| Mechanically alloyed Al7075–TiC nanocomposite: Powder processing, consolidation and mechanical strength A Azimi, A Shokuhfar, O Nejadseyfi Materials & Design (1980-2015) 66, 137-141, 2015 | 80 | 2015 |
| A comparison of the effects of severe plastic deformation and heat treatment on the tensile properties and impact toughness of aluminum alloy 6061 A Shokuhfar, O Nejadseyfi Materials Science and Engineering: A 594, 140-148, 2014 | 60 | 2014 |
| Combining equal-channel angular pressing and heat treatment to obtain enhanced corrosion resistance in 6061 aluminum alloy O Nejadseyfi, A Shokuhfar, A Dabiri, A Azimi Journal of Alloys and Compounds 648, 912-918, 2015 | 57 | 2015 |
| Optimizing consolidation behavior of Al 7068–TiC nanocomposites using Taguchi statistical analysis A Azimi, A Shokuhfar, O Nejadseyfi, H Fallahdoost, S Salehi Transactions of Nonferrous Metals Society of China 25 (8), 2499-2508, 2015 | 36 | 2015 |
| Improving homogeneity of ultrafine-grained/nanostructured materials produced by ECAP using a bevel-edge punch O Nejadseyfi, A Shokuhfar, A Azimi, M Shamsborhan Journal of materials science 50 (3), 1513-1522, 2015 | 27 | 2015 |
| Microstructure, mechanical and tribological behavior of hot-pressed mechanically alloyed Al–Zn–Mg–Cu powders A Azimi, H Fallahdoost, O Nejadseyfi Materials & Design 75, 1-8, 2015 | 24 | 2015 |
| The influence of friction on the processing of ultrafine-grained/nanostructured materials by equal-channel angular pressing A Shokuhfar, O Nejadseyfi Journal of materials engineering and performance 23 (3), 1038-1048, 2014 | 22 | 2014 |
| Segmentation of copper alloys processed by equal-channel angular pressing O Nejadseyfi, A Shokuhfar, V Moodi Transactions of Nonferrous Metals Society of China 25 (8), 2571-2580, 2015 | 11 | 2015 |
| Experimental and numerical comparison of equal channel angular extrusion (ECAE) with planar twist channel angular extrusion (PTCAE) M Shamsborhan, A Shokuhfar, O Nejadseyfi, J Kakemam, M Moradi Proceedings of the Institution of Mechanical Engineers, Part C: Journal of …, 2015 | 10 | 2015 |
| Evaluation and assessment of non-normal output during robust optimization O Nejadseyfi, HJM Geijselaers, AH van den Boogaard Structural and multidisciplinary optimization 59 (6), 2063-2076, 2019 | 9 | 2019 |
| Robust optimization based on analytical evaluation of uncertainty propagation O Nejadseyfi, H Geijselaers, T van den Boogaard Engineering Optimization, 2018 | 9 | 2018 |
| Feasibility of attaining uniform grain structure and enhanced ductility in aluminum alloy by employing a beveled punch in equal-channel angular pressing O Nejadseyfi, A Shokuhfar, S Sadeghi Materials Science and Engineering: A 651, 461-466, 2016 | 8 | 2016 |
| Molecular dynamics simulation of the effects of crystal orientation and grain boundary misorientation angle on the nano-crack growth O Nejadseyfi, A Shokuhfar Journal of Computational and Theoretical Nanoscience 11 (10), 2199-2207, 2014 | 7 | 2014 |
| A Numerical Study of the Influence of Gas Diffusion Layer Porosity on Cell Performance of Counter Flow Proton Exchange Membrane Fuel Cells A Shokuhfar, O Nejadseyfi, A Zolriasatein Iranian (Iranica) Journal of Energy & Environment 4 (2), 2012 | 3 | 2012 |
| Accounting for non-normal distribution of input variables and their correlations in robust optimization O Nejadseyfi, HJM Geijselaers, EH Atzema, M Abspoel, ... Optimization and Engineering, 1-27, 2021 | 2 | 2021 |
| From specified product tolerance to acceptable material and process scatter: an inverse robust optimization approach O Nejadseyfi, HJM Geijselaers, EH Atzema, M Abspoel, ... International journal of material forming 13 (3), 467-478, 2020 | 2 | 2020 |
| Efficient calculation of uncertainty propagation with an application in robust optimization of forming processes O Nejadseyfi, HJM Geijselaers, AH van den Boogaard AIP conference proceedings 1896 (1), 100004, 2017 | 2 | 2017 |
| Robust Optimization and Tailoring of Scatter in Metal Forming Processes O Nejadseyfi Gildeprint, 2019 | 1 | 2019 |
| Tailoring material scatter for metal forming processes based on inverse robust optimization O Nejadseyfi, HJM Geijselaers, AH van den Boogaard AIP Conference Proceedings 2113 (1), 120005, 2019 | 1 | 2019 |
| The effect of inclusion shape and distribution in bending of DP steel sheet O Nejadseyfi, H Geijselaers, T van den Boogaard International Conference on Computational Methods in Manufacturing Processes, 2016 | | 2016 |
Ali ShokuhfarProfessor of Materials Science ,K.N.Toosi University of Technology在 kntu.ac.ir 的电子邮件经过验证
