| Helmet design based on the optimization of biocomposite energy-absorbing liners under multi-impact loading FAO Fernandes, RJ Alves de Sousa, M Ptak, G Migueis Applied Sciences 9 (4), 735, 2019 | 75 | 2019 |
| Assessing impact velocity and temperature effects on crashworthiness properties of cork material M Ptak, P Kaczynski, FAO Fernandes, RJA de Sousa International Journal of Impact Engineering 106 (8), 238–248, 2017 | 61 | 2017 |
| Development and validation of a new finite element human head model-YEt Another Head Model (YEAHM) F Fernandes, D Tchepel, RJ Alves de Sousa, M Ptak Engineering Computations 35 (1), 477-496, 2018 | 58 | 2018 |
| Material and structural modeling aspects of brain tissue deformation under dynamic loads M Ratajczak, M Ptak, L Chybowski, K Gawdzińska, R Będziński Materials 12 (2), 271, 2019 | 52 | 2019 |
| Method to assess and enhance vulnerable road user safety during impact loading M Ptak Applied Sciences 9 (5), 1000, 2019 | 49 | 2019 |
| Detection of bridging veins rupture and subdural haematoma onset using a finite element head model GFJ Migueis, FAO Fernandes, M Ptak, M Ratajczak, RJA de Sousa Clinical Biomechanics 63, 104-111, 2019 | 45 | 2019 |
| Simulation tests of roll-over protection structure J Karliński, M Ptak, P Działak Archives of Civil and Mechanical Engineering 13 (1), 57-63, 2012 | 45 | 2012 |
| Development and testing of advanced cork composite sandwiches for energy-absorbing structures P Kaczyński, M Ptak, F AO Fernandes, L Chybowski, J Wilhelm, ... Materials 12 (5), 697, 2019 | 40 | 2019 |
| Strength analysis of bus superstructure according to Regulation No. 66 of UN/ECE J Karliński, M Ptak, P Działak, E Rusiński Archives of Civil and Mechanical Engineering 14, 342-353, 2014 | 40 | 2014 |
| High-energy impact testing of agglomerated cork at extremely low and high temperatures P Kaczynski, M Ptak, J Wilhelm, FAO Fernandes, RJA De Sousa International Journal of Impact Engineering 126, 109-116, 2019 | 34 | 2019 |
| Evaluation of kinematics of SUV to pedestrian impact—Lower leg impactor and dummy approach M Ptak, E Rusiński, J Karliński, S Dragan Archives of Civil and Mechanical Engineering 12, 68-73, 2012 | 34 | 2012 |
| The approach to mining safety improvement: Accident analysis of an underground machine operator J Karliński, M Ptak, P Działak, E Rusiński Archives of Civil and Mechanical Engineering 16, 503-512, 2016 | 29 | 2016 |
| Energy absorption of cast metal and composite foams tested in extremely low and high-temperatures P Kaczyński, M Ptak, K Gawdzińska Materials & Design 196, 109114, 2020 | 28 | 2020 |
| Head Injury Simulation in Road Traffic Accidents FAO Fernandes, RJA de Sousa, M Ptak Springer International Publishing, 2018 | 25 | 2018 |
| Computational modeling of skull bone structures and simulation of skull fractures using the YEAHM head model A Barbosa, FAO Fernandes, RJ Alves de Sousa, M Ptak, J Wilhelm Biology 9 (9), 267, 2020 | 24 | 2020 |
| Investigation of biomechanics of skull structures damages caused by dynamic loads M Ptak, M Ratajczak, A Kwiatkowski, M Sawicki, J Wilhelm, ... Acta of bioengineering and biomechanics 20 (4), 2018 | 24 | 2018 |
| Proactive failure prevention by human-machine interface in remote-controlled demolition robots D Derlukiewicz, M Ptak, S Koziołek New Advances in Information Systems and Technologies: Volume 2, 711-720, 2016 | 24 | 2016 |
| Injury biomechanics of a child’s head: Problems, challenges and possibilities with a new aHEAD finite element model J Wilhelm, M Ptak, FAO Fernandes, K Kubicki, A Kwiatkowski, ... Applied Sciences 10 (13), 4467, 2020 | 23 | 2020 |
| Numerical technologies for vulnerable road user safety enhancement M Ptak, K Konarzewski New Contributions in Information Systems and Technologies: Volume 2, 355-364, 2015 | 22 | 2015 |
| A kinematic model of a humanoid lower limb exoskeleton with pneumatic actuators S Głowiński, M Ptak Acta of Bioengineering and Biomechanics 24 (1), 145-157, 2022 | 21 | 2022 |
Fábio A.O. FernandesUniversity of Aveiro在 ua.pt 的电子邮件经过验证
