关注
Chen Wenzhen
Chen Wenzhen
在 hit.edu.cn 的电子邮件经过验证
标题
引用次数
引用次数
年份
Static recrystallization kinetics of a heavily cold drawn AZ31 magnesium alloy under annealing treatment
HY Chao, HF Sun, WZ Chen, ED Wang
Materials Characterization 62 (3), 312-320, 2011
1402011
Effect of deformation temperature on texture and mechanical properties of ZK60 magnesium alloy sheet rolled by multi-pass lowered-temperature rolling
W Wang, W Chen, W Zhang, G Cui, E Wang
Materials Science and Engineering: A 712, 608-615, 2018
952018
Microstructure and mechanical properties of thin ZK61 magnesium alloy sheets by extrusion and multi–pass rolling with lowered temperature
LX Zhang, WZ Chen, WC Zhang, WK Wang, E Wang
Journal of Materials Processing Technology 237, 65-74, 2016
802016
Texture dependence of uniform elongation for a magnesium alloy
WZ Chen, X Wang, ED Wang, ZY Liu, LX Hu
Scripta Materialia 67 (10), 858-861, 2012
612012
Preparation of TiBw/Ti–6Al–4V composite with an inhomogeneous reinforced structure by a canned hot extrusion process
W Zhang, M Wang, W Chen, Y Feng, Y Yu
Journal of Alloys and Compounds 669, 79-90, 2016
562016
Evolution of microstructure, texture and mechanical properties of ZK60 magnesium alloy in a single rolling pass
W Wang, G Cui, W Zhang, W Chen, E Wang
Materials Science and Engineering: A 724, 486-492, 2018
532018
Microstructure evolution and mechanical properties of P/M Ti-22Al-25Nb alloy during hot extrusion
JL Yang, GF Wang, WC Zhang, WZ Chen, XY Jiao, KF Zhang
Materials Science and Engineering: A 699, 210-216, 2017
532017
Precipitation behavior of silicide and synergetic strengthening mechanisms in TiB-reinforced high-temperature titanium matrix composites during multi-directional forging
S Sun, E Zhao, C Hu, Y An, W Chen
Journal of Alloys and Compounds 867, 159051, 2021
522021
Microstructure, texture evolution and yield strength symmetry improvement of as-extruded ZK60 Mg alloy via multi-directional impact forging
C Cui, W Zhang, W Chen, J He, X Chen, J Hou
Journal of Magnesium and Alloys 10 (10), 2745-2760, 2022
492022
Mechanical anisotropy improvement in ultrafine-grained ZK61 magnesium alloy rods fabricated by cyclic extrusion and compression
WC Zhang, Y Yu, XN Zhang, WZ Chen, ED Wang
Materials Science and Engineering: A 600, 181-187, 2014
472014
Effect of initial texture on the bending behavior, microstructure and texture evolution of ZK60 magnesium alloy during the bending process
W Wang, W Zhang, W Chen, G Cui, E Wang
Journal of Alloys and Compounds 737, 505-514, 2018
452018
Weakened anisotropy of mechanical properties in rolled ZK60 magnesium alloy sheets with elevated deformation temperature
W Wang, W Chen, W Zhang, G Cui, E Wang
Journal of Materials Science & Technology 34 (11), 2042-2050, 2018
432018
Microstructures evolution, texture characteristics and mechanical properties of Mg-2.5 Nd-0.5 Zn-0.5 Zr alloy during the high strain rate hot-rolling
S Wang, W Zhang, H Wang, J Yang, W Chen, G Cui, G Wang
Materials Science and Engineering: A 803, 140488, 2021
422021
Yield strength behavior for rolled magnesium alloy sheets with texture variation
WZ Chen, X Wang, MN Kyalo, ED Wang, ZY Liu
Materials Science and Engineering: A 580, 77-82, 2013
422013
Optimization of rolling temperature for ZK61 alloy sheets via microstructure uniformity analysis
WZ Chen, Y Yu, X Wang, ED Wang, ZY Liu
Materials Science and Engineering: A 575, 136-143, 2013
402013
Fabrication of ZK60 magnesium alloy thin sheets with improved ductility by cold rolling and annealing treatment
W Chen, X Wang, L Hu, E Wang
Materials & Design 40, 319-323, 2012
402012
Microstructure, texture and mechanical properties of extruded AZ31 Mg alloy during small strain multi-directional forging with gradient cooling
C Cui, J He, W Wang, W Chen, W Zhang
Journal of Alloys and Compounds 909, 164795, 2022
372022
Improved tension/compression asymmetry achieved in high-strength magnesium alloys via compression-extrusion process
H Wang, L Zhang, W Chen, D Fang, W Zhang, G Cui
Materials Science and Engineering: A 736, 239-247, 2018
362018
Influence of large cold strain on the microstructural evolution for a magnesium alloy subjected to multi-pass cold drawing
WZ Chen, WC Zhang, HY Chao, LX Zhang, ED Wang
Materials Science and Engineering: A 623, 92-96, 2015
352015
Improvement of tension/compression asymmetry for high-performance ZK61 magnesium alloy rod via tailoring deformation parameters: Upsetting-extrusion temperature and upsetting ratio
WJ Wu, WZ Chen, LX Zhang, XM Chen, HX Wang, WK Wang, WC Zhang
Materials Science and Engineering: A 823, 141767, 2021
292021
系统目前无法执行此操作,请稍后再试。
文章 1–20