2018 |
Surface Integrity of AISI 52100 Steel during Hard Turning in Different Near‐Dry Environments A Chavan, V Sargade Advances in Materials Science and Engineering 2020 (1), 4256308, 2020 | 24 | 2020 |
Investigation on cutting temperature and cutting force in turning AISI 304 austenitic stainless steel using AlTiCrN coated carbide insert AP Kulkarni, GG Joshi, A Karekar, VG Sargade International Journal of Machining and Machinability of Materials 2 15 (3-4 …, 2014 | 24 | 2014 |
Design optimization of cutting parameters for turning of AISI 304 austenitic stainless steel using Taguchi method A Kulkarni, G Joshi, VG Sargade NISCAIR-CSIR, India, 2013 | 23 | 2013 |
Evaluation and multi-objective optimization of nose wear, surface roughness and cutting forces using grey relation analysis (GRA) GD Sonawane, VG Sargade Journal of the Brazilian Society of Mechanical Sciences and Engineering 41, 1-13, 2019 | 17 | 2019 |
Optimization of process parameters through GRA, TOPSIS and RSA models S Nipanikar, V Sargade, R Guttedar International Journal of Industrial Engineering Computations 9 (1), 137-154, 2018 | 15 | 2018 |
Microstructure and mechanical properties of AlTiCrN, AlCrN coatings deposited by cathodic arc evaporation (PVD) technique S Huddedar, AP Kulkarni, G Joshi, V Sargade Proc. 21st Int. Conf. Process. Fab. Adv, Mater., Guwahati 1, 514-520, 2012 | 10 | 2012 |
Machinability studies of austenitic stainless steel (AISI 304) using PVD cathodic arc evaporation (CAE) system deposited AlCrN/TiAlN coated carbide inserts SW Swapnagandha, AP Kulkarni, VG Sargade Procedia Engineering 64, 907-914, 2013 | 7 | 2013 |
Studies on the characterization and machinability of duplex stainless steel 2205 during dry turning GD Sonawane, VG Sargade International Journal of Mechanical and Industrial Engineering 13 (5), 349-353, 2019 | 6 | 2019 |
Performance evaluation of HiPIMS, S3p and CAE deposited coatings during dry turning of Dss2205 GD Sonawane, VG Sargade Machining Science and Technology 26 (3), 396-427, 2022 | 5 | 2022 |
Effect of metallurgical parameters induced by manufacturing processes on photochemical machining of Co-Cr L605 alloy S Thorat, V Lonkar, A Pailwan, V Sargade, S Mudigonda Procedia CIRP 95, 149-154, 2020 | 5 | 2020 |