Simulation of grain coarsening in two dimensions by cellular-automaton J Geiger, A Roósz, P Barkoczy Acta materialia 49 (4), 623-629, 2001 | 181 | 2001 |
Measurement of the interlamellar spacing of pearlite GF Vander Voort, A Roosz Metallography 17 (1), 1-17, 1984 | 151 | 1984 |
Numerical calculation of microsegregation in coarsened dendritic microstructures A Roosz, E Halder, HE Exner Materials science and technology 2 (11), 1149-1155, 1986 | 137 | 1986 |
Isothermal formation of austenite in eutectoid plain carbon steel A Roosz, Z Gacsi, EG Fuchs Acta Metallurgica 31 (4), 509-517, 1983 | 125 | 1983 |
Numerical modelling of dendritic solidification in aluminium-rich Al Cu Mg alloys A Roosz, HE Exner Acta Metallurgica et Materialia 38 (2), 375-380, 1990 | 78 | 1990 |
Solute redistribution during solidification and homogenization of binary solid solution A Roosz, Z Gacsi, EG Fuchs Acta Metallurgica 32 (10), 1745-1754, 1984 | 51 | 1984 |
Undercooling effects in microsegregation modelling T Kraft, M Rettenmayr, A Roosz Scripta materialia 35 (1), 1996 | 47 | 1996 |
Numerical analysis of solid and liquid diffusion in microsegregation of binary alloys A Roósz, E Halder, HE Exner Materials science and technology 1 (12), 1057-1062, 1985 | 42 | 1985 |
The effect of cooling rate and composition on the secondary dendrite arm spacing during solidification. Part I: Al-Cu-Si alloys V Ronté, A RoÓlSz International Journal of cast metals research 13 (6), 337-342, 2001 | 37 | 2001 |
Columnar and equiaxed solidification of Al-7 wt.% Si alloys in reduced gravity in the framework of the CETSOL project G Zimmermann, L Sturz, H Nguyen-Thi, N Mangelinck-Noël, YZ Li, ... Jom 69, 1269-1279, 2017 | 24 | 2017 |
Ternary restricted-equilibrium phase diagrams—II. Practical application: Aluminium-rich corner of the Al Cu Mg system A Roósz, HE Exner Acta Metallurgica et Materialia 38 (10), 2009-2016, 1990 | 23 | 1990 |
Thermodynamics-based semi-empirical description of the liquidus surface and partition coefficients in ternary Al-Mg-Si alloy A Roósz, J Farkas, G Kaptay Materials Science Forum 414, 323-328, 2002 | 20 | 2002 |
On the possible mechanisms of porosity formation during laser melt injection (LMI) technology G Buza, V Janó, M Svéda, O Verezub, Z Kálazi, G Kaptay, A Roósz Materials Science Forum 589, 79-84, 2008 | 19 | 2008 |
Solidification of Al 6Zn 2Mg alloy after laser remelting A Roósz, I Teleszky, F Boros, G Buza Materials Science and Engineering: A 173 (1-2), 351-354, 1993 | 18 | 1993 |
The Effect of Temperature Gradient and Primary Arm Tip Velocity on Secondary Dendrite Arm Spacing at Steady-state Conditions Solidification A Roósz Cast Metals 1 (4), 223-226, 1988 | 18 | 1988 |
Consolidation of Cu58Zr42 amorphous/nanocrystalline powders by PM K Tomolya, D Janovszky, T Janvari, A Sycheva, F Tranta, J Solyom, ... Journal of alloys and compounds 536, S154-S158, 2012 | 17 | 2012 |
MICAST–Microstructure Formation in Casting of technical alloys under diffusive and magnetically controlled convective conditions L Ratke, S Steinbach, G Müller, M Hainke, A Roósz, Y Fautrelle, ... Materials Science Forum 508, 131-144, 2006 | 17 | 2006 |
The effect of melt flow induced by RMF on the meso-and micro-structure of unidirectionally solidified Al–7wt.% Si alloy Benchmark experiment under magnetic stirring Z Veres, A Roósz, A Rónaföldi, A Sycheva, M Svéda Journal of Materials Science & Technology 103, 197-208, 2022 | 16 | 2022 |
A simple method for determining the true interlamellar spacing A Roósz, Z Gácsi, MK Baan Metallography 13 (4), 299-306, 1980 | 15 | 1980 |
Investigation of nanocrystalline sintered W-25 wt% Cu composite T Mikó, F Kristály, D Pethő, M Svéda, G Karacs, G Gergely, Z Gácsi, ... International Journal of Refractory Metals and Hard Materials 95, 105438, 2021 | 14 | 2021 |