| Friction compensation controller for load varying machine tool feed drive W Lee, CY Lee, YH Jeong, BK Min International Journal of Machine Tools and Manufacture 96, 47-54, 2015 | 52 | 2015 |
| Distributed component friction model for precision control of a feed drive system W Lee, CY Lee, YH Jeong, BK Min IEEE/ASME Transactions on Mechatronics 20 (4), 1966-1974, 2014 | 46 | 2014 |
| Simulation-based energy usage profiling of machine tool at the component level W Lee, CY Lee, BK Min International Journal of Precision Engineering and Manufacturing-Green …, 2014 | 46 | 2014 |
| Identification of mass and sliding friction parameters of machine tool feed drive using recursive least squares method CY Lee, SH Hwang, E Nam, BK Min The International Journal of Advanced Manufacturing Technology 109 (9), 2831 …, 2020 | 32 | 2020 |
| Mechanism of synergetic material removal by electrochemomechanical magnetorheological polishing KI Jang, E Nam, CY Lee, J Seok, BK Min International Journal of Machine Tools and Manufacture 70, 88-92, 2013 | 20 | 2013 |
| Electrochemical oxidation assisted micromachining of glassy carbon substrate W Lee, E Nam, CY Lee, KI Jang, BK Min International Journal of Precision Engineering and Manufacturing 16 (3), 419-422, 2015 | 14 | 2015 |
| Ductile mode electrochemical oxidation assisted micromachining for glassy carbon E Nam, CY Lee, MBG Jun, BK Min Journal of Micromechanics and Microengineering 25 (4), 045021, 2015 | 10 | 2015 |
| Effect of electrochemical conditions on material removal rate in electrochemical oxidation assisted machining E Nam, CY Lee, J Min, SJ Lee, BK Min Journal of The Electrochemical Society 164 (2), E23, 2017 | 7 | 2017 |
| CFRP Drilling Experiments: Investigation on Defect Behaviors and Material Interface Detection for Minimizing Delamination G Kim, TI Ha, CY Lee, JH Ahn, JY Kim, BK Min, TG Kim, SW Lee Journal of the Korean Society for Precision Engineering 33 (6), 453-458, 2016 | 7 | 2016 |
| Limiting Tool Path Error Generated by Corner Blending of CNC Interpolator CY Lee, J Min, BK Min Journal of the Korean Society for Precision Engineering 34 (10), 695-700, 2017 | 6 | 2017 |
| Feed drive model for machine tool energy consumption simulation W Lee, CY Lee, BK Min Transactions of the North American Manufacturing Research Institution of SME …, 2014 | 6 | 2014 |
| Simulation-based optimization of CNC interpolator parameters for machining accuracy improvement CY Lee, SH Hwang, BK Min The International Journal of Advanced Manufacturing Technology, 1-14, 2022 | 3 | 2022 |
| CNC Algorithms for Precision Machining: State of the Art Review CY Lee, SH Kim, TI Ha, J Min, SH Hwang, BK Min Journal of the Korean Society for Precision Engineering 35 (3), 279-291, 2018 | 2 | 2018 |
| 공작기계 이송계 요소부품의 마찰력 모델링 이원균， 이찬영， 권석범， 송창규， 이상조， 민병권 한국정밀공학회 학술발표대회 논문집, 233-234, 2013 | 2 | 2013 |
| NCK 모델 기반의 공작기계 이송계 제어특성 예측 이찬영， 오정석， 노승국， 황순홍， 민병권 한국생산제조학회 학술발표대회 논문집, 69-69, 2021 | | 2021 |
| 공작기계 디지털 트윈 기반의 이송계 위치제어 성능예측 황순홍， 임종민， 송원택， 이찬영， 민병권 한국생산제조학회 학술발표대회 논문집, 70-70, 2021 | | 2021 |
| 시뮬레이션 기반 공작기계 가공 시간 예측 이찬영， 황순홍， 민병권， 오정석 한국정밀공학회 학술발표대회 논문집, 91-91, 2021 | | 2021 |
| 장비/이송계/제어 통합모델을 이용한 고속 가공기 잔류진동 예측 김창주， 김대현， 정홍진， 이찬영， 오정석 한국정밀공학회 학술발표대회 논문집, 714-714, 2021 | | 2021 |
| CNC 내재형 이송계 모델을 활용한 가공오차 예측 황순홍， 임종민， 송원택， 이찬영， 민병권 한국정밀공학회 학술발표대회 논문집, 715-715, 2021 | | 2021 |
| 공구 경로 생성 모델을 활용한 공작기계 에너지 소비 예측 송원택， 이찬영， 황순홍， 신희민， 윤준영， 민병권 한국정밀공학회 학술발표대회 논문집, 192-192, 2021 | | 2021 |
